|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plated steel, universal design fits a 3/4 in Dia hole.
|
N 6658 is 7/8 in Dia anti-slam bumper that is installed onto the jamb with a screw. The bumper stands out 7/16 in from the surface it has been mounted to. It provides a protective anti-slam stop when closing bi-pass wardrobe doors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.
|
Plated steel, universal design fits a 3/4 in Dia hole.
|
Schlage Ives Rectangular Pull, 3-1/8 in W, 7/16 in D, 1-5/16 in H, Flush Mounting, Brass, Oil-Rubbed Bronze
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Schlage Ives Rectangular Pull, 3-1/8 in W, 7/16 in D, 1-5/16 in H, Flush Mounting, Brass, Satin Nickel
|
Schlage Ives Rectangular Pull, 3-1/8 in W, 7/16 in D, 1-5/16 in H, Flush Mounting, Brass, Satin Chrome
|
N 6760 is a 3-Piece adjustable floor guide. Made of white nylon, the 1 in tall guides at each end can be adjusted inward to accommodate doors 7/8 to 1-3/8 in thick. Used by many closet door manufacturers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6562 is a 3-Piece adjustable floor guide. Made of white nylon, the guides at each end can be adjusted inward to accommodate doors 3/4 to 1-3/8 in thick. Used by many closet door manufacturers. The guides extend 3/4 in from the floor. For taller guides see N 6760 or N 6761.
|
Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.
|
N 6563 is a white nylon floor guide for 1-3/8 in thick doors. A universal design. At 1-1/8 in tall, it provides a taller than normal guide for most standard thickness closet doors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6564 is a 3-Piece adjustable floor guide with adjustable slide sections. Made of white nylon, the 7/8 in tall guides can be adjusted to accommodate doors 3/4 to 1-3/8 in thick. Universal design used by many closet door manufacturers.
|
N 6761 is a 3-Piece adjustable floor guide. Made of white nylon, the 1-1/4 in tall guides at each end can be adjusted inward to accommodate doors 3/4 to 1-3/8 in thick. Used by many closet door manufacturers.
|
Fits Cox wardrobe doors in top-hung side-mounting applications. Steel offset adjustable bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick by-passing doors up to 50 lb. Includes 2 #8 x 3/4 in Phillips pan head screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits Acme wardrobe doors in top-hung side-mounting applications. Adjustable steel bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick doors. Includes six #8 x 3/4 in Phillips pan head screws. N 7030 and N 7031 have nickel steel brackets.
|
Fits Cox wardrobe doors in top-hung side-mounting applications. Steel offset adjustable bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick by-passing doors up to 50 lb. Includes 2 #8 x 3/4 in Phillips pan head screws.
|
National Hardware Sliding Door Hanger, Adjustable, 60 lb Weight, Plastic/Steel, Suitable for: 3/4 to 1-3/8 in Bypass Door
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware Sliding Door Hanger, Adjustable, 60 lb Weight, Plastic/Steel, Suitable for: 3/4 to 1-3/8 in Thick Doors
|
Fits Acme wardrobe doors in top-hung side-mounting applications. Adjustable steel bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick doors. Includes six #8 x 3/4 in Phillips pan head screws. N 7030 and N 7031 have nickel steel brackets.
|
Johnson Hardware Wheel Offset Hanger Set, Nylon/Steel, Top Mounting, Suitable for: 2200, 2200F and 2222 Series Bypassing Hardware Models, Includes: (2) 1/16 in Offset Single Wheel Sliding Door Hangers
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.
|
Designed as an adjustable, guide for by-passing doors from 3/4 to 1-3/8 in thick. Keeps door properly aligned. Needs cardboard shim for proper spacing of 2 side sections. Includes screw.
|
Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6840 is an adjustable top hung, side mounted bracket with a 1/16 in offset and 7/8 in flat nylon roller used on the front sliding door panel. It fits 3/4 to 1-3/8 in thick doors.
|
N 6661 is a bi-pass floor guide that can be used universally on most wardrobe doors systems. The nylon guides are adjustable to accommodate 3/4 to 1-3/8 in closet doors. The carpet riser shim plates can raise the guides from 1/8 to 5/8 in above the floor to accommodate the height of the carpet.
|
N 6667 is a side mounted, top hung, adjustable wardrobe door roller assembly with a single 7/8 in convex nylon wheel for the front door panel. The stamped steel bracket assembly is adjustable and has a 1/4 in offset. It fits 3/4 to 1-3/8 in thick doors. Used on Atlas closet door systems.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6668 is a side mounted, top hung, adjustable wardrobe door roller assembly with a single 7/8 in convex nylon wheel for the back door panel. The stamped steel bracket assembly is adjustable and has a 1/2 in offset. It fits 3/4 to 1-3/8 in thick doors. Used on Atlas closet door systems. For front door panel see N 6667.
|
N 6560 is a 2-Piece adjustable floor guide. Made of white nylon, the guides can be adjusted to accommodate doors 3/4 to 1-3/8 in thick by using the slots in the stamped steel floor base. Used by many closet door manufacturers. The guides extend 5/8 in from the floor.
|
Johnson Hardware Wheel Offset Hanger Set, Nylon/Steel, Top Mounting, Suitable for: 2200, 2200F and 2222 Series Bypassing Hardware Models, Includes: (2) 3/8 in Offset Single Wheel Sliding Door Hangers
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits wardrobe doors in top-hung side-mounting applications. Offset adjustable steel bracket with 1/4 in W round edge nylon ball bearing wheel. For 3/4 to 1-3/8 in thick doors. Includes 2 #6 x 5/8 in and 1 #4 x 3/4 in Phillips pan head screws.
|
Plated steel, includes two brass nails for installation.
|
Schlage Ives Oval Pull, 1-5/16 in W, 14/32 in D, 3-9/16 in H, Flush Mounting, Brass, Oil-Rubbed Bronze
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Schlage Ives Oval Pull, 1-5/16 in W, 14/32 in D, 3-9/16 in H, Flush Mounting, Brass, Satin Nickel
|
Fits wardrobe doors in top-hung side-mounting applications. Offset adjustable steel bracket with 1/4 in W round edge nylon ball bearing wheel. For 3/4 to 1-3/8 in thick doors. Includes 2 #6 x 5/8 in and 1 #4 x 3/4 in Phillips pan head screws.
|
Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits Cox wardrobe doors in top-hung side-mounting applications. Offset adjustable steel bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick doors. Includes 3 #8 x 3/4 in Phillips pan head screws.
|
Top hung; offset adjustable bracket. Round edge nylon wheel. Fits 3/4 to 1-3/8 in thick doors; fits on Harvey. Contents: 1 roller assembly, 4 #8 x 1-1/4 in Phillips pan head sheet metal screws.
|
Nylon wheels require no lubrication. For 3/4 to 1-3/8 in thick doors. Cam-action dial permits fingertip adjustments in aligning door to jamb.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Nylon wheels require no lubrication. For 3/4 to 1-3/8 in thick doors. Cam-action dial permits fingertip adjustments in aligning door to jamb.
|
National Hardware By-Passing Door Hardware, Door Thickness: 3/4 to 1-3/8 in, Nylon/Steel, Galvanized, Dimensions: 48 in L
|
National Hardware By-Passing Door Hardware, Door Thickness: 3/4 to 1-3/8 in, Nylon/Steel, Galvanized, Dimensions: 48 in L, Includes: 770 Rail, 192 Adjustable By-Passing Door Guide, 790/791 Dial Action Hangers and Screws
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware Bypassing Door Hardware, Door Thickness: 3/4 to 1-3/8 in, Nylon/Steel, Galvanized, Dimensions: 60 in L
|
Aluminum J-track and hanger hardware for hanging to panels for a bypass configuration.
|
Fits wardrobe doors. Tandem, top mounting nylon wheels with adjustable steel bracket. Fits 3/4 to 1-3/4 in thick doors, fits on Acme.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Doors cannot accidentally jump the track. Wheels never need lubrication. Doors can be hung or removed without detaching hangers. Door guide provides smooth operation and allows up or down adjustment of doors. Dial-action hanger allows easy vertical adjustment. Safe working load: 60 lb.
|
National Hardware By-Passing Door Hardware, Door Thickness: 3/4 to 1-3/8 in, Nylon/Steel, Galvanized, Dimensions: 72 in L, Includes: 770 Rail, 192 Adjustable By-Passing Door Guide, 790/791 Dial Action Hangers and Screws
|
Aluminum J-track and hanger hardware for hanging to panels for a bypass configuration.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Schlage Ives Rectangular Pull, 1-5/16 in W, 15/32 in D, 3-1/8 in H, Flush Mounting, Brass, Oil-Rubbed Bronze
|
Schlage Ives Rectangular Pull, 1-5/16 in W, 15/32 in D, 3-1/8 in H, Flush Mounting, Brass, Satin Nickel
|
RENIN Hardware and J-Track Set, 4-Door, 48 in Track Length, Maximum Weight per Door: 50 lb, Aluminum, Suitable for: Bypass Door
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware By-Passing Door Hardware, Door Thickness: 3/4 to 1-3/8 in, Nylon/Steel, Galvanized, Dimensions: 72 in L
|
Aluminum J-track and hanger hardware for hanging to panels for a bypass configuration.
|
RENIN Hardware and J-Track Set, 2-Door, 60 in Track Length, Maximum Weight per Door: 50 lb, Aluminum, Suitable for: Bypass Door
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.
|
Plated steel, includes two brass nails for installation.
|
RENIN Hardware and J-Track Set, 2-Door, 72 in Track Length, Maximum Weight per Door: 50 lb, Aluminum, Suitable for: Bypass Door
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RENIN Hardware and J-Track Set, 2-Door, 96 in Track Length, Maximum Weight per Door: 50 lb, Aluminum, Suitable for: Bypass Door
|
Plated steel, includes two brass nails for installation.
|
RENIN Hardware and Track Set, 2-Door, 48 in Track Length, Maximum Weight per Door: 200 lb, Aluminum, Suitable for: Bypass Door
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RENIN Hardware and Track Set, 2-Door, 60 in Track Length, Maximum Weight per Door: 200 lb, Aluminum, Suitable for: Bypass Door
|
RENIN Hardware and Track Set, 2-Door, 72 in Track Length, Maximum Weight per Door: 200 lb, Aluminum, Suitable for: Bypass Door
|
Precision extruded aluminum bypass track features intergraded fascia that hide hangers from view. Line-design fascia hides finger marks and scratches, can hold paint or be covered with matching millwork if desired. 3-wheel hangers with 1 in Dia wheels ride smoothly and quietly on convex shaped rails with single point contact. Hangers feature a quick disconnect clip system facilitating easy mounting or dismounting of door panels.
|
|
|
|
|
|
|
|
|
|
|
|
|
RENIN Hardware and Track Set, 4-Door, 96 in Track Length, Maximum Weight per Door: 200 lb, Aluminum, Suitable for: Bypass Door
|
|
|
