Home > POWER TOOLS & ACC > POWER TOOL ACCESSORIES > POWER CUTTING ACCESSORIES > ROUTER BITS 1/2 IN CARBIDE
Sort By:
Page of 1
Freud 12-118 Router Bit Freud 12-116 Router Bit BIT ROUTER PILOT PANEL 3/8X1IN
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers. Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers. Bosch carbide-tipped router bits deliver precision and durability. They feature premium-quality micro grain carbide tips that are engineered with a special heat treating process for an extra-fine finish. The tips provide maximum sharpness and edge retention. The fully hardened and tempered steel shanks provide ultimate durability. These bits retain painstaking accuracy across hundreds of profiles for mortising, edge forming, trimming, surface forming and cabinetry/joinery in wood, plastic and laminate.
Freud 12-110 Router Bit Freud 50-104 Flush Trim Router Bit Freud 12-100 Router Bit
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers. Top mounted bearings on bits make them ideal for lettering or other template work where the work piece is being grooved or routed out. Cuts all composition materials, plywood, hardwood and soft wood. Use on portable or table mounted routers for template work. Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
Freud 12-136 Router Bit Freud 42-114 Flush Trim Router Bit Freud 12-122 Router Bit
Cuts all composition materials, plywood, hardwood and soft wood.  Use on CNC and other automatic routers as well as hand held and table mounted portable routers. These are the bits to rely on for a smooth, burn-free cut. Two flutes provide faster cutting and three flutes yield a excellent finish. Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
BIT ROUTER STRGT 3/4X1-1/4IN STRAIGHT BIT DBL FLUTE 1/2X2IN BEARING FLUSH TRIM RTR BIT 3/4
Bosch carbide-tipped router bits deliver precision and durability. They feature premium-quality micro grain carbide tips that are engineered with a special heat treating process for an extra-fine finish. The tips provide maximum sharpness and edge retention. The fully hardened and tempered steel shanks provide ultimate durability. These bits retain painstaking accuracy across hundreds of profiles for mortising, edge forming, trimming, surface forming and cabinetry/joinery in wood, plastic and laminate. Freud's huge selection of carbide tipped and solid carbide double flute straight bits are ideal for grooving, edge routing and other general-purpose routing tasks. Tips are relieved to allow for efficient plunge cuts. Freud's flush trim bit range includes bits for any trimming application. Use these bits for precise trim work on laminate counter tops, to follow patterns to create or duplicate intricate shapes or for any task requiring a clean cut-off along a flush edge with a smooth, burn-free cut. Use on hardwood, softwood, plywood, composites and laminates on handheld or table-mounted routers. Two flute bits provide faster cutting and three flutes yield a superior finish.
BIT ROUTER STRGT 1/2X2-1/2IN Freud 12-156 Router Bit Freud 12-172 Router Bit
Bosch carbide-tipped router bits deliver precision and durability. They feature premium-quality micro grain carbide tips that are engineered with a special heat treating process for an extra-fine finish. The tips provide maximum sharpness and edge retention. The fully hardened and tempered steel shanks provide ultimate durability. These bits retain painstaking accuracy across hundreds of profiles for mortising, edge forming, trimming, surface forming and cabinetry/joinery in wood, plastic and laminate. Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers. Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
Freud 26-104 Router Bit Freud 28-104 Router Bit Freud 12-150 Router Bit
Drill through point allows self starting, while the pilot will act as a guide for template work. Cuts all composition materials, plywood, hardwood and softwood. Use on portable routers for template work. Drill through point allows self starting, while the pilot will act as a guide for template work. Cuts all composition materials, plywood, hardwood and softwood. Use on portable routers for template work. Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
Freud 12-130 Router Bit Freud 32-102 Rabbeting Router Bit Freud 42-116 Flush Trim Router Bit
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers. Freud Router Bit, 1-1/4 in Diameter Cutter, 2 -Cutter, 1/2 in Cutting Depth, 1/2 in Shank Diameter, Carbide, 2-1/4 in Overall Length, Applicable Materials: Hardwood, Plywood, Softwood, Suitable for: Handheld and Table-Mounted Portable Routers These are the bits to rely on for a smooth, burn-free cut. Two flutes provide faster cutting and three flutes yield a excellent finish.
Freud 42-110 Flush Trim Router Bit STRAIGHT ROUTER BIT 2F 3/4IN Freud 34-120 Round over Router Bit
FLUSH TRIM ROUTER BIT
Our Price: $37.99
Bits can do more than just trim laminate, can be used for pattern work. Cuts all composition materials, laminates, plywood, hard wood and soft wood. Use on portable or table mounted routers. 3/8" bearing. Ground carbide with titanium for long life. Anti-kickback. Freud Double-Flute Straight Bit, 3/4 in Diameter Cutter, 2 -Cutter, 2 in Cutting Depth, 1/2 in Shank Diameter, Carbide, Red, 3-1/2 in Overall Length, Applicable Materials: Wood Bits are often used to soften the edge of furniture. Shear angle provides the smoothest cut available. Cuts all composition materials, plywood, hardwood and softwood. Use on handheld and table-mounted portable routers. 1/2 in bearing Dia.
Bosch 85441MC Laminate Flush Trim Router Bit Freud 44-100 Flush Trim Router Bit TRDNL BEADING ROUTER BIT 1/8IN
FLUSH TRIM ROUTER BIT
Our Price: $39.99
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Flush trim bits are used for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the work piece. Double flute trim bit allows for a smoother finish. The fully hardened and tempered steel shank provides ultimate durability. Bits can do more than just trim laminate, can be used for pattern work. Cuts all composition materials, laminates, plywood, hard wood and soft wood. Use on portable or table mounted routers. 3/8" bearing. Ground carbide with titanium for long life. Anti-kickback. Traditional beading bits are a great solution when a project requires matching moldings in historic homes. The bit forms a single bead with a square shoulder, which is frequently used by renovators to match base moldings in historic homes. Use with hand-held or table-mounted routers to cut hardwood, softwood, plywood or composites. Also a good choice for furniture reproduction.
Freud 40-114 Chamfer Router Bit Freud 34-124 Round over Router Bit TRDNL BEADING ROUTER BIT 3/16
Creates a uniform chamfer on the edge of any workpiece to add character, while retaining crisp geometric lines. Bits are often used to soften the edge of furniture. Shear angle provides the smoothest cut available. Cuts all composition materials, plywood, hardwood and softwood. Use on handheld and table-mounted portable routers. 1/2 in bearing Dia. Traditional beading bits are a great solution when a project requires matching moldings in historic homes. The bit forms a single bead with a square shoulder, which is frequently used by renovators to match base moldings in historic homes. Use with handheld or table-mounted routers to cut hardwood, softwood, plywood or composites. Also a good choice for furniture reproduction.
Freud 44-108 Flush Trim Router Bit COVE ROUTER BIT 2-CUTTER 1/2IN BIT ROUTER BULLNS 19/32X1/2IN
Bits can do more than just trim laminate, can be used for pattern work. Cuts all composition materials, laminates, plywood, hard wood and soft wood. Use on portable or table mounted routers. 3/8 in bearing. Ground carbide with titanium for long life. Anti-kickback. Freud's big selection of carbide-tipped cove bits rout clean, smooth edges that are perfect for almost any woodworking project. Also called a core box bit, these tools create a classic shape that is popular on many edge applications. Freud bits feature a shear angle that slices wood similar to the way a craftsman uses a hand plane, reducing the chance of tearing or splintering in materials with figured grain. Use in handheld or table-mounted routers to rout hard or soft wood, plywood or composites. Bosch carbide-tipped router bits deliver precision and durability. They feature premium-quality micro grain carbide tips that are engineered with a special heat treating process for an extra-fine finish. The tips provide maximum sharpness and edge retention. The fully hardened and tempered steel shanks provide ultimate durability. These bits retain painstaking accuracy across hundreds of profiles for mortising, edge forming, trimming, surface forming and cabinetry/joinery in wood, plastic and laminate.
ROMAN OGEE ROUTER BIT 1-5/16IN Freud 38-106 Roman Ogee Router Bit Freud 99-240 Router Bit
Freud offers a huge selection of decorative edge bits, most featuring our patented quadra-cut design for an extra-fine finish. Choose the profile you need to add distinctive design to cabinets, furniture, plaques and millwork with these decorative edging bits. Ideal for routing hardwood, softwood, plywood or composites using hand-held or table-mounted routers. Profile can be changed by changing the height of bit. Cuts all composition materials, plywood, hardwood and softwood. Use on handheld and table-mounted portable routers. 3/8 in bearing Dia. Forms a strong joint between the sides and front of a drawer. Drawer fronts are formed horizontally, flat on table surface. Drawer sides are formed vertically against the fence of the table. Cuts all composite materials, plywood, hardwood and softwood.
Freud 50-509 Flush Trim Router Bit Freud 34-126 Round over Router Bit COVE&BEAD ROUTER BIT 4C 1-9/16
Designed to produce precision cuts in almost any trimming or pattern routing application with bearings above and below the cutting edge. Bits are often used to soften the edge of furniture. Shear angle provides the smoothest cut available. Cuts all composition materials, plywood, hardwood and softwood. Use on handheld and table-mounted portable routers. 1/2 in bearing Dia. Freud offers a huge selection of decorative edge bits, most featuring our patented quadra-cut design for an extra fine finish. Choose the profile you need to add distinctive design to cabinets, furniture, plaques and millwork with these decorative edging bits. Ideal for routing hardwood, softwood, plywood or composites using handheld or table-mounted routers.
Freud 34-127 Round over Router Bit Freud 75-106 Router Bit CLSC C&R ROUTER BIT 4C 1-3/8IN
Bits are often used to soften the edge of furniture. Shear angle provides the smoothest cut available. Cuts all composition materials, plywood, hardwood and softwood. Use on handheld and table-mounted portable routers. 1/2 in bearing Dia. Up spiral bits combine effective chip removal with a cut that can't be matched by standard straight bits. Computer designed flutes provide the chip removal required in production settings. Suited for cutting mortices or routing deep blind holes. Excellent for grooves and dados in all composition materials, plywood, hard wood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers. Freud offers a huge selection of decorative edge bits, most featuring our patented Quadra-Cut design for an extra fine finish. Choose the profile you need to add distinctive design to cabinets, furniture, plaques and millwork with these decorative edging bits. Ideal for routing hardwood, softwood, plywood or composites using hand held or table-mounted routers.
Bosch 84624MC Tongue Groove Router Bit BIT ROUTER RNDOVER 3/4X1IN Freud 32-524 Multi-Rabbeting Router Bit Set
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Tongue and groove bit cuts ideally fitted tongue-and-groove joints. The fully-hardened and tempered steel shank provides ultimate durability. Bosch carbide-tipped router bits deliver precision and durability. They feature premium-quality micro grain carbide tips that are engineered with a special heat treating process for an extra-fine finish. The tips provide maximum sharpness and edge retention. The fully hardened and tempered steel shanks provide ultimate durability. These bits retain painstaking accuracy across hundreds of profiles for mortising, edge forming, trimming, surface forming and cabinetry/joinery in wood, plastic and laminate. With interchangeable bearings to cut rabbets of different depths, these sets produce super-smooth cuts on both surfaces of the rabbet.
Freud 99-063 Router Bit ROUND NOSE ROUTER BIT 2C 1/2IN HALF ROUND BIT W/BEARING 1/4IN
Routes graceful inverted ogee profile on the face of the door, with a ball bearing guide to follow edge of straight or curved surfaces. Round nose bits add a beautiful engraved detail to cabinet doors, drawer fronts and fluted millwork and they are also a great choice for routing sign lettering. Sometimes called core box bits, these tools can be used in CNC, hand-held or table-mounted routers to cut hardwood, softwood, plywood and composites. Ideal for furniture, stair treads or half round mouldings, these bits produce a fully semicircular edge on dimensional lumber or an attractive profile on furniture and mouldings. Comes with ball bearing guide for template work or to held align your router table fence. Use with a template, router table fence or router edge guide. Cuts hardwood, softwood, plywood or composites.
Freud 34-128 Round over Router Bit Freud 75-108 Router Bit Freud 99-031 Reversible Glue Joint Router Bit
Bits are often used to soften the edge of furniture. Shear angle provides the smoothest cut available. Cuts all composition materials, plywood, hardwood and softwood. Use on handheld and table-mounted portable routers. 1/2 in bearing Dia. Up spiral bits combine effective chip removal with a cut that can't be matched by standard straight bits. Computer designed flutes provide the chip removal required in production settings. Suited for cutting mortices or routing deep blind holes. Excellent for grooves and dados in all composition materials, plywood, hard wood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers. Provides a stronger joint by increasing the surface area for glue. Plane boards to a uniform thickness, align bit to the center of the board, then reverse each board for the glue joint. Cuts all composition materials, plywood, hardwood and softwood. Use on CNC and other automatic routers as well as table mounted portable routers.
Freud 99-035 Router Bit Quadra-Cut 99-513 Router Bit Freud 99-036 Tongue and Groove Router Bit Set
Produces locking miter joints. Run one board vertically and run the piece to be joined horizontally. Cuts all composition materials, plywood, hardwood and softwood. Use on CNC and other automatic routers as well as table mounted portable routers. Design combines two small wings that cut downward to shear the top edge for a splinter-free surface and two large wings that shear upward for a smooth finish. Produces raised panels for doors and paneling. Use 1/2 in H for 5/8 in stock. Use 5/8 in height for 3/4 in stock. Cuts all composite materials, plywood, hardwood and soft wood. Use on table mounted portable routers. Produces perfectly fitted tongue and groove joints. Opposing shear angles of the tongue cutter ensures flawless finish. Adjustable for stock thickness of 1/2 in to 1-1/4 in and groove widths of 7/32 in to 3/8 in. Cut all composition materials, plywood, hardwood and softwood. Use on table mounted portable routers.
Quadra-Cut 99-520 Router Bit Freud 99-034 Router Bit ROUNDING OVR ROUTER BIT 4C 1IN
Revolutionary Quadra-Cut? design combines two small wings that cut downward to shear the top edge for a splinter-free surface and two large wings that shear upward for a smooth finish. Produces locking miter joints. Run one board vertically and run the piece to be joined horizontally. Cuts all composition materials, plywood, hardwood and softwood. Use on CNC and other automatic routers as well as table mounted portable routers. Freud rounding over bits have so many uses that they are indispensable in any shop. Use them to make moldings, doors and drawers, soften sharp edges of parts and so many other tasks. Most of these bits also feature Freud's unique quadra-cut design for flawless finish in cross-grain applications. To get more use from your bits, equip the bits with a bearing that is 1/8 in smaller in diameter to create a beading profile. Use them in CNC, hand-held and table mounted routers to cut hardwood, softwood, plywood and composites.
Quadra-Cut 99-566 Router Bit with Back Cutters Quadra-Cut 99-569 Router Bit with Back Cutters Freud 99-037 Finger Joint Router Bit
Raised panel bits with back cutter to produce panels from 3/4 in stock that are flush with the door frame for a professional look. Finished doors can be sanded with a wide belt sander or drum sander for easiest finishing. Shims are included to allow adjustments of the tongue thickness from 7/32 to 1/4 in. Cuts all composition materials, plywood, hardwood and soft wood. Use on table mounted portable routers. Raised panel bits with back cutter to produce panels from 3/4 in stock that are flush with the door frame for a professional look. Finished doors can be sanded with a wide belt sander or drum sander for easiest finishing. Shims are included to allow adjustments of the tongue thickness from 7/32 to 1/4 in. Cuts all composition materials, plywood, hardwood and soft wood. Use on table mounted portable routers. For joining wood edge to edge or end to end. Produces a joint that is stronger than the wood itself. Tips on each side of the bit are offset, cutting twice as many fingers as you see tips on each side of the bit. Use on CNC and other automatic router as well as table mounted portable routers.
STACKED SLOTTING SET 2X3-1/4IN
Here is a versatile solution to almost any slotting requirement. By changing the number of cutters used, the set will cut grooves from 1/8 in to 23/32 in wide. By changing the bearings, this set will cut three different depths (1/4 in, 3/8 in, 1/2 in). Includes arbor, 3 bearings and 4 cutters. Use on hand held and table-mounted routers.