|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rain Bird Stake, 6-3/4 in Length, Plastic, Black, Suitable for: 1/2 in Poly Tubing
|
Preassembled riser and stake for use with Rain Bird 10 - 32 threaded emission devices.
|
Rain Bird Hole Punch, Plastic, Black, Suitable for: Drippers, 1/4 in Fittings
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Rain Bird EC50 1/2 in end closure is used to close a drip line system without the need of cutting the tubing which can later on be used to extend your irrigation system. Used with 1/2 in tubing or 1/2 in emitter tubing to allow for easy flushing and draining of the system.
|
Compression fitting for use with all 1/2 in drip tubing brands.
|
Rain Bird Drip Irrigation Adapter, 1/2 in Connection, Male x Barb Connection, PVC, Brown, 0 to 60 psi
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Compression fitting for use with all 1/2 in drip tubing brands.
|
This valve easily adjusts or shuts off flow in 1/4 in drip tubing runs to different sections of your plant watering area. Avoid over or under-watering of plants with different moisture needs in a timed drip zone. Barbed ends permit easy, leak-free insertion into drip tubing. Top cap turns to adjust or completely shut-off water flow, ideal for use when making repairs. Constructed of high quality, long-lasting UV resistant materials.
|
Unique design accommodates a range of hose diameters and will not blow off hose with water pressures up to 100 psi. For use with 1/2 to 0.710 in (0.520 to 0.620 in ID) hose.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Universal compression fitting tee for use with all 1/2 in drip tubing brands.
|
Double-ended, double-duty plugs seal either large or small holes in 1/2 in, 5/8 in or 0.71 in hose.
|
Used to shut-off the end of 1/4 in tubing. Removes easily.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rain Bird Drip Irrigation Adapter, 3/4 in x 1/2 in and 5/8 in Connection, FPT x Tube Connection, Polyethylene, Black, 40 psi Pressure, Suitable for: 1/2 to 5/8 in Tubing
|
Rain Bird Flush Cap Hose Plug, Universal, 1/2, 5/8 in Connection, Compression Connection, Plastic, Suitable for: 1/2 in or 5/8 in Poly Drip Tubing
|
Black poly clamps molded to fit 1/4 in tubing. Includes pre-inserted nail.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with 1/4 in (0.16 in I.D.) tube only. Connects 1/4 in tubing to faucet or other 3/4 in male hose thread. Includes filter washer.
|
3/4 in hose thread swivel x 1/2 in compression adaptor connects 1/2 in poly hose to faucet or other 3/4 in male hose thread. Includes filter washer. For use with 1/2 in (0.62 in to 0.630 in OD) hose only. Green compression ring.
|
3/4 in pipe thread swivel x 1/2 in compression adaptor connects 1/2 in poly hose to 3/4 in male pipe thread. Washer included. For use with 1/2 in (0.62 to 0.63 in OD) hose only. Green compression ring.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rain Bird Drip Irrigation Adapter, 3/4 x 1/4 in Connection, FHT x Tube Connection, Plastic, Black, 40 psi Pressure, Suitable for: 3/4 in Male Threaded Pipe Components
|
Stake 1/4 in tubing at desired locations or secure spot watering emitters. Place bug guard at end to prevent bugs and debris from clogging tubing.
|
Ideal for shrub plantings, trees, containers and flower beds.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ideal for shrub plantings, trees, containers and flower beds.
|
4 in plastic stakes hold 1/4 in tubing in place next to plants.
|
Use as an end closure for 1/4 in tubing or as a side plug for 1/2 in tubing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rain Bird Fan Micro Spray, Riser Mount, Part-Circle, 70 psi Operating, 0 to 31 gph Flow Rate, 0 to 10 ft Coverage Diameter, Black, Plastic Base, Includes: (2) Fan Micro Sprays
|
Connect 2 pieces of 1/2 in tubing.
|
Double barbed design, allows use with higher pressures, join or connect two lengths of line. 1/4 in connector used with 1/4 in (0.160 to 0.197 in ID) tube only. Double barb design allows water pressures up to 50 psi.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy-duty plastic stakes hold 1/4 in lines in place.
|
Rain Bird Mister, Threaded, Specifications: 0 to 31 gph Flow Rate, 10 to 30 psi Operating Pressure, 10-32 Threaded Inlet Type, 0 to 1-1/2 in Throw Radius, Plastic, Black
|
Apply drip watering efficiency in more places around your landscaping with this versatile staked riser with adjustable micro spray flow and height. The riser adjusts up to 18 in H and the spray adjusts from 0 to 10 ft throw, allowing you to direct water exactly where you need it in a wide variety of planting areas. It is ideal for taller plants such as shrubs and bushes well as for use in flower beds and ground cover where you may want broader coverage. Includes a sturdy 8 in stake plus 36 in L of 1/4 in tubing with barbed fitting for quick attachment to 1/2 in drip irrigation tubing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Riser adapter for drip and sprinkler watering allows both irrigation methods to be used at once, covering all plants effectively.
|
Double barbed design allows use with higher water pressures. For use with 1/4 in (0.160 to 0.197 in ID) tube only. Creates a 1/4 in branch from a 1/4 in tube or two 1/4 in branches from a 1/2 in hose. For water pressures up to 50 psi.
|
Double barbed design allows water pressure up to 50 psi.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Closes ends of 1/2 in (0.620 to 0.630 in OD) poly hose when frequent flushing is necessary. Green compression ring. Made from ABS. For water pressure up to 60 psi.
|
Used to shut-off the end of 1/2 in rain drip poly hose. Removes easily.
|
Easily adjust or shut off flow in 1/2 in or 5/8 in drip tubing runs to different sections of your plant watering area. Avoid over- or under-watering of plants with different moisture needs in the zone. Top cap turns to adjust flow. Barbed ends permit easy, leak-free insertion into drip tubing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rain Bird Mister Spray, 1/4 in Connection, Barb Connection, Spray Pattern: Full-Circle, Mist, 360 deg Spray Angle, 0 to 6 gph Flow Rate, Plastic, Black, Dimensions: 12 x 1/4 x 1/4 in
|
Connect 2 pieces of 1/2 in tubing in an "L" shape.
|
Join or connect two lengths hose. Made from ABS. For water pressure up to 60 psi.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Connect 3 pieces of 1/2 in tubing in a "T" shape.
|
Designed for comfortable use, punches holes in 1/2 in, 5/8 in or 0.710 in hose to insert PC drippers or 1/4 in fittings. Handle has socket for installing and removing Micro spray jets. Card includes hole plugs.
|
Connect 3 pieces of 1/4 in tubing in a "T" shape or tap into the side of 1/2 in tubing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For water pressure up to 60 psi. Ends are color-coded for easy size identification.
|
Rain Bird Drip Irrigation Tee with FHT Adapter, Universal, 3/4 x 1/2 in Connection, FHT x Compression Connection, Polyethylene, Black, 0 to 60 psi Pressure, Suitable for: 1/2 in End Closure, 3/4 in x 1/2 in FHT x MTH Adapter, 1/2 to 5/8 in Tubing
|
Heavy-duty 13 in stake with adjustable 8 in rigid riser for use with low-flow sprinklers and spray heads with 10-32 NFT inlets. Just screw the sprinkler/sprayer into the rigid riser moving it up or down to water above plants. Constructed of high-density polyethylene and polypropylene.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Apply drip watering efficiency in more places around your landscaping with this versatile staked riser with adjustable micro spray flow and height. The riser adjusts up to 18 in H and the spray adjusts from 0 to 10 ft throw, allowing you to direct water exactly where you need it in a wide variety of planting areas. It is ideal for taller plants such as shrubs and bushes well as for use in flower beds and ground cover where you may want broader coverage. Includes a sturdy 8 in stake plus 36 in L of 1/4 in tubing with barbed fitting for quick attachment to 1/2 in drip irrigation tubing.
|
Connect 2 pieces of 1/4 in tubing or tap into the side of 1/2 in tubing.
|
Compression tees made from ABS. For water pressure up to 60 psi.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rain Bird Free-Flow Manifold, 1/2 x 1/4 in, FPT x Barb, 6-Port, 50 psi, Gallons per Minute: 2 gpm, Black
|
Adjust, balances or shuts off water flow to watering circuits, zones or plants. For use with 1/4 in (0.160 in ID) vinyl tubing only. Double barbed design allows water pressure up to 50 psi.
|
The drippers' 0.5 GPH flow is ideal for small containers and plants with relatively low moisture needs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Uniformly sprays water over a semicircular area with an adjustable radius of up to 7 ft. Sprayer inlet size of 10-32 NFT. Featuring a knob to adjust the flow (4 to 20 gph at 25 psi) and diameter of spray.
|
Convert existing 1/2 in underground sprinkler systems to low flow watering where a drip circuit can't be set up. Adjustable bubblers are available in stream spray with a maximum spray diameter of 3 ft at 30 psi or for finer water droplets, a fan spray with spray diameter up to 13 ft at 30 psi. Bubbler flow rates are adjustable from 0 - 13 gph at 30 psi for stream type and from 0 - 24 gph at 30 psi for the fan spray. These features allow the higher flow rates required when watering large and small plants on the same circuit.
|
Convert existing 1/2 in underground sprinkler systems to low flow watering where a drip circuit can't be set up. Available in stream spray with a maximum spray diameter of 3 ft at 30 psi or for finer water droplets, a fan spray, with spray diameter up to 13 ft at 30 psi. Adjustable bubbler rotates easily to preferred water flow, from full coverage for shrubs and large potted trees to shut-off position.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Adds supplemental watering to individual plants.
|
Rain Bird Micro Umbrella Bubbler, Barb Connection, Staked Dripper Type, 70 psi Maximum, 0 to 35 gph Gallons per Hour, Spray Pattern: Full-Circle, 1/4 in Tubing Size, Black, Includes: (4) Micro Umbrella Bubblers
|
Uniformly sprays water over a semicircular area with an adjustable radius of up to 8 ft. Sprayer inlet size of 10-32 NFT. Featuring a knob to adjust the flow (4 to 20 gph at 25 psi) and diameter of spray.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use with spot watering emitters or to run water to emitter tubing.
|
3/4 in hose female thread inlet; 3/4 in male hose thread outlet. Includes filter washer. Available in 3/4 in BSP threads. Atmospheric vacuum breaker made of high impact ABS. Keeps impure water from syphoning back into water supply. Maximum flow rate of 480 GPH.
|
Atmospheric vacuum breakers made of high-impact ABS. Keeps impure water from syphoning back into water supply. 3/4 in hose female thread inlet, 3/4 in male pipe thread outlet. Includes filter washer. Available in 3/4 in BSP threads.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Half circle, Ideal for shrub plantings, trees, containers and flower beds. Connect to 1/2 in tubing with barbed coupling (included) and 1/4 in tubing. Spray pattern 180 deg rotation.
|
Uniformly sprays water over a full circle with an adjustable diameter of up to 15 ft. Sprinkler Inlet size of 10-32 NFT. Featuring a knob to adjust the flow (4 to 20 gph at 25 psi) and diameter of spray.
|
Easy way to add or remove spot watering emitters, fittings and plugs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sprays 12 individual streams over a circular area with an adjustable diameter of up to 18 ft. For windy conditions, sprayer inlet size is 10-32 NFT. Featuring a knob to adjust the flow (4 to 20 gph at 25 psi) and diameter of spray.
|
Connect to 1/2 in tubing with barbed coupling (included) and 1/4 in tubing.
|
Rain Bird Micro Bubbler, Barb Connection, Self-Piercing Dripper Type, 40 psi Maximum, 0 to 13 gph Gallons per Hour, Spray Pattern: Full-Circle, 1/2 in Tubing Size, Black, Includes: (4) Micro Bubblers
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Remains strong in the hot sun, flexible in cool temperatures. Black Color.
|
Rain Bird Pressure Regulator, FHT Inlet Connection Type, MHT Outlet Connection Type, 20 gpm Flow Rate, 25 psi Pressure, Black, 1.3 in Length, 10.2 in Width, 6-1/2 in Height
|
Quickly and easily connects to any 3/4 male pipe threaded (MPT) outdoor faucet, garden hose or component. Safely prevents backward flow of water from a drip irrigation system into your potable/clean drinking water supply. Stainless steel 150 mesh filter catches debris to help keep system functioning properly. Simply thread into place; take care fitting is fully tightened so rubber gasket can correctly seal assuring leak-proof performance. Constructed of highly durable UV and chemical-resistant materials to assure long life.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy-gauge galvanized wire secures 1/2 in tubing to the ground.10 Pack.
|
Adjustable mister and 4 in high-density polyethylene riser with 1/4 in barbed adaptors. Adjustable from fine to heavy mist up to 3 ft Dia. Flow rate 4 to 7 gph at 25 psi.
|
Adds supplemental watering to individual plants.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for use on level ground and shorter circuits. Ideal for heavy soil (clay).
|
Designed for use on level ground and shorter circuits. Self-cleaning turbulent flow dripper for use with 1/4 in tubing. Ideal for medium soil (loam). Color-coded as red/black base.
|
Flexible pressure regulators for drip watering systems, sprinklers and misters only. Molded high-impact ABS.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For landscape and container plants. Maintains constant flow rate even on hillsides or long circuits. Red (1/2 gph) - ideal for heavy soil (clay). Black (1 gph) - ideal for medium soil (loam) Green (2 gph) - ideal for light soil (sandy).
|
For landscape and container plants. Maintains constant flow rate even on hillsides or long circuits. Red (1/2GPH) - Ideal for heavy soil (clay). Black-(1GPH) - Ideal for medium soil(loam) Green -(2GPH) Ideal for light soil (sandy).
|
For landscape and container plants. Maintains constant flow rate even on hillsides or long circuits. Red (1/2 gph) - ideal for heavy soil (clay). Black (1 gph) - ideal for medium soil(loam) Green (2 gph) - ideal for light soil (sandy).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Flexible pressure regulators for drip watering systems, sprinklers and misters only. Molded high-impact ABS.
|
Drip watering bubbler. Adjustable bubbler rotates easily to preferred water flow - from full coverage for shrubs and large potted trees to shut-off position.
|
1/2 in blank (distribution) tubing is used to run water from an outside faucet or other water source to the planting area. Kink-resistant materials help provide dependable water flow. Connect tubing sections and 1/2 in emitter tubing with Rain Bird 1/2 in barbed or compression fittings. To place watering devices near plants, add 1/4 in tubing runs by tapping into the side of this 1/2 in tubing with 1/4 in barbed couplings.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Blank tubing. 1/4 in distribution tubing for drip irrigation. 6 mm OD. Connects with Rain Bird 1/4 in barbed fittings.
|
Rain Bird Dripper Emitter, 1/4, 1/2 in Connection, Barb Connection, Dripper Type: Flag Style, Maximum Pressure: 40 psi, Gallons per Hour: 1 gph, Spray Pattern: Drip, Tubing Size: 1/4, 1/2 in, Plastic, Black
|
Remains strong in the hot sun, flexible in cool temperatures. Color-Black.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Professional quality Raindrip 1/2 in hose is made from linear, low-density polyethylene (poly). Composed of 2.2% carbon black and UV inhibitors, it can be left out year-round, buried or on the surface, in any weather. Great to hose made from reprocessed materials.
|
Rain Bird Inline Filter, MNPT Inlet Connection Type, MNPT Outlet Connection Type, 0.2 to 5 gpm Flow Rate, 150 psi Pressure, Black, 2-1/8 in Length, 6 in Width, 4-3/8 in Height
|
Designed for comfortable use. Punches holes 1/2 in, 5/8 in or 0.710 in hose to insert PC drippers or 1/4 in fittings.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rain Bird Manifold, 1/2 x 1/4 in Connection, FPT x Barb Connection, 9 Ports, 25 psi Maximum, 1/4 in Tubing Size, ABS, Black
|
1/2 in blank (distribution) tubing is used to run water from an outside faucet or other water source to the planting area. Kink-resistant materials help provide dependable water flow. Connect tubing sections and 1/2 in emitter tubing with Rain Bird 1/2 in barbed or compression fittings. To place watering devices near plants, add 1/4 in tubing runs by tapping into the side of this 1/2 in tubing with 1/4 in barbed couplings.
|
Removes dirt particles from water supply, feeds plants automatically as they are watered. Handles up to 720 GPH through 150 mesh (100 micron) stainless steel or poly screen element. Recommended for well water. Includes hose/pipe swivel coupling. Filter inlets and outlets are NPT.
|
|
|
