|
|
|
|
|
|
|
|
|
|
|
|
|
|
Inner and outer pipe. The outer pipe, made of galvanized steel, provides cooling air necessary to maintain safe chimney temperatures, while the inner pipe, made of stainless steel, emits gases out of the fireplace. Snap- lock design. 12 in standard pipe (12 ID, 15 3/8 OD) UL127 listed 1700 deg pipe.
|
Inner and outer pipe. The outer pipe, made of galvanized steel, provides cooling air necessary to maintain safe chimney temperatures, while the inner pipe, made of stainless steel, emits gases out of the fireplace. Snap- lock design. 12 in standard pipe (12 in ID, 15-3/8 in OD) UL127 Listed 1700 deg pipe.
|
The Selkirk Chimney System (SCS) is ideal for venting residential heating appliances burning wood, 2-oil and natural and LP gas. They have been specifically designed for today's modern, high-efficiency "airtight" wood stoves. They are designed for gravity (natural draft), non-positive internal pressure venting only. The SCS is usable on any appliance having a power burner (such as an oil furnace) if that appliance operates with neutral or negative draft at its outlet.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Inner and outer pipe. The outer pipe, made of galvanized steel, provides cooling air necessary to maintain safe chimney temperatures, while the inner pipe, made of stainless steel, emits gases out of the fireplace. Snap- lock design. 12 in standard pipe (12 in ID, 15-3/8 in OD) UL127 Listed 1700 deg pipe.
|
Pipe sections combine corrosion-resistant stainless steel and sturdy galvanized steel for strong chimney construction. Lightweight pipe with snap-lock joints offers faster, easier installations. Features a space-age refractory blanket between the stainless steel/galvanized walls to withstand intermittent temperatures up to 2100 deg F as called for in UL 103 HT Standard. Requires 2 in air space to combustibles.
|
The Selkirk Chimney System (SCS) is ideal for venting residential heating appliances burning wood, 2-oil and natural and LP gas. They have been specifically designed for today's modern, high-efficiency "airtight" wood stoves. They are designed for gravity (natural draft), non-positive internal pressure venting only. The SCS is usable on any appliance having a power burner (such as an oil furnace) if that appliance operates with neutral or negative draft at its outlet.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Inner and outer pipe. The outer pipe, made of galvanized steel, provides cooling air necessary to maintain safe chimney temperatures, while the inner pipe, made of stainless steel, emits gases out of the fireplace. Snap- lock design. 12 in standard pipe (12 in ID, 15-3/8 in OD) UL127 Listed 1700 deg pipe.
|
Pipe sections combine corrosion-resistant stainless steel and sturdy galvanized steel for strong chimney construction. Lightweight pipe with snap-lock joints offers faster, easier installations. Features a space-age refractory blanket between the stainless steel/galvanized walls to withstand intermittent temperatures up to 2100 deg F as called for in UL 103 HT Standard. Requires 2 in air space to combustibles.
|
The Selkirk Chimney System (SCS) is ideal for venting residential heating appliances burning wood, 2-oil and natural and LP gas. They have been specifically designed for today's modern, high-efficiency "airtight" wood stoves. They are designed for gravity (natural draft), non-positive internal pressure venting only. The SCS is usable on any appliance having a power burner (such as an oil furnace) if that appliance operates with neutral or negative draft at its outlet.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Selkirk Chimney System (SCS) is ideal for venting residential heating appliances burning wood, 2-oil and natural and LP gas. They have been specifically designed for today's modern, high-efficiency "airtight" wood stoves. They are designed for gravity (natural draft), non-positive internal pressure venting only. The SCS is usable on any appliance having a power burner (such as an oil furnace) if that appliance operates with neutral or negative draft at its outlet.
|
The Selkirk Chimney System (SCS) is ideal for venting residential heating appliances burning wood, 2-oil and natural and LP gas. They have been specifically designed for today's modern, high-efficiency "airtight" wood stoves. They are designed for gravity (natural draft), non-positive internal pressure venting only. The SCS is usable on any appliance having a power burner (such as an oil furnace) if that appliance operates with neutral or negative draft at its outlet.
|
The Selkirk Chimney System (SCS) is ideal for venting residential heating appliances burning wood, 2-oil and natural and LP gas. They have been specifically designed for today's modern, high-efficiency "airtight" wood stoves. They are designed for gravity (natural draft), non-positive internal pressure venting only. The SCS is usable on any appliance having a power burner (such as an oil furnace) if that appliance operates with neutral or negative draft at its outlet.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Inner and outer pipe. The outer pipe, made of galvanized steel, provides cooling air necessary to maintain safe chimney temperatures, while the inner pipe, made of stainless steel, emits gases out of the fireplace. Snap- lock design. 12 in standard pipe (12 in ID, 15-3/8 in OD) UL127 Listed 1700 deg pipe.
|
Pipe sections combine corrosion-resistant stainless steel and sturdy galvanized steel for strong chimney construction. Lightweight pipe with snap-lock joints offers faster, easier installations. Features a space-age refractory blanket between the stainless steel/galvanized walls to withstand intermittent temperatures up to 2100 deg F as called for in UL 103 HT Standard. Requires 2 in air space to combustibles.
|
Inner and outer pipe. The outer pipe, made of galvanized steel, provides cooling air necessary to maintain safe chimney temperatures, while the inner pipe, made of stainless steel, emits gases out of the fireplace. Snap- lock design. 12 in standard pipe (12 in ID, 15-3/8 in OD) UL127 Listed 1700 deg pipe.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Selkirk Chimney System (SCS) is ideal for venting residential heating appliances burning wood, 2-oil and natural and LP gas. They have been specifically designed for today's modern, high-efficiency "airtight" wood stoves. They are designed for gravity (natural draft), non-positive internal pressure venting only. The SCS is usable on any appliance having a power burner (such as an oil furnace) if that appliance operates with neutral or negative draft at its outlet.
|
The Selkirk Chimney System (SCS) is ideal for venting residential heating appliances burning wood, 2-oil and natural and LP gas. They have been specifically designed for today's modern, high-efficiency "airtight" wood stoves. They are designed for gravity (natural draft), non-positive internal pressure venting only. The SCS is usable on any appliance having a power burner (such as an oil furnace) if that appliance operates with neutral or negative draft at its outlet.
|
FMI Offset and Return Elbow, For: Wood Burning at 1700 deg Standard Pipes
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pipe sections combine corrosion-resistant stainless steel and sturdy galvanized steel for strong chimney construction. Lightweight pipe with snap-lock joints offers faster, easier installations. Features a space-age refractory blanket between the stainless steel/galvanized walls to withstand intermittent temperatures up to 2100 deg F as called for in UL 103 HT Standard. Requires 2 in air space to combustibles.
|
The Selkirk Chimney System (SCS) is ideal for venting residential heating appliances burning wood, 2-oil and natural and LP gas. They have been specifically designed for today's modern, high-efficiency "airtight" wood stoves. They are designed for gravity (natural draft), non-positive internal pressure venting only. The SCS is usable on any appliance having a power burner (such as an oil furnace) if that appliance operates with neutral or negative draft at its outlet.
|
Pipe sections combine corrosion-resistant stainless steel and sturdy galvanized steel for strong chimney construction. Lightweight pipe with snap-lock joints offers faster, easier installations. Features a space-age refractory blanket between the stainless steel/galvanized walls to withstand intermittent temperatures up to 2100 deg F as called for in UL 103 HT Standard. Requires 2 in air space to combustibles.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Selkirk Chimney System (SCS) is ideal for venting residential heating appliances burning wood, 2-oil and natural and LP gas. They have been specifically designed for today's modern, high-efficiency "airtight" wood stoves. They are designed for gravity (natural draft), non-positive internal pressure venting only. The SCS is usable on any appliance having a power burner (such as an oil furnace) if that appliance operates with neutral or negative draft at its outlet.
|
Used to start chimneys indoors or outdoors using a wall support assembly or a masonry pier. A length of insulated chimney pipe is attached to the tee snout, using a Locking Band, to pass safely through combustible walls. An insulated tee cap is included which can be removed from bottom opening for inspection and cleanout. Maximum height of chimney which can be supported by an insulated tee is 50 ft.
|
The Selkirk Chimney System (SCS) is ideal for venting residential heating appliances burning wood, 2-oil and natural and LP gas. They have been specifically designed for today's modern, high-efficiency "airtight" wood stoves. They are designed for gravity (natural draft), non-positive internal pressure venting only. The SCS is usable on any appliance having a power burner (such as an oil furnace) if that appliance operates with neutral or negative draft at its outlet.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pipe sections combine corrosion-resistant stainless steel and sturdy galvanized steel for strong chimney construction. Lightweight pipe with snap-lock joints offers faster, easier installations. Features a space-age refractory blanket between the stainless steel/galvanized walls to withstand intermittent temperatures up to 2100 deg F as called for in UL 103 HT Standard. Requires 2 in air space to combustibles.
|
Can be used for fixed offsets of 15 deg slope or in pairs for offsets adjustable from zero to 30 deg slope. Greater angles are prohibited by UL standard 103 and by the terms of the product listing. Required locking bands (2 packaged with each elbow kit) allow 360 deg rotation and lock the components together in place at the exact offset required. Insulated elbows can be used at the same 2 in air space clearance as chimney sections. Includes 2 elbows, 2 locking bands and interior resupport.
|
The Selkirk Chimney System (SCS) is ideal for venting residential heating appliances burning wood, 2-oil and natural and LP gas. They have been specifically designed for today's modern, high-efficiency "airtight" wood stoves. They are designed for gravity (natural draft), non-positive internal pressure venting only. The SCS is usable on any appliance having a power burner (such as an oil furnace) if that appliance operates with neutral or negative draft at its outlet.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Selkirk Chimney System (SCS) is ideal for venting residential heating appliances burning wood, 2-oil and natural and LP gas. They have been specifically designed for today's modern, high-efficiency "airtight" wood stoves. They are designed for gravity (natural draft), non-positive internal pressure venting only. The SCS is usable on any appliance having a power burner (such as an oil furnace) if that appliance operates with neutral or negative draft at its outlet.
|
Used to start chimneys indoors or outdoors using a wall support assembly or a masonry pier. A length of insulated chimney pipe is attached to the Tee snout, using a locking band, to pass safely through combustible walls. An insulated tee cap is included which can be removed from bottom opening for inspection and cleanout. Maximum height of chimney which can be supported by an insulated Tee is 50 ft.
|
Can be used for fixed offsets of 15 deg slope or in pairs for offsets adjustable from zero to 30 deg slope. Greater angles are prohibited by UL standard 103 and by the terms of the product listing. Required locking bands (2 packaged with each elbow kit) allow 360 deg rotation and lock the components together in place at the exact offset required. Insulated elbows can be used at the same 2 in air space clearance as chimney sections. Includes 2 elbows, 2 locking bands and interior resupport.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Can be used for fixed offsets of 30 deg slope. Greater angles are prohibited by UL Standard 103 and by the terms of the product listing. Required Locking bands (2 packaged with each elbow kit) are to be used at each joint. Each offset must be resupported. Elbows rotate 360 deg to provide the exact orientation required. Insulated elbows can be used at the same 2 ft air space clearance as chimney sections. Kit includes 2 elbows, 2 locking bands and one interior resupport.
|
Can be used for fixed offsets of 30 deg slope. Greater angles are prohibited by UL Standard 103 and by the terms of the product listing. Required locking bands (2 packaged with each elbow kit) are to be used at each joint. Each offset must be resupported. Elbows rotate 360 deg to provide the exact orientation required. Insulated elbows can be used at the same 2 ft air space clearance as chimney sections. Kit Includes 2 elbows, 2 locking bands and one interior resupport.
|
Chimney tee, tee branch (made up of one 12 in section of chimney), single wall adaptor, pipe end plate and tee cap. Use this combination where connection to chimney is made in branch of tee in through-the-wall installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use in pairs to permit chimney to go around in joists, rafters or other projections. Add chimney section between offsets to produce additional offset.
|
For use in pairs to permit chimney to go around in joists, rafters or other projections. Add chimney section between offsets to produce additional offset.
|
Chimney tee, tee branch (made up of one 12 in section of chimney), single wall adaptor, pipe end plate and tee cap. Use this combination where connection to chimney is made in branch of tee in through-the-wall installation.
|
|
|
