|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dundas Jafine's adjustable or releasable plastic clamps are ideal for use with flexible aluminum foil and vinyl ducts. They also feature a quick-release self-locking clasp.
|
For flexible aluminum duct.
|
Used for secure connection to flexible aluminum duct.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
These clamps are designed with an easy-to-use pressure mechanism for use in various applications. They are designed for use without any tools on non-rigid flexible ducts.
|
These clamps are made up of zinc-plated steel and are ideal for the installation of most home and industrial dryers. Their unique design allows for easy-to-tighten convenience. Clamps can also be used on most bath fans and other applications.
|
Dundas Jafine's metal worm gear clamps are ideal for use with semi-rigid or rigid aluminum ducts. They are made of heavy-duty galvanized steel and are ideal for fastening ducts to aluminum pipes or elbows.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For flexible aluminum duct.
|
These clamps are made up of zinc-plated steel and are ideal for the installation of most home and industrial dryers. Their unique design allows for easy-to-tighten convenience. Clamps can also be used on most bath fans and other applications.
|
Dundas Jafine's metal worm gear clamps are ideal for use with semi-rigid or rigid aluminum ducts. They are made of heavy-duty galvanized steel and are ideal for fastening ducts to aluminum pipes or elbows.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dundas Jafine's aluminum snap lock pipe can be used for venting most types of heating units. This product features an easy to close snap lock system for easy opening and closing of the pipe and is available in various sizes. This product is 0.012 in thick and will not meet most building codes for in wall use.
|
Increases from 3 to 4 in and reduces from 4 to 3 in.
|
Lambro Vent Elbow, 3 in, 26 ga, Aluminum, For: Duct
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dundas Jafine's aluminum elbows can be used to vent most types of heating units. This product features an all aluminum, four-piece construction and is fully adjustable to 90 deg. Includes one crimped end and one solid end to ease assembly. The E432 heavy-duty aluminum elbow is made of 0.016 in ga aluminum which is thicker than our traditional elbow. This heavy-duty elbow offers more rigidity to the application and better handling to the contractor.
|
Dundas Jafine's family of metal duct connectors are used to attach two pieces of flexible duct together. The 4 in versions are also ideal for extending the exhaust collar of your clothes dryer. All our duct connectors are made of aluminum and some models may include two plastic adjustable or releasable clamps for easy use and assembly.
|
Lambro Adjustable Duct Elbow, Material Gauge: 26 ga, Aluminum, Dimensions: 4 in Dia x 8 in H
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Lambro Vent Hose, 4 in ID, 8 ft L, Vinyl, White, Includes: (1) Vinyl Duct
|
Includes hose and two plastic clamps. Not recommended for venting or high temperature venting. Polybagged.
|
Flexible aluminumaluminum foil LamaFlex duct is ideal for applications where building codes require use of all aluminum duct. The duct has a maximum operating temperature of 250 deg F.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
UL listed.
|
Semi-rigid aluminum duct is ideal for applications where building codes require use of all aluminum duct. The duct is totally non-combustible with a maximum operating temperature of 400 deg F.
|
Aluminum film laminate.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Lambro Vent Hose, 4 in ID, 20 ft L, Vinyl, White, Includes: (1) Vinyl Duct
|
Flexible aluminumaluminum foil LamaFlex duct is ideal for applications where building codes require use of all aluminum duct. The duct has a maximum operating temperature of 250 deg F.
|
The ProFlex? dryer duct is ideal for both gas and electric clothes dryer applications. This duct is UL2158A listed and marked for safe dryer venting and is constructed of heavy-duty, fire-resistant, 4-ply aluminum foil laminate that encapsulates a high density, corrosion-resistant wire helix. This forms an airtight and easy-to-use air duct. This duct will not support combustion.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The semi-rigid aluminum duct is ideal for applications where code requires an all aluminum product. This duct is totally non-combustible with a maximum operating temperature of 435 deg F. Dundas Jafine is now pleased to offer a new UL listed and marked version of the semi-rigid aluminum duct. This particular duct is UL2158A listed and marked and can be used in applications where the dryer manufacturer calls for a UL version of an all aluminum product. The UL duct is thicker than the standard version and new manufacturing technology incorporated into the duct allows for easy rotation and therefore more durable handling of the duct by the contractor.
|
Ideal for bathroom fan venting and other general purpose exhaust applications. Made from 3 ply aluminum foil laminate with a maximum operating temperature of 250??F. UL versions of this item are available if required by code. UL ducts are UL181 listed and marked.
|
UL 181, Class 1 air connector label for general venting. Multiply design of metalized polyester with 1 in pitch steel wire support.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Lambro flexible semi-rigid 4 inch x 8 foot duct is ideal for general purpose venting applications including bathroom fan and kitchen range hood exhausting. The corrugations throughout the duct prevents collapsing and allows for easily bending the duct when needed. The class 0 aluminum is corrosion resistant non-combustible and fire resistant with a maximum operating temperature of 482?F. Check local building codes prior to installation. Do not use for clothes dryer installations (UL 2158A duct must be used).
|
UL listed. Easy to install, fits in tight places where rigid metal ducting will not work.
|
Ideal when all aluminum duct is required by code in some gas and electric dryer applications. Totally noncombustible with a maximum operating temperature of 435??F. The UL duct is thicker than the standard version.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Silverduct? UL? 2158A clothes dryer transition duct provides flame resistance. It crushes easily behind the dryer and is held together with layers of aluminum foil and polyester plastic. Clothes dryer manufacturers may limit the use of plastics in venting. Check the dryer warranty and installation instructions as well as your local building codes for appropriate use.
|
The semi-rigid aluminum duct is ideal for applications where code requires an all aluminum product. This duct is totally non-combustible with a maximum operating temperature of 435 deg F. This particular duct is UL2158A listed and marked and can be used in applications where the dryer manufacturer calls for a UL version of an all aluminum product. The UL duct is thicker than the standard version and new manufacturing technology incorporated into the duct allows for easy rotation and therefore more durable handling of the duct by the contractor.
|
Listed and labeled as UL foil dryer transition duct. Steel wire supported, multiply design of aluminum and polyester. Dryer manufacturers do not recommend venting containing any plastic.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Lambro Snap Lock Pipe, Aluminum, 4 in Dia, 60 in L
|
The semi-rigid aluminum duct is ideal for applications where code requires an all aluminum product. This duct is totally non-combustible with a maximum operating temperature of 435 deg F. Dundas Jafine is now pleased to offer a new UL Listed and Marked version of the semi-rigid aluminum duct. This particular duct is UL2158A listed and marked and can be used in applications where the dryer manufacturer calls for a UL version of an all aluminum product. The UL duct is thicker than the standard version and new manufacturing technology incorporated into the duct allows for easy rotation and therefore more durable handling of the duct by the contractor.
|
UL listed for clothes dryer connection. Aluminum semi-rigid flexible duct. Without clamps. Bulk packed only.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4 in aluminum soft-cuff on both ends. Pre-treated ends are ready to clamp to other components. Sturdy construction meets dryer manufacturer specifications. Includes 2 steel clamps for vent kit.
|
For dryer venting. 4 in aluminum Snap-Lock fittings clamp to standard connections or snap without clamps to other Snap-Lock fittings. Compressed to 24in L. Sturdy construction meets dryer manufacturer specifications.
|
UL listed for clothes dryer connection. Aluminum semi-rigid flexible duct. Includes 2 clamps. Polybagged.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Lambro 4-inch x 25-foot UL 181 air connector ideally serves the purpose of bath fan exhaust and any other general venting applications that require the expulsion of moist air and humidity from the home.
|
Lambro Vent Hose, 3 in ID, 50 ft L, Vinyl, White, Includes: (1) Vinyl Duct
|
Lambro Vent Hose, 4 in ID, 50 ft L, Vinyl, White, Includes: (1) Vinyl Duct
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used for secure connection to flexible aluminum duct.
|
UL 181, Class 1 air connector label for general venting. Multiply design of metalized polyester with 1 in pitch steel wire support.
|
Imperial Semi-Rigid Dryer Duct, Aluminum, 4 in Dia Inside, 8 ft L
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Lambro Dryer Vent Pipe, Aluminum
|
Dundas Jafine's aluminum snap lock pipe can be used for venting most types of heating units. This product features an easy to close snap lock system for easy opening and closing of the pipe and is available in various sizes.
|
|
|
|
