|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Irwin Speedbor? MAX SPEED? wood drilling bit is the fastest SPEEDBOR? ever. The speed tip features a full screw point that allows bit to self-feed, as well as three cutting spurs for faster, cleaner holes, less breakout and extended drilling life. The tapered tri-flute design allows for faster chip ejection and less binding. Its grooved hex shank prevents slipping and fits all standard 1/4 in quick-change chucks, including impact drills.
|
The Irwin Speedbor? MAX SPEED? wood drilling bit is the fastest SPEEDBOR? ever. The speed tip features a full screw point that allows bit to self-feed, as well as three cutting spurs for faster, cleaner holes, less breakout and extended drilling life. The tapered tri-flute design allows for faster chip ejection and less binding. Its grooved hex shank prevents slipping and fits all standard 1/4 in quick-change chucks, including impact drills.
|
Hexagonal shanks for sure grip in the chuck. Sharp cutting lip and a wide single spiral flute gives ample clearance for chip flow. Center screw point starts hole and helps pull bits through material.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Irwin Speedbor? MAX SPEED? wood drilling bit is the fastest SPEEDBOR? ever. The speed tip features a full screw point that allows bit to self-feed, as well as three cutting spurs for faster, cleaner holes, less breakout and extended drilling life. The tapered tri-flute design allows for faster chip ejection and less binding. Its grooved hex shank prevents slipping and fits all standard 1/4 in quick-change chucks, including impact drills.
|
The Irwin Speedbor? MAX SPEED? wood drilling bit is the fastest SPEEDBOR? ever. The speed tip features a full screw point that allows bit to self-feed, as well as three cutting spurs for faster, cleaner holes, less breakout and extended drilling life. The tapered tri-flute design allows for faster chip ejection and less binding. Its grooved hex shank prevents slipping and fits all standard 1/4 in quick-change chucks, including impact drills.
|
The Irwin Speedbor? MAX SPEED? wood drilling bit is the fastest SPEEDBOR? ever. The speed tip features a full screw point that allows bit to self-feed, as well as three cutting spurs for faster, cleaner holes, less breakout and extended drilling life. The tapered tri-flute design allows for faster chip ejection and less binding. Its grooved hex shank prevents slipping and fits all standard 1/4 in quick-change chucks, including impact drills.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Irwin Speedbor? MAX SPEED? wood drilling bit is the fastest SPEEDBOR? ever. The speed tip features a full screw point that allows bit to self-feed, as well as three cutting spurs for faster, cleaner holes, less breakout and extended drilling life. The tapered tri-flute design allows for faster chip ejection and less binding. Its grooved hex shank prevents slipping and fits all standard 1/4 in quick-change chucks, including impact drills.
|
Hexagonal shanks for sure grip in the chuck. Sharp cutting lip and a wide single spiral flute gives ample clearance for chip flow. Center screw point starts hole and helps pull bits through material.
|
The Irwin Speedbor? MAX SPEED? wood drilling bit is the fastest SPEEDBOR? ever. The speed tip features a full screw point that allows bit to self-feed, as well as three cutting spurs for faster, cleaner holes, less breakout and extended drilling life. The tapered tri-flute design allows for faster chip ejection and less binding. Its grooved hex shank prevents slipping and fits all standard 1/4 in quick-change chucks, including impact drills.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Irwin Speedbor? MAX SPEED? wood drilling bit is the fastest SPEEDBOR? ever. The speed tip features a full screw point that allows bit to self-feed, as well as three cutting spurs for faster, cleaner holes, less breakout and extended drilling life. The tapered tri-flute design allows for faster chip ejection and less binding. Its grooved hex shank prevents slipping and fits all standard 1/4 in quick-change chucks, including impact drills.
|
Milwaukee 1/2 x 6 in SPEED FEED? wood bits let you drill up to 10X faster than flat boring bits. These self-feeding wood bits feature double-wing spurs for drilling fast holes in clean wood. The feed screw and dual cutting edges permit fast cutting of clean holes that are ideal for feeding wire or bolts.
|
The Irwin Speedbor? MAX SPEED? wood drilling bit is the fastest SPEEDBOR? ever. The speed tip features a full screw point that allows bit to self-feed, as well as three cutting spurs for faster, cleaner holes, less breakout and extended drilling life. The tapered tri-flute design allows for faster chip ejection and less binding. Its grooved hex shank prevents slipping and fits all standard 1/4 in quick-change chucks, including impact drills.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Irwin Speedbor? MAX SPEED? wood drilling bit is the fastest SPEEDBOR? ever. The speed tip features a full screw point that allows bit to self-feed, as well as three cutting spurs for faster, cleaner holes, less breakout and extended drilling life. The tapered tri-flute design allows for faster chip ejection and less binding. Its grooved hex shank prevents slipping and fits all standard 1/4 in quick-change chucks, including impact drills.
|
Hexagonal shanks for sure grip in the chuck. Sharp cutting lip and a wide single spiral flute gives ample clearance for chip flow. Center screw point starts hole and helps pull bits through material.
|
The Irwin Speedbor? MAX SPEED? wood drilling bit is the fastest SPEEDBOR? ever. The speed tip features a full screw point that allows bit to self-feed, as well as three cutting spurs for faster, cleaner holes, less breakout and extended drilling life. The tapered tri-flute design allows for faster chip ejection and less binding. Its grooved hex shank prevents slipping and fits all standard 1/4 in quick-change chucks, including impact drills.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.
|
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.
|
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.
|
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.
|
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.
|
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.
|
Hexagonal shanks for sure grip in the chuck. Sharp cutting lip and a wide single spiral flute gives ample clearance for chip flow. Center screw point starts hole and helps pull bits through material.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Milwaukee 5/8 x 6 in SPEED FEED? wood bits let you drill up to 10X faster than flat boring bits. These self-feeding wood bits feature double-wing spurs for drilling fast holes in clean wood. The feed screw and dual cutting edges permit fast cutting of clean holes that are ideal for feeding wire or bolts.
|
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.
|
Milwaukee 3/4 x 6 in SPEED FEED? wood bits let you drill up to 10X faster than flat boring bits. These self-feeding wood bits feature double-wing spurs for drilling fast holes in clean wood. The feed screw and dual cutting edges permit fast cutting of clean holes that are ideal for feeding wire or bolts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.
|
The Irwin Speedbor? MAX SPEED? wood drilling bit is the fastest SPEEDBOR? ever. The speed tip features a full screw point that allows bit to self-feed, as well as three cutting spurs for faster, cleaner holes, less breakout and extended drilling life. The tapered tri-flute design allows for faster chip ejection and less binding. Its grooved hex shank prevents slipping and fits all standard 1/4 in quick-change chucks, including impact drills.
|
Diablo 2-Step Auger Drill Bit, 1/4 in Diameter, Deep Flute, Self-Feed Point, 7-1/2 in Overall Length, Applicable Materials: Wood, Suitable for: Cordless and Corded Impact and Drill Drivers
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hexagonal shanks for sure grip in the chuck. Sharp cutting lip and a wide single spiral flute gives ample clearance for chip flow. Center screw point starts hole and helps pull bits through material.
|
Milwaukee 7/8 x 6 in SPEED FEED? wood bits let you drill up to 10X faster than flat boring bits. These self-feeding wood bits feature double-wing spurs for drilling fast holes in clean wood. The feed screw and dual cutting edges permit fast cutting of clean holes that are ideal for feeding wire or bolts.
|
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.
|
Diablo 2-Step Auger Drill Bit, 5/16 in Diameter, Deep Flute, Self-Feed Point, 7-1/2 in Overall Length, Applicable Materials: Wood, Suitable for: Cordless and Corded Impact and Drill Drivers
|
The Irwin Speedbor? MAX SPEED? wood drilling bit is the fastest SPEEDBOR? ever. The speed tip features a full screw point that allows bit to self-feed, as well as three cutting spurs for faster, cleaner holes, less breakout and extended drilling life. The tapered tri-flute design allows for faster chip ejection and less binding. Its grooved hex shank prevents slipping and fits all standard 1/4 in quick-change chucks, including impact drills.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Irwin Speedbor? MAX SPEED? wood drilling bit is the fastest SPEEDBOR? ever. The speed tip features a full screw point that allows bit to self-feed, as well as three cutting spurs for faster, cleaner holes, less breakout and extended drilling life. The tapered tri-flute design allows for faster chip ejection and less binding. Its grooved hex shank prevents slipping and fits all standard 1/4 in quick-change chucks, including impact drills.
|
Milwaukee 1 x 6 in SPEED FEED? wood bits let you drill up to 10X faster than flat boring bits. These self-feeding wood bits feature double-wing spurs for drilling fast holes in clean wood. The feed screw and dual cutting edges permit fast cutting of clean holes that are ideal for feeding wire or bolts.
|
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Diablo 2-Step Auger Drill Bit, 3/8 in Diameter, Deep Flute, Self-Feed Point, 7-1/2 in Overall Length, Applicable Materials: Wood, Suitable for: Cordless and Corded Impact and Drill Drivers
|
Tri-Flute design for faster chip ejection cutting spurs have 3 cutting edges for added durability. Full screw tip allows bit to self-feed. Grooved hex shank prevents slipping in drill chuck. Fits all standard 1/4 in quick change chucks. Includes (1) each 5/8 in, 3/4 in, 1 in and case.
|
Diablo 2-Step Auger Drill Bit, 7/16 in Diameter, Deep Flute, Self-Feed Point, 7-1/2 in Overall Length, Applicable Materials: Wood, Suitable for: Cordless and Corded Impact and Drill Drivers
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Milwaukee 1-1/4 x 6 in SPEED FEED? wood bits let you drill up to 10X faster than flat boring bits. These self-feeding wood bits feature double-wing spurs for drilling fast holes in clean wood. The feed screw and dual cutting edges permit fast cutting of clean holes that are ideal for feeding wire or bolts.
|
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.
|
Diablo 2-Step Auger Drill Bit, 1/2 in Diameter, Deep Flute, Hex Shank, 10 mm Shank Diameter, Self-Feed Point, Carbide Cutting Edge, 7-1/2 in Overall Length, Applicable Materials: Concrete, Wood, Suitable for: Cordless and Corded Impact and Drill Drivers
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Diablo 2-Step Auger Drill Bit, 9/16 in Diameter, Deep Flute, Self-Feed Point, 7-1/2 in Overall Length, Applicable Materials: Wood, Suitable for: Cordless and Corded Impact and Drill Drivers
|
Equipped with a self-feed spur for fast material penetration, DeWALT? short power ship auger bits feature a dual cutting edge for maximum durability in nails. A hollow center flute delivers aggressive chip extraction and 7/16 in ball groove shank enables quick bit changes. Heat-treated and tempered for extreme durability and long life.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Diablo 2-Step Auger Drill Bit, 5/8 in Diameter, Deep Flute, Hex Shank, 10 mm Shank Diameter, Self-Feed Point, Carbide Cutting Edge, 7-1/2 in Overall Length, Applicable Materials: Concrete, Wood, Suitable for: Cordless and Corded Impact and Drill Drivers
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Diablo 2-Step Auger Drill Bit, 11/16 in Diameter, Deep Flute, Self-Feed Point, 7-1/2 in Overall Length, Suitable for: Cordless and Corded Impact and Drill Drivers
|
Diablo 2-Step Auger Drill Bit, 3/4 in Diameter, Deep Flute, Hex Shank, 10 mm Shank Diameter, Self-Feed Point, Carbide Cutting Edge, 7-1/2 in Overall Length, Applicable Materials: Concrete, Wood, Suitable for: Cordless and Corded Impact and Drill Drivers
|
Diablo 2-Step Auger Drill Bit, 13/16 in Diameter, Deep Flute, Self-Feed Point, 7-1/2 in Overall Length, Applicable Materials: Wood, Suitable for: Cordless and Corded Impact and Drill Drivers
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Diablo 2-Step Auger Drill Bit, 7/8 in Diameter, Deep Flute, Hex Shank, 10 mm Shank Diameter, Self-Feed Point, Carbide Cutting Edge, 7-1/2 in Overall Length, Applicable Materials: Concrete, Wood, Suitable for: Cordless and Corded Impact and Drill Drivers
|
The Irwin with WeldTec? ship auger is made stronger and lasts longer than any ship auger in the world. It features a welded cutting edge that easily cuts through tough materials like nail-embedded wood. It has twice the nail cutting life of standard ship augers. With an aggressive screw-pitch for faster drilling, this bit is fully-forged for maximum durability and wide flutes provide maximum chip removal with less binding.
|
The Irwin with WeldTec? ship auger is made stronger and lasts longer than any ship auger in the world. It features a welded cutting edge that easily cuts through tough materials like nail-embedded wood. It has twice the nail cutting life of standard ship augers. With an aggressive screw-pitch for faster drilling, this bit is fully-forged for maximum durability and wide flutes provide maximum chip removal with less binding.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Irwin with WeldTec? ship auger is made stronger and lasts longer than any ship auger in the world. It features a welded cutting edge that easily cuts through tough materials like nail-embedded wood. It has twice the nail cutting life of standard ship augers. With an aggressive screw-pitch for faster drilling, this bit is fully-forged for maximum durability and wide flutes provide maximum chip removal with less binding.
|
Diablo 2-Step Auger Drill Bit, 15/16 in Diameter, Deep Flute, Self-Feed Point, 7-1/2 in Overall Length, Applicable Materials: Wood, Suitable for: Cordless and Corded Impact and Drill Drivers
|
The Irwin with WeldTec? ship auger is made stronger and lasts longer than any ship auger in the world. It features a welded cutting edge that easily cuts through tough materials like nail-embedded wood. It has twice the nail cutting life of standard ship augers. With an aggressive screw-pitch for faster drilling, this bit is fully-forged for maximum durability and wide flutes provide maximum chip removal with less binding.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Irwin with WeldTec? ship auger is made stronger and lasts longer than any ship auger in the world. It features a welded cutting edge that easily cuts through tough materials like nail-embedded wood. It has twice the nail cutting life of standard ship augers. With an aggressive screw-pitch for faster drilling, this bit is fully-forged for maximum durability and wide flutes provide maximum chip removal with less binding.
|
Diablo 2-Step Auger Drill Bit, 1 in Diameter, Deep Flute, Self-Feed Point, 7-1/2 in Overall Length, Applicable Materials: Wood, Suitable for: Cordless and Corded Impact and Drill Drivers
|
Diablo 2-Step Auger Drill Bit, 1-1/8 in Diameter, Deep Flute, Self-Feed Point, 7-1/2 in Overall Length, Applicable Materials: Wood, Suitable for: Cordless and Corded Impact and Drill Drivers
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Diablo 2-Step Auger Drill Bit, 1-1/4 in Diameter, Deep Flute, Self-Feed Point, 7-1/2 in Overall Length, Applicable Materials: Wood, Suitable for: Cordless and Corded Impact and Drill Drivers
|
Diablo 2-Step Auger Drill Bit, 1-3/8 in Diameter, Deep Flute, Self-Feed Point, 7-1/2 in Overall Length, Applicable Materials: Wood, Suitable for: Cordless and Corded Impact and Drill Drivers
|
Diablo's Auger Bit range provides maximum performance, extreme durability and superior life in nail-embedded wood applications. A two-step cutting action creates holes that are precise and clean. The self-feeding Dura-Tip? pulls the bit while the dual cutting edge delivers an effortless, smooth drilling experience in wood with nails. Deep flutes enhance the chip evacuation process for more holes per charge. Quick change shank increases stability and durability in cordless and corded impact wrenches and drill drivers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Diablo 2-Step Auger Drill Bit, 7/16 in Diameter, Deep Flute, Self-Feed Point, 17-1/2 in Overall Length, Applicable Materials: Wood, Suitable for: Cordless and Corded Impact and Drill Drivers
|
Equipped with a self-feed spur for fast material penetration, DeWALT? short power ship auger bits feature a dual cutting edge for maximum durability in nails. A hollow center flute delivers aggressive chip extraction and 7/16 in ball groove shank enables quick bit changes. Heat-treated and tempered for extreme durability and long life.
|
The Irwin with WeldTec? ship auger is made stronger and lasts longer than any ship auger in the world. It features a welded cutting edge that easily cuts through tough materials like nail-embedded wood. It has twice the nail cutting life of standard ship augers. With an aggressive screw-pitch for faster drilling, this bit is fully-forged for maximum durability and wide flutes provide maximum chip removal with less binding.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Irwin with WeldTec? ship auger is made stronger and lasts longer than any ship auger in the world. It features a welded cutting edge that easily cuts through tough materials like nail-embedded wood. It has twice the nail cutting life of standard ship augers. With an aggressive screw-pitch for faster drilling, this bit is fully-forged for maximum durability and wide flutes provide maximum chip removal with less binding.
|
|
Milwaukee Ship Auger Bit, 1/2 in Diameter, Wide Flute, 15 in Flute Length, Hex Shank, 5/16 in Shank Diameter, HSS, 18 in Overall Length, Applicable Materials: Wood
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Diablo 2-Step Auger Drill Bit, 1-1/2 in Diameter, Deep Flute, Self-Feed Point, 7-1/2 in Overall Length, Applicable Materials: Wood, Suitable for: Cordless and Corded Impact and Drill Drivers
|
Diablo's Auger Bit range provides maximum performance, extreme durability and superior life in nail-embedded wood applications. A two-step cutting action creates holes that are precise and clean. The self-feeding Dura-Tip? pulls the bit while the dual cutting edge delivers an effortless, smooth drilling experience in wood with nails. Deep flutes enhance the chip evacuation process for more holes per charge. Quick change shank increases stability and durability in cordless and corded impact wrenches and drill drivers.
|
Diablo 2-Step Auger Drill Bit, 9/16 in Diameter, Deep Flute, Self-Feed Point, 17-1/2 in Overall Length, Applicable Materials: Wood, Suitable for: Cordless and Corded Impact and Drill Drivers
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Diablo's Auger Bit range provides maximum performance, extreme durability and superior life in nail-embedded wood applications. A two-step cutting action creates holes that are precise and clean. The self-feeding Dura-Tip? pulls the bit while the dual cutting edge delivers an effortless, smooth drilling experience in wood with nails. Deep flutes enhance the chip evacuation process for more holes per charge. Quick change shank increases stability and durability in cordless and corded impact wrenches and drill drivers.
|
Diablo 2-Step Auger Drill Bit, 11/16 in Diameter, Deep Flute, Self-Feed Point, 17-1/2 in Overall Length, Applicable Materials: Wood, Suitable for: Cordless and Corded Impact and Drill Drivers
|
Bosch Daredevil? auger bits offer leading-edge technology in wood drilling, designed for superior performance against nail hits. A unique double cutter and reamer edge provide improved hole quality. A reinforced spine delivers additional strength during aggressive drilling. Wider flutes engineered for better chip removal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Equipped with a self-feed spur for fast material penetration, DeWALT? short power ship auger bits feature a dual cutting edge for maximum durability in nails. A hollow center flute delivers aggressive chip extraction and 7/16 in ball groove shank enables quick bit changes. Heat-treated and tempered for extreme durability and long life.
|
Equipped with a self-feed spur for fast material penetration, DeWALT? short power ship auger bits feature a dual cutting edge for maximum durability in nails. A hollow center flute delivers aggressive chip extraction and 7/16 in ball groove shank enables quick bit changes. Heat-treated and tempered for extreme durability and long life.
|
The Irwin with WeldTec? ship auger is made stronger and lasts longer than any ship auger in the world. It features a welded cutting edge that easily cuts through tough materials like nail-embedded wood. It has twice the nail cutting life of standard ship augers. With an aggressive screw-pitch for faster drilling, this bit is fully-forged for maximum durability and wide flutes provide maximum chip removal with less binding.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Crafted from hardened alloy steel for long life, DeWALT? Long Power Ship Auger Bits feature a dual cutting edge for maximum durability in nails. A self-feed spur delivers expedited material penetration and hollow center flute provides aggressive chip extraction. Heat-treated and tempered for long life.
|
Crafted from hardened alloy steel for long life, DeWALT? long power ship auger bits feature a dual cutting edge for maximum durability in nails. A self-feed spur delivers expedited material penetration and hollow center flute provides aggressive chip extraction. Heat treated and tempered for long life.
|
Bosch Daredevil? Auger bits offer leading-edge technology in wood drilling, designed for great performance against nail hits. A unique double cutter and reamer edge provide improved hole quality. A reinforced spine delivers additional strength during aggressive drilling. Wider flutes engineered for better chip removal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bosch Daredevil? auger bits offer leading-edge technology in wood drilling, designed for superior performance against nail hits. A unique double cutter and reamer edge provide improved hole quality. A reinforced spine delivers additional strength during aggressive drilling. Wider flutes engineered for better chip removal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Crafted from hardened alloy steel for long life, DeWALT? Long Power Ship Auger Bits feature a dual cutting edge for maximum durability in nails. A self-feed spur delivers expedited material penetration and hollow center flute provides aggressive chip extraction. Heat-treated and tempered for long life.
|
Crafted from hardened alloy steel for long life, DeWALT? Long Power Ship Auger Bits feature a dual cutting edge for maximum durability in nails. A self-feed spur delivers expedited material penetration and hollow center flute provides aggressive chip extraction. Heat-treated and tempered for long life.
|
The Milwaukee 4-Piece x 6 in SPEED FEED? wood bit set lets you drill up to 10X faster than flat boring bits. These self-feeding wood bits feature double-wing spurs for drilling fast holes in clean wood. The feed screw and dual cutting edges permit fast cutting of clean holes that are ideal for feeding wire or bolts. The set includes 1/2 in, 5/8 in, 3/4 in and 1 in SPEED FEED? wood bits in a roll-up pouch with room for extra bits.
|
|
|
