|
|
|
|
|
|
|
|
|
|
|
|
|
|
Blue Point Fasteners Drive Pin, Head Type: Flat, Head Diameter: 0.3 in, Shank Type: Smooth, Shank Diameter: 0.14 in, Plain, 3/4 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool
|
Blue Point Fasteners Drive Pin, Head Type: Flat, Head Diameter: 0.3 in, Shank Type: Smooth, Shank Diameter: 0.14 in, Plain, 1 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool
|
DEWALT Powder Actuated Pin, Head Diameter: 0.3 in, Shank Diameter: 0.145 in, Steel/Plastic, Silver, 3/4 in L, Suitable for: Powers PA3500EX and P3X Powder Actuated tools
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Blue Point Fasteners Drive Pin, Head Diameter: 0.3 in, Shank Type: Smooth, Shank Diameter: 0.14 in, Plain, 1-1/2 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool
|
DEWALT Powder Actuated Pin, Head Diameter: 0.3 in, Shank Diameter: 0.145 in, 1 in L, Suitable for: Powers PA3500EX and P3X Powder Actuated tools
|
The PDPA is a hardened-steel, powder-actuated fastener designed to fasten building components to concrete, steel and CMU. The PDPA consists of a fastener with a 0.3 in Dia head and a 0.157 in Dia shank. The PDPA provides maximum jobsite productivity with fast installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use with Ramset, hilti, Remington and most powder actuated tools that use 22 cal single shots, 27 cal. 10 strips and 25 cal discs. For models of low velocity powder actuated tools with 300 or larger barrel diameter. Knurled shank pins for fastening to structural steel. Diameter of 0.145 in.
|
Blue Point Fasteners Drive Pin, Head Diameter: 0.3 in, Shank Type: Smooth, Shank Diameter: 0.14 in, Plain, 2 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool
|
Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled shank designs are available for installations in thick steel base materials. A plastic flute is mounted on the pin shank to retain the drive pin in the barrel of the tool and provide guidance during the driving operation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
With 7/8 in washer to prevent overdrive and to increase holding value when fastening wood or thin metal to concrete or structural steel. Fits all Ramset, hilti, Remington and most powder actuated tools that use 22 cal single shots, 27 cal 10 shot strips and 25 cal discs. Shank diameter of 0.145 in.
|
The PDPA is a hardened-steel, powder-actuated fastener designed to fasten building components to concrete, steel and CMU. The PDPA consists of a fastener with a 0.3 in Dia head and a 0.157 in Dia shank. The PDPA provides maximum jobsite productivity with fast installation.
|
The PDPA is a hardened-steel, powder-actuated fastener designed to fasten building components to concrete, steel and CMU. The PDPA consists of a fastener with a 0.3 in Dia head and a 0.157 in Dia shank. The PDPA provides maximum jobsite productivity with fast installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Blue Point Fasteners Drive Pin, Head Diameter: 0.3 in, Shank Type: Smooth, Shank Diameter: 0.14 in, Plain, 2-1/2 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool
|
With 7/8 in washer to prevent overdrive and to increase holding value when fastening wood or thin metal to concrete or structural steel. Fits all Ramset, hilti, Remington and most powder actuated tools that use 22 cal single shots, 27 cal 10 shot strips and 25 cal discs. Shank diameter of 0.145 in.
|
Ramset Drive Pin, Head Diameter: 0.3 in, Shank Diameter: 0.145 in, Steel, Zinc, 3/4 in L, Suitable for: Remington, Bostitch, Hilti, Redhead, Ramset and Uniset Low Velocity Tools
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The PDPA is a hardened-steel, powder-actuated fastener designed to fasten building components to concrete, steel and CMU. The PDPA consists of a fastener with a 0.3 in Dia head and a 0.157 in Dia shank. The PDPA provides maximum jobsite productivity with fast installation.
|
The PDPA is a hardened-steel, powder-actuated fastener designed to fasten building components to concrete, steel and CMU. The PDPA consists of a fastener with a 0.3 in Dia head and a 0.157 in Dia shank. The PDPA provides maximum jobsite productivity with fast installation.
|
Blue Point Fasteners Drive Pin, Head Type: Flat, Head Diameter: 0.3 in, Shank Type: Smooth, Shank Diameter: 0.14 in, Plain, 3 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled shank designs are available for installations in thick steel base materials. A plastic flute is mounted on the pin shank to retain the drive pin in the barrel of the tool and provide guidance during the driving operation.
|
Ramset Drive Pin, Head Diameter: 0.3 in, Shank Diameter: 0.145 in, Powder Plated, Suitable for: Powder Actuated Tools
|
Blue Point Fasteners Drive Pin with Metal Round Washer, Head Diameter: 0.3 in, Shank Diameter: 0.14 in, 2-1/2 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Blue Point Fasteners Drive Pin with Metal Round Washer, Head Diameter: 0.3 in, Shank Diameter: 0.14 in, 3 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool
|
Use with Ramset, hilti, Remington and most powder actuated tools that use 22 cal single shots, 27 cal. 10 strips and 25 cal discs. For models of low velocity powder actuated tools with 300 or larger barrel diameter. Knurled shank pins for fastening to structural steel. Diameter of 0.145 in.
|
Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled shank designs are available for installations in thick steel base materials. A plastic flute is mounted on the pin shank to retain the drive pin in the barrel of the tool and provide guidance during the driving operation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled shank designs are available for installations in thick steel base materials. A plastic flute is mounted on the pin shank to retain the drive pin in the barrel of the tool and provide guidance during the driving operation.
|
The PDPA is a hardened-steel, powder-actuated fastener designed to fasten building components to concrete, steel and CMU. The PDPA consists of a fastener with a 0.3 in Dia head and a 0.157 in Dia shank. The PDPA provides maximum jobsite productivity with fast installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Blue Point Fasteners Drive Pin with Metal Round Washer, Head Diameter: 0.3 in, Shank Diameter: 0.14 in, 1 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool
|
Blue Point Fasteners Drive Pin with Metal Round Washer, Head Diameter: 0.3 in, Shank Diameter: 0.14 in, 1-1/4 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool
|
The PDPA is a hardened-steel, powder-actuated fastener designed to fasten building components to concrete, steel and CMU. The PDPA consists of a fastener with a 0.3 in Dia head and a 0.157 in Dia shank. The PDPA provides maximum jobsite productivity with fast installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Blue Point Fasteners Drive Pin with Metal Round Washer, Head Diameter: 0.3 in, Shank Diameter: 0.14 in, 1-1/2 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool
|
Use with Ramset, hilti, Remington and most powder actuated tools that use 22 cal single shots, 27 cal. 10 strips and 25 cal discs. For models of low velocity powder actuated tools with 300 or larger barrel diameter. Knurled shank pins for fastening to structural steel. Diameter of 0.145 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The PDPA is a hardened-steel, powder-actuated fastener designed to fasten building components to concrete, steel and CMU. The PDPA consists of a fastener with a 0.3 in Dia head and a 0.157 in Dia shank. The PDPA provides maximum jobsite productivity with fast installation.
|
Blue Point Fasteners Drive Pin with Metal Round Washer, Head Diameter: 0.3 in, Shank Diameter: 0.14 in, 2 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool
|
Coated to improve corrosion resistance in treated lumber and other applications. Fits most powder actuated tools that use 22 cal. Features single shots of 27 cal. Shank diameter of 0.145 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
With 7/8 in washer to prevent overdrive and to increase holding value when fastening wood or thin metal to concrete or structural steel. Fits all Ramset, hilti, Remington and most powder actuated tools that use 22 cal single shots, 27 cal 10 shot strips and 25 cal discs. Shank diameter of 0.145 in.
|
The PDPAWL is a powder-actuated washered pin designed to fasten building components to concrete, steel and CMU. The PDPAWL consists of a hardened-steel PDPA pin preassembled with a 1? washer that provides additional bearing surface for enhanced upload resistance. The PDPAWL is designed for use with Simpson Strong-Tie? powder-actuated tool systems as well as other common tools.
|
The PDPAWL is a powder-actuated washered pin designed to fasten building components to concrete, steel and CMU. The PDPAWL consists of a hardened-steel PDPA pin preassembled with a 1? washer that provides additional bearing surface for enhanced upload resistance. The PDPAWL is designed for use with Simpson Strong-Tie? powder-actuated tool systems as well as other common tools.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The PDPAWL is a powder-actuated washered pin designed to fasten building components to concrete, steel and CMU. The PDPAWL consists of a hardened-steel PDPA pin preassembled with a 1? washer that provides additional bearing surface for enhanced upload resistance. The PDPAWL is designed for use with Simpson Strong-Tie? powder-actuated tool systems as well as other common tools.
|
Ramset Drive Pin, Head Diameter: 0.3 in, Shank Diameter: 0.145 in, Plated
|
The PDPA is a hardened-steel, powder-actuated fastener designed to fasten building components to concrete, steel and CMU. The PDPA consists of a fastener with a 0.3 in Dia head and a 0.157 in Dia shank. The PDPA provides maximum jobsite productivity with fast installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The PDPAWL is a powder-actuated washered pin designed to fasten building components to concrete, steel and CMU. The PDPAWL consists of a hardened-steel PDPA pin preassembled with a 1? washer that provides additional bearing surface for enhanced upload resistance. The PDPAWL is designed for use with Simpson Strong-Tie? powder-actuated tool systems as well as other common tools.
|
The PDPAWL is a powder-actuated washered pin designed to fasten building components to concrete, steel and CMU. The PDPAWL consists of a hardened-steel PDPA pin preassembled with a 1? washer that provides additional bearing surface for enhanced upload resistance. The PDPAWL is designed for use with Simpson Strong-Tie? powder-actuated tool systems as well as other common tools.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use with Ramset, hilti, Remington and most powder actuated tools that use 22 cal single shots, 27 cal. 10 strips and 25 cal discs. For models of low velocity powder actuated tools with 300 or larger barrel diameter. Knurled shank pins for fastening to structural steel. Diameter of 0.145 in.
|
With 7/8 in washer to prevent overdrive and to increase holding value when fastening wood or thin metal to concrete or structural steel. Fits all Ramset, hilti, Remington and most powder actuated tools that use 22 cal single shots, 27 cal 10 shot strips and 25 cal discs. Shank diameter of 0.145 in.
|
The PDPA is a hardened-steel, powder-actuated fastener designed to fasten building components to concrete, steel and CMU. The PDPA consists of a fastener with a 0.3 in Dia head and a 0.157 in Dia shank. The PDPA provides maximum jobsite productivity with fast installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
With 7/8 in washer to prevent overdrive and to increase holding value when fastening wood or thin metal to concrete or structural steel. Fits all Ramset, Hilti, Remington and most powder actuated tools that use 22 cal single shots, 27 cal 10 shot strips and 25 cal discs. Shank diameter of 0.145 in.
|
Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled shank designs are available for installations in thick steel base materials. A plastic flute is mounted on the pin shank to retain the drive pin in the barrel of the tool and provide guidance during the driving operation. The fasteners are also available in with a mechanically galvanized (MG) coating for use in treated lumber.
|
Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled shank designs are available for installations in thick steel base materials. A plastic flute is mounted on the pin shank to retain the drive pin in the barrel of the tool and provide guidance during the driving operation. The fasteners are also available in with a mechanically galvanized (MG) coating for use in treated lumber.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ramset Drive Pin, 0.3 in Diameter Head, 0.145 in Shank Diameter, Plated, 3 in Length
|
Ramset Drive Pin, Head Diameter: 0.3 in, Steel
|
Ramset Drive Pin, 0.3 in Diameter Head, 3 in Length
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The PDPAWL is a powder-actuated washered pin designed to fasten building components to concrete, steel and CMU. The PDPAWL consists of a hardened-steel PDPA pin preassembled with a 1? washer that provides additional bearing surface for enhanced upload resistance. The PDPAWL is designed for use with Simpson Strong-Tie? powder-actuated tool systems as well as other common tools.
|
The PDPAWL is a powder-actuated washered pin designed to fasten building components to concrete, steel and CMU. The PDPAWL consists of a hardened-steel PDPA pin preassembled with a 1 in washer that provides additional bearing surface for enhanced upload resistance. The PDPAWL is designed for use with Simpson Strong-Tie? powder-actuated tool systems as well as other common tools.
|
|
|
|
