|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plated steel, universal design fits a 3/4 in Dia hole.
|
N 6658 is 7/8 in Dia anti-slam bumper that is installed onto the jamb with a screw. The bumper stands out 7/16 in from the surface it has been mounted to. It provides a protective anti-slam stop when closing bi-pass wardrobe doors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.
|
Plated steel, universal design fits a 3/4 in Dia hole.
|
Schlage Ives Rectangular Pull, 3-1/8 in W, 7/16 in D, 1-5/16 in H, Flush Mounting, Brass, Oil-Rubbed Bronze
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Schlage Ives Rectangular Pull, 3-1/8 in W, 7/16 in D, 1-5/16 in H, Flush Mounting, Brass, Satin Nickel
|
Schlage Ives Rectangular Pull, 3-1/8 in W, 7/16 in D, 1-5/16 in H, Flush Mounting, Brass, Satin Chrome
|
N 6760 is a 3-Piece adjustable floor guide. Made of white nylon, the 1 in tall guides at each end can be adjusted inward to accommodate doors 7/8 to 1-3/8 in thick. Used by many closet door manufacturers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6562 is a 3-Piece adjustable floor guide. Made of white nylon, the guides at each end can be adjusted inward to accommodate doors 3/4 to 1-3/8 in thick. Used by many closet door manufacturers. The guides extend 3/4 in from the floor. For taller guides see N 6760 or N 6761.
|
Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.
|
N 6563 is a white nylon floor guide for 1-3/8 in thick doors. A universal design. At 1-1/8 in tall, it provides a taller than normal guide for most standard thickness closet doors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6564 is a 3-Piece adjustable floor guide with adjustable slide sections. Made of white nylon, the 7/8 in tall guides can be adjusted to accommodate doors 3/4 to 1-3/8 in thick. Universal design used by many closet door manufacturers.
|
N 6761 is a 3-Piece adjustable floor guide. Made of white nylon, the 1-1/4 in tall guides at each end can be adjusted inward to accommodate doors 3/4 to 1-3/8 in thick. Used by many closet door manufacturers.
|
Fits Cox wardrobe doors in top-hung side-mounting applications. Steel offset adjustable bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick by-passing doors up to 50 lb. Includes 2 #8 x 3/4 in Phillips pan head screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits Acme wardrobe doors in top-hung side-mounting applications. Adjustable steel bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick doors. Includes six #8 x 3/4 in Phillips pan head screws. N 7030 and N 7031 have nickel steel brackets.
|
Fits Cox wardrobe doors in top-hung side-mounting applications. Steel offset adjustable bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick by-passing doors up to 50 lb. Includes 2 #8 x 3/4 in Phillips pan head screws.
|
National Hardware Sliding Door Hanger, Adjustable, 60 lb Weight, Plastic/Steel, Suitable for: 3/4 to 1-3/8 in Bypass Door
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware Sliding Door Hanger, Adjustable, 60 lb Weight, Plastic/Steel, Suitable for: 3/4 to 1-3/8 in Thick Doors
|
Fits Acme wardrobe doors in top-hung side-mounting applications. Adjustable steel bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick doors. Includes six #8 x 3/4 in Phillips pan head screws. N 7030 and N 7031 have nickel steel brackets.
|
Johnson Hardware Wheel Offset Hanger Set, Nylon/Steel, Top Mounting, Suitable for: 2200, 2200F and 2222 Series Bypassing Hardware Models, Includes: (2) 1/16 in Offset Single Wheel Sliding Door Hangers
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.
|
Designed as an adjustable, guide for by-passing doors from 3/4 to 1-3/8 in thick. Keeps door properly aligned. Needs cardboard shim for proper spacing of 2 side sections. Includes screw.
|
Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6840 is an adjustable top hung, side mounted bracket with a 1/16 in offset and 7/8 in flat nylon roller used on the front sliding door panel. It fits 3/4 to 1-3/8 in thick doors.
|
N 6661 is a bi-pass floor guide that can be used universally on most wardrobe doors systems. The nylon guides are adjustable to accommodate 3/4 to 1-3/8 in closet doors. The carpet riser shim plates can raise the guides from 1/8 to 5/8 in above the floor to accommodate the height of the carpet.
|
N 6667 is a side mounted, top hung, adjustable wardrobe door roller assembly with a single 7/8 in convex nylon wheel for the front door panel. The stamped steel bracket assembly is adjustable and has a 1/4 in offset. It fits 3/4 to 1-3/8 in thick doors. Used on Atlas closet door systems.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6668 is a side mounted, top hung, adjustable wardrobe door roller assembly with a single 7/8 in convex nylon wheel for the back door panel. The stamped steel bracket assembly is adjustable and has a 1/2 in offset. It fits 3/4 to 1-3/8 in thick doors. Used on Atlas closet door systems. For front door panel see N 6667.
|
N 6560 is a 2-Piece adjustable floor guide. Made of white nylon, the guides can be adjusted to accommodate doors 3/4 to 1-3/8 in thick by using the slots in the stamped steel floor base. Used by many closet door manufacturers. The guides extend 5/8 in from the floor.
|
Johnson Hardware Wheel Offset Hanger Set, Nylon/Steel, Top Mounting, Suitable for: 2200, 2200F and 2222 Series Bypassing Hardware Models, Includes: (2) 3/8 in Offset Single Wheel Sliding Door Hangers
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits wardrobe doors in top-hung side-mounting applications. Offset adjustable steel bracket with 1/4 in W round edge nylon ball bearing wheel. For 3/4 to 1-3/8 in thick doors. Includes 2 #6 x 5/8 in and 1 #4 x 3/4 in Phillips pan head screws.
|
Plated steel, includes two brass nails for installation.
|
Schlage Ives Oval Pull, 1-5/16 in W, 14/32 in D, 3-9/16 in H, Flush Mounting, Brass, Oil-Rubbed Bronze
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Schlage Ives Oval Pull, 1-5/16 in W, 14/32 in D, 3-9/16 in H, Flush Mounting, Brass, Satin Nickel
|
Fits wardrobe doors in top-hung side-mounting applications. Offset adjustable steel bracket with 1/4 in W round edge nylon ball bearing wheel. For 3/4 to 1-3/8 in thick doors. Includes 2 #6 x 5/8 in and 1 #4 x 3/4 in Phillips pan head screws.
|
Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits Cox wardrobe doors in top-hung side-mounting applications. Offset adjustable steel bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick doors. Includes 3 #8 x 3/4 in Phillips pan head screws.
|
Top hung; offset adjustable bracket. Round edge nylon wheel. Fits 3/4 to 1-3/8 in thick doors; fits on Harvey. Contents: 1 roller assembly, 4 #8 x 1-1/4 in Phillips pan head sheet metal screws.
|
Nylon wheels require no lubrication. For 3/4 to 1-3/8 in thick doors. Cam-action dial permits fingertip adjustments in aligning door to jamb.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Nylon wheels require no lubrication. For 3/4 to 1-3/8 in thick doors. Cam-action dial permits fingertip adjustments in aligning door to jamb.
|
Fits wardrobe doors. Tandem, top mounting nylon wheels with adjustable steel bracket. Fits 3/4 to 1-3/4 in thick doors, fits on Acme.
|
Schlage Ives Rectangular Pull, 1-5/16 in W, 15/32 in D, 3-1/8 in H, Flush Mounting, Brass, Oil-Rubbed Bronze
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Schlage Ives Rectangular Pull, 1-5/16 in W, 15/32 in D, 3-1/8 in H, Flush Mounting, Brass, Satin Nickel
|
Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.
|
Plated steel, includes two brass nails for installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
Plated steel, includes two brass nails for installation.
|
|
|
