Home > HAND TOOLS > CLAMPS / FASTENING TOOLS > WELDING SUPPLIES > WELDING ELECTRODES
Sort By:
Page of 1
ROD WELDING 1LB 3/32IN MILDSTL ROD WELDING 1LB 1/8IN MILD STL ROD WELDING AC/DC 3/32INCH 1LB
E6013 an all-position, general-purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints; smaller sizes of rod are well-suited to low heat on thin metals. Use on all types of mild steel where ease of operation and good appearance is required. Great for light gauge metal, sheet metal, duct work. AC, DCEP, DCEN recommended polarity. 83000 psi tensile strength. 50 to 70 A on sku # (890.9806). E6013 an all-position, general-purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints; smaller sizes of rod are well-suited to low heat on thin metals. Use on all types of mild steel where ease of operation and good appearance is required. Great for light gauge metal, sheet metal, duct work. AC, DCEP, DCEN recommended polarity. 83000 psi tensile strength. 50 to 70 A on sku # (890.9806). Forney? E7018 is a low hydrogen, electrode recommended for welding applications involving structural steel, construction, pressure vessels, boilers, pipes, bridges, power plants, naval and other high-strength steels where hydrogen control is imperative. This electrode displays a stable arc, smooth and finely rippled bead pattern and easy slag removal.
ROD WELDING AC/DC 1/8 INCH 1LB ROD/ELECTRD WELDING 3/32IN 1LB ROD/ELECTRD WELDING 1/8IN 1LB
Forney? E7018 is a low hydrogen, electrode recommended for welding applications involving structural steel, construction, pressure vessels, boilers, pipes, bridges, power plants, naval and other high-strength steels where hydrogen control is imperative. This electrode displays a stable arc, smooth and finely rippled bead pattern and easy slag removal. E6011 an all-position rod with strong arc force for deep penetration. Fast metal solidification facilitates welding in vertical and overhead positions. Light slag allows for easy cleanup. Excellent for rusty steel because of the strong arc force. Useful for galvanized tanks, steel casting and pressure pipe. AC, DCEP, DCEN recommended polarity. 88000 psi tensile strength. 25 to 75 A on sku #s (890.9665, 890.9673, 890.9681), 35 to 125 A on sku #s (890.9707, 890.9715, 890.9723), 50 - 160 A. E6011 an all-position rod with strong arc force for deep penetration. Fast metal solidification facilitates welding in vertical and overhead positions. Light slag allows for easy cleanup. Excellent for rusty steel because of the strong arc force. Useful for galvanized tanks, steel casting and pressure pipe. AC, DCEP, DCEN recommended polarity. 88000 psi tensile strength. 25 to 75 A on sku #s (890.9665, 890.9673, 890.9681), 35 to 125 A on sku #s (890.9707, 890.9715, 890.9723), 50 - 160 A.
ROD WELDING LOW H 3/32IN 1LB  ROD WELDING LOW H 1/8INCH 1LB ELECTRODE STEEL 1LB 1/16IN
E7018 AC mild steel welding rod easily produce quality results on smaller amperage AC/DC welders. Suitable for all positions on hardened steels where no preheat is used and on cold-rolled steels normally exhibiting excessive porosity when welded with conventional rod. The low hydrogen content reduces cracking and peeling of the weld material. Features excellent restart capability. Designed for welding low, medium and high-carbon steels as well as some higher strength low alloy steel. For frames, trailer hitches and chassis. AC, DCEN, DCEP recommended polarity. 84000 psi tensile strength. 65 to 100 A on the 10 LB rods 140-190. Individual electrode (rod) weighs 0.50 lb. E7018 AC mild steel welding rod easily produce quality results on smaller amperage AC/DC welders. Suitable for all positions on hardened steels where no preheat is used and on cold-rolled steels normally exhibiting excessive porosity when welded with conventional rod. The low hydrogen content reduces cracking and peeling of the weld material. Features excellent restart capability. Designed for welding low, medium and high-carbon steels as well as some higher strength low alloy steel. For frames, trailer hitches and chassis. AC, DCEN, DCEP recommended polarity. 84000 psi tensile strength. 65 to 100 A on the 10 LB rods 140-190. Individual electrode (rod) weighs 0.50 lb. E6013 mild steel general-purpose is an all-position, general-purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints. Smaller sizes of rod are well suited to low heat on thin metals. Use on all types of mild steel where ease of operation and good appearance is required. Great for light gauge metal, sheet metal, duct work and more.
ROD WELD GEN PURP 1LB 5/64IN  ROD WELDING MILDSTL 5LB 3/32IN ROD WELDING 5LB 1/8IN MILD STL
E6013 an all-position, general-purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints; smaller sizes of rod are well-suited to low heat on thin metals. Use on all types of mild steel where ease of operation and good appearance is required. Great for light gauge metal, sheet metal, duct work. AC, DCEP, DCEN recommended polarity. 83000 psi tensile strength. 50 to 70 A on sku # (890.9806). E6013 an all-position, general-purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints; smaller sizes of rod are well-suited to low heat on thin metals. Use on all types of mild steel where ease of operation and good appearance is required. Great for light gauge metal, sheet metal, duct work. AC, DCEP, DCEN recommended polarity. 83000 psi tensile strength. 50 to 70 A on sku # (890.9806). E6013 an all-position, general-purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints; smaller sizes of rod are well-suited to low heat on thin metals. Use on all types of mild steel where ease of operation and good appearance is required. Great for light gauge metal, sheet metal, duct work. AC, DCEP, DCEN recommended polarity. 83000 psi tensile strength. 50 to 70 A on sku # (890.9806).
ROD BRAZING BRZ FLUX 3/32X18IN ELCTRD F/AC WLDR 5LB          ROD WELDING LOW H 1/8INCH 5LB
Formulated for high tensile strength and ductility. Smooth flowing. Excellent for most brazing uses. Flux-coated for excellent cleaning action. Yellow color-coded. Tensile strength of 65000 psi. Melting point of 1598 deg F (870 deg C). E7018 AC mild steel welding rod easily produce quality results on smaller amperage AC/DC welders. Suitable for all positions on hardened steels where no preheat is used and on cold-rolled steels normally exhibiting excessive porosity when welded with conventional rod. The low hydrogen content reduces cracking and peeling of the weld material. Features excellent restart capability. Designed for welding low, medium and high-carbon steels as well as some higher strength low alloy steel. For frames, trailer hitches and chassis. AC, DCEN, DCEP recommended polarity. 84000 psi tensile strength. 65 to 100 A on the 10 LB rods 140-190. Individual electrode (rod) weighs 0.50 lb. E7018 AC mild steel welding rod easily produce quality results on smaller amperage AC/DC welders. Suitable for all positions on hardened steels where no preheat is used and on cold-rolled steels normally exhibiting excessive porosity when welded with conventional rod. The low hydrogen content reduces cracking and peeling of the weld material. Features excellent restart capability. Designed for welding low, medium and high-carbon steels as well as some higher strength low alloy steel. For frames, trailer hitches and chassis. AC, DCEN, DCEP recommended polarity. 84000 psi tensile strength. 65 to 100 A on the 10 LB rods 140-190. Individual electrode (rod) weighs 0.50 lb.
ROD/ELECTRD WELDING 5LB 3/32IN ROD/ELECTRD WELDING 1/8IN 5LB ROD/ELECTRD WELDING 5/32IN 5LB
E6011 an all-position rod with strong arc force for deep penetration. Fast metal solidification facilitates welding in vertical and overhead positions. Light slag allows for easy cleanup. Excellent for rusty steel because of the strong arc force. Useful for galvanized tanks, steel casting and pressure pipe. AC, DCEP, DCEN recommended polarity. 88000 psi tensile strength. 25 to 75 A on sku #s (890.9665, 890.9673, 890.9681), 35 to 125 A on sku #s (890.9707, 890.9715, 890.9723), 50 - 160 A. E6011 an all-position rod with strong arc force for deep penetration. Fast metal solidification facilitates welding in vertical and overhead positions. Light slag allows for easy cleanup. Excellent for rusty steel because of the strong arc force. Useful for galvanized tanks, steel casting and pressure pipe. AC, DCEP, DCEN recommended polarity. 88000 psi tensile strength. 25 to 75 A on sku #s (890.9665, 890.9673, 890.9681), 35 to 125 A on sku #s (890.9707, 890.9715, 890.9723), 50 - 160 A. E6011 an all-position rod with strong arc force for deep penetration. Fast metal solidification facilitates welding in vertical and overhead positions. Light slag allows for easy cleanup. Excellent for rusty steel because of the strong arc force. Useful for galvanized tanks, steel casting and pressure pipe. AC, DCEP, DCEN recommended polarity. 88000 psi tensile strength. 25 to 75 A on sku #s (890.9665, 890.9673, 890.9681), 35 to 125 A on sku #s (890.9707, 890.9715, 890.9723), 50 - 160 A.
ROD WELD MILD STL 5/32IN 5LBS ELCTRODE 3/32IN 5LB F/SM WLDRS ROD WELDING AC/DC 1/8 INCH 5LB
General-purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints. Smaller sizes of rod are well-suited to low heat on thin metals. Use on all types of mild steel. Great for light gauge metal, sheet metal, duct work. AC, DCEP, DCEN recommended polarity. 83000 psi tensile strength and 70 to 110 A. Forney? E7018 is a low hydrogen, electrode recommended for welding applications involving structural steel, construction, pressure vessels, boilers, pipes, bridges, power plants, naval and other high-strength steels where hydrogen control is imperative. This electrode displays a stable arc, smooth and finely rippled bead pattern and easy slag removal. Forney? E7018 is a low hydrogen, electrode recommended for welding applications involving structural steel, construction, pressure vessels, boilers, pipes, bridges, power plants, naval and other high-strength steels where hydrogen control is imperative. This electrode displays a stable arc, smooth and finely rippled bead pattern and easy slag removal.
ELECTRODE CAST IRON 1LB 1/8IN ROD AC LOW HYDROGEN 5/32IN 5LB ROD WELD 7018 MILD 5/32IN 5LB
Nomacast non-machinable cast iron specialty welding electrodes feature a non-conductive coating that is specially developed for welding dirty, heat-affected and oxidized cast iron. Ideally suited to cladding contaminated casting prior to joining with high-nickel alloys. Non-machinable. Typical applications include machine bases, pedestals, frames and housings where heat and machinability are not an important factor. Produce quality results on smaller amperage AC/DC welders. Low hydrogen content reduces cracking and peeling of the weld material. Features excellent restart capability. Designed for welding low, medium and high-carbon steels as well as some higher strength low alloy steel. For frames, trailer hitches and chassis. Recommended Polarities are AC, DCEN, DCEP (either polarity). 5/32 in Dia, weight 5 lb (2.26 kg), 84000 psi tensile strength, 140 to 190 A. Forney? E7018 is a low hydrogen, electrode recommended for welding applications involving structural steel, construction, pressure vessels, boilers, pipes, bridges, power plants, naval and other high-strength steels where hydrogen control is imperative. This electrode displays a stable arc, smooth and finely rippled bead pattern and easy slag removal.
ROD WELDING DC ALUM 1/8IN .5LB ROD/ELCTRD WELDING 5/32IN 10LB ELECTRODE STNLSS STL 1LB 1/8IN
E4043 DC aluminum "AluminArc" specialty welding electrodes are the highest strength alloy for arc and torch welding of low alloy aluminum. Excellent for cast, wrought and extruded aluminum in all positions. Can also be used as a torch brazing alloy. Typical applications include truck beds, loading ramps and docks, banisters, stairs, diamond plate, irrigation piping, engine blocks, transmission housings and railroad frogs. Recommended polarity is DC reverse. Weight of 0.5 lb (0.22 kg). 70 to 120 A. E6011 an all-position rod with strong arc force for deep penetration. Fast metal solidification facilitates welding in vertical and overhead positions. Light slag allows for easy cleanup. Excellent for rusty steel because of the strong arc force. Useful for galvanized tanks, steel casting and pressure pipe. AC, DCEP, DCEN recommended polarity. 88000 psi tensile strength. 25 to 75 A on sku #s (890.9665, 890.9673, 890.9681), 35 to 125 A on sku #s (890.9707, 890.9715, 890.9723), 50 - 160 A. E312-16 stainless alloy easy all steel specialty welding electrodes are the ultimate rods for most grades of steel using any stick electrode power source. Can be used by anyone, regardless of prior welding experience. Features a superior combination of tensile strength and elongation. The arc is so ionized that you cannot short it out. Typical applications include joining abrasions and heat and corrosion-resistant steels. Best suited to horizontal fillet welds.
ROD WELDING MILDSTL 10LB 1/8IN RD WLDG 1/8IN MILD STL 10LB   ROD WELDING LOW H 5/32IN 10LB
E6013 an all-position, general-purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints; smaller sizes of rod are well-suited to low heat on thin metals. Use on all types of mild steel where ease of operation and good appearance is required. Great for light gauge metal, sheet metal, duct work. AC, DCEP, DCEN recommended polarity. 83000 psi tensile strength. 50 to 70 A on sku # (890.9806). E7018 AC mild steel welding rod easily produce quality results on smaller amperage AC/DC welders. Suitable for all positions on hardened steels where no preheat is used and on cold-rolled steels normally exhibiting excessive porosity when welded with conventional rod. The low hydrogen content reduces cracking and peeling of the weld material. Features excellent restart capability. Designed for welding low, medium and high-carbon steels as well as some higher strength low alloy steel. For frames, trailer hitches and chassis. AC, DCEN, DCEP recommended polarity. 84000 psi tensile strength. 65 to 100 A on the 10 LB rods 140-190. Individual electrode (rod) weighs 0.50 lb. E7018 AC mild steel welding rod easily produce quality results on smaller amperage AC/DC welders. Suitable for all positions on hardened steels where no preheat is used and on cold-rolled steels normally exhibiting excessive porosity when welded with conventional rod. The low hydrogen content reduces cracking and peeling of the weld material. Features excellent restart capability. Designed for welding low, medium and high-carbon steels as well as some higher strength low alloy steel. For frames, trailer hitches and chassis. AC, DCEN, DCEP recommended polarity. 84000 psi tensile strength. 65 to 100 A on the 10 LB rods 140-190. Individual electrode (rod) weighs 0.50 lb.
ELCTRODE F/SM WLDRS 10LB 1/8IN RD WLDG 1/8IN MILD STL 10LB   ROD WELD MILD STL 5/32IN 10LBS
Forney? E7018 is a low hydrogen, electrode recommended for welding applications involving structural steel, construction, pressure vessels, boilers, pipes, bridges, power plants, naval and other high-strength steels where hydrogen control is imperative. This electrode displays a stable arc, smooth and finely rippled bead pattern and easy slag removal. E6011 an all-position rod with strong arc force for deep penetration. Fast metal solidification facilitates welding in vertical and overhead positions. Light slag allows for easy cleanup. Excellent for rusty steel because of the strong arc force. Useful for galvanized tanks, steel casting and pressure pipe. AC, DCEP, DCEN recommended polarity. 88000 psi tensile strength. 25 to 75 A on sku #s (890.9665, 890.9673, 890.9681), 35 to 125 A on sku #s (890.9707, 890.9715, 890.9723), 50 - 160 A. General-purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints. Smaller sizes of rod are well-suited to low heat on thin metals. Use on all types of mild steel. Great for light gauge metal, sheet metal, duct work. AC, DCEP, DCEN recommended polarity. 83000 psi tensile strength and 70 to 110 A.
ROD WELD 7018 MILD 5/32IN 10LB ROD WELDING STEEL 1/8INCH 10LB WELDING ROD 1/8IN 7014 10LB
Forney? E7018 is a low hydrogen, electrode recommended for welding applications involving structural steel, construction, pressure vessels, boilers, pipes, bridges, power plants, naval and other high-strength steels where hydrogen control is imperative. This electrode displays a stable arc, smooth and finely rippled bead pattern and easy slag removal. E6010 an all-purpose electrode used in all positions. A deep penetrating rod for carbon and galvanized steel, E6010 is for use with a DC welder and runs on DCEP. Ideal for welding through light to medium amounts of dirt, rust or paint. Recommended polarity IS DCEP (reverse polarity). Tensile strength 80000 psi, 35 to 125 A. Forney? E7014 is suitable for welding carbon and low-alloy steels. This is a general-purpose, high deposition electrode. It operates at higher amperage than other general-purpose electrodes such as E6013. This electrode is also suitable for thinner materials where minimal penetration is sufficient. The Forney? E7014 produces a smooth and finely rippled bead pattern and easy slag release.
ELECTRODE STEEL 40LB 1/8IN    ELECTRODE STEEL 40LB 5/32IN   ELECTRODE STEEL 40LB 1/8IN
Produce quality results on smaller amperage AC/DC welders. Low hydrogen content reduces cracking and peeling of the weld material. Features excellent restart capability. Designed for welding low, medium and high-carbon steels as well as some higher strength low alloy steel. For frames, trailer hitches and chassis. Recommended Polarities are AC, DCEN, DCEP (either polarity). 5/32 in Dia, weight 5 lb (2.26 kg), 84000 psi tensile strength, 140 to 190 A. Produce quality results on smaller amperage AC/DC welders. Low hydrogen content reduces cracking and peeling of the weld material. Features excellent restart capability. Designed for welding low, medium and high-carbon steels as well as some higher strength low alloy steel. For frames, trailer hitches and chassis. Recommended Polarities are AC, DCEN, DCEP (either polarity). 5/32 in Dia, weight 5 lb (2.26 kg), 84000 psi tensile strength, 140 to 190 A. General-purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints. Smaller sizes of rod are well-suited to low heat on thin metals. Use on all types of mild steel. Great for light gauge metal, sheet metal, duct work. AC, DCEP, DCEN recommended polarity. 83000 psi tensile strength and 70 to 110 A.
ELECTRODE STEEL 40LB 1/8IN    ELECTRODE STEEL 40LB 5/32IN
E6011 an all-position rod with strong arc force for deep penetration. Fast metal solidification facilities welding in vertical and overhead positions. Light slag allows for easy cleanup. Excellent for rusty steel because of the strong arc force. Useful for galvanized tanks, steel casting and pressure pipe. Recommended polarities are AC, DCEP, DCEN (either polarity). 1/8 in Dia, 22.7 Kg, 88000 psi tensile strength, 35 to 125 A. General-purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints. Smaller sizes of rod are well-suited to low heat on thin metals. Use on all types of mild steel. Great for light gauge metal, sheet metal, duct work. AC, DCEP, DCEN recommended polarity. 83000 psi tensile strength and 70 to 110 A.