|
|
|
|
|
|
|
|
|
|
|
|
|
|
Prevents submersible power cable from rubbing against side of the well. Made from strong polyethylene. Adjustable for 4 to 6 in casing. Easy to use, snap-in wire guide. With split circle wire hole.
|
B & K ProLine Check Valve, Nominal Size: 1/2 in, IPS Connection, Trim Material: Stainless Steel, Body Material: PVC, Softgoods Material: Neoprene, White, 200 psi, Temperature Rating: 73 deg F, Includes: (10) Check Valves
|
B & K ProLine Check Valve, Nominal Size: 3/4 in, IPS Connection, Trim Material: Stainless Steel, Body Material: PVC, Softgoods Material: Neoprene, White, 200 psi
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Wire sizes 3-wire 10-12-14. Sleeve size 3/8 in x 3 in.
|
Fits both SCH 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air.
|
Compression sleeve for 3 wire. Wire sizes for 3 wire 10-12-14 submersible cable.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For all charging applications. For use with conventional tanks.
|
Suitable for air, steam or water. Easy to read dial face. Steel case with glass face, accurate reading assured. Brass socket connection.
|
Suitable for air, steam or water. Easy to read dial face. Steel case with glass face, accurate reading assured. Brass socket connection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Lead-free, steel case, brass mount. 1/8 in CBM connection.
|
B & K ProLine Check Valve, Nominal Size: 1 in, IPS Connection, Trim Material: Stainless Steel, Body Material: PVC, Softgoods Material: Neoprene, White, 200 psi, Temperature Rating: 73 deg F, Includes: (8) Check Valves
|
Fits both SCH 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
"Plastic and wax impregnated oak-tan leather cups for regular service. No.3X2 - Use with #2 Pitcher Pump for 3"" Cylinder. No.31/2X21/4 - Use with #3 Pitcher Pump for 31/2"" Cylinder."
|
For all charging applications. For use with conventional tanks.
|
Waterproof impregnated lower valve for regular service.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastic and wax impregnated oak-tan leather cups for regular service. #3x2, use with #2 pitcher pump for 3 in cylinder. #31/2x21/4, use with #3 pitcher pump for 31/2 in cylinder.
|
B & K ProLine Check Valve, Nominal Size: 1-1/4 in, IPS Connection, Trim Material: Stainless Steel, Body Material: PVC, White, 200 psi, Temperature Rating: 72 deg F
|
B & K ProLine Check Valve, Nominal Size: 1-1/2 in, IPS Connection, Trim Material: Stainless Steel, Body Material: PVC, Softgoods Material: Neoprene, White, 200 psi, Temperature Rating: 73 deg F, Includes: (6) Check Valves
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits both SCH 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air.
|
Fits both SCH 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air.
|
Fits both SCH 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastic and wax impregnated oak-tan leather cups for regular service. #3x2, use with #2 pitcher pump for 3 in cylinder. #31/2x21/4, use with #3 pitcher pump for 31/2 in cylinder.
|
Fits 1 in or 1-1/4 in drop pipe, 4 in to 8 in well casing. Supplied with two stainless steel clamps.
|
Certified to NSF 61 requirements.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bulk pack.
|
Certified to NSF 61 requirements.
|
Waterproof impregnated lower valve for regular service.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used in jet pump water systems. Maintains proper charge in conventional tanks. Prolongs pump life by reducing frequency of cycling. No AV-45 80 Maximum Tank Gallons, 1/4 in FIP. No AV-100 100 Maximum Tank Gallons, 3/8 in FIP. 42 Maximum Tank Gallons, 1/4 in FIP.
|
Reduces OD to allow for greater waterway. Entire coupling galvanized.
|
Plastic and wax impregnated oak-tan leather cups for regular service. #3x2, use with #2 pitcher pump for 3 in cylinder. #31/2x21/4, use with #3 pitcher pump for 31/2 in cylinder.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Simmons Cup, Leather, Dimensions: 3 x 2 in, Suitable for: Pitcher Pump
|
Used in jet pump water systems. Maintains proper charge in conventional tanks. Prolongs pump life by reducing frequency of cycling. No AV-45 80 Maximum Tank Gallons, 1/4 in FIP. No AV-100 100 Maximum Tank Gallons, 3/8 in FIP. 42 Maximum Tank Gallons, 1/4 in FIP.
|
Fits both SCH 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Nylon body construction. Corrosion-resistant parts. Fits four pipe sizes such as 3/4 in, 1 in, 1-1/4 in and 1-1/2 in.
|
Designed for proper driving of well points. Has inside recess to prevent damage to pipe threads. Octagon-shaped for positive wrenching. Threads are standard pipe size, small vent hole in top of casting relieves pressure during driving operation.
|
B & K ProLine Check Valve, Nominal Size: 2 in, IPS Connection, Trim Material: Stainless Steel, Body Material: PVC, White, 200 psi, Temperature Rating: 72 deg F
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Spring-loaded poppet, O-ring seal, threaded ends comply to ANSI B1.20.1.
|
SharkBite Max check valves are spring-loaded and designed to prevent the reverse flow of water. Max check valves can be installed horizontally or vertically. Compatible with PEX, copper, CPVC, PE-RT or HDPE SDR-9 in any combination, Max check valves are ideal for working in tight spaces and can be rotated after assembly.
|
Plastic and wax impregnated oak-tan leather cups for regular service. #3x2, use with #2 pitcher pump for 3 in cylinder. #31/2x21/4, use with #3 pitcher pump for 31/2 in cylinder.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cast brass finish. Pressure only relief valve. Factory preset at 75 psi.
|
Simmons Adapter, Nominal Size: 1 in, Male Insert Connection, Red Brass
|
1 in insert rope adapter.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Certified to NSF 61 requirements.
|
SharkBite Max check valves are spring-loaded and designed to prevent the reverse flow of water. Max check valves can be installed horizontally or vertically. Compatible with PEX, copper, CPVC, PE-RT or HDPE SDR-9 in any combination, Max check valves are ideal for working in tight spaces and can be rotated after assembly.
|
Spring loaded poppet, O-ring seal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Lasco Foot Valve with Strainer, 1 in Connection, FIP Connection, Seal Type: O-Ring, Body Material: Brass, Strainer Material: Stainless Steel, Spring Material: Stainless Steel
|
Water pump pressure switches suitable for use on all types of pumps including jet, submersible and reciprocating. 2 Pole, NEMA 1 enclosure, diaphragm actuated, UL/CSA Listed, RoHS compliant, NSF61-Annex G certified. Individually boxed.
|
Schneider Electric Square D brand of pressure switches have set the standard for reliability, efficiency and durability. As the most trusted brand in residential, commercial and industrial pumping applications, Square D pressure switches continue to meet the daily needs of the water systems industry.
* FHG2 ? 40-100 PSIG Cut-out Range, 20 PSIG Approx. Adjustable Differential
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Square D Water Pump Pressure Switch, 115 to 230 V, Contact Form: DP, Number of Phases: 1, NPSF Connection, Enclosure Type: NEMA 1, Dimensions: 2.78 in L x 3.76 in W x 2.8 in H, Body Material: Polypropylene, Working Pressure: 20 to 40 psi
|
A53 galvanized grade B hot roll electric weld.
|
Water pump pressure switches suitable for use on all types of pumps including jet, submersible and reciprocating. 2 Pole, NEMA Type 1 indoor enclosure, 1/4 in NPSF or internal pressure connection, diaphragm actuated, UL/CSA Listed, RoHS compliant, NSF61-Annex G certified.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Water pump pressure switches suitable for use on all types of pumps including jet, submersible and reciprocating. 2 Pole, NEMA Type 1 indoor enclosure, 1/4 in NPSF or internal pressure connection, diaphragm actuated, UL/CSA Listed, RoHS compliant, NSF61-Annex G certified.
|
Water pump pressure switches suitable for use on all types of pumps including jet, submersible, and recriprocating. 2 Pole, NEMA 1 enclosure, diaphragm actuated, UL/CSA Listed, RoHS compliant, NSF61-Annex G certified. Rated for 1.5 hp at 115 v and 2 hp at 230 v. Individually boxed.
|
Simmons Adapter, Nominal Size: 1-1/4 in, Male Insert Connection, Red Brass
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For #22368A pump. Complete with rod.
|
Water pump pressure switch factory set to 20 to 40 psi. Suitable for use on all types of pumps including jet, submersible and reciprocating. 2 Pole, NEMA Type 1 indoor enclosure, 1/4 in NPSF internal pressure connection, diaphragm actuated, UL/CSA listed, RoHS compliant, NSF61-Annex G certified, includes low-pressure cut-off to stop pump in the event of run dry or a line break. Individually boxed.
|
Water pump pressure switches suitable for use on all types of pumps including jet, submersible and reciprocating. 2 Pole, NEMA 1 enclosure, diaphragm actuated, UL/CSA Listed, RoHS compliant, NSF61-Annex G certified. Individually boxed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Water pump pressure switches suitable for use on all types of pumps including jet, submersible and reciprocating. 2 Pole, NEMA 1 enclosure, diaphragm actuated, UL/CSA Listed, RoHS compliant, NSF61-Annex G certified. Individually boxed.
|
Water pump pressure switch factory set to 30 to 50 psi. Suitable for use on all types of pumps including jet, submersible and reciprocating. 2 Pole, NEMA Type 1 indoor enclosure, 1/4 in NPSF internal pressure connection, diaphragm actuated, UL/CSA Listed, RoHS compliant, NSF61-Annex G certified, includes low-pressure cut-off to stop pump in the event of run dry or a line break. Individually boxed.
|
Certified to NSF 61 requirements.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Spring-loaded poppet, O-ring seal, threaded ends comply to ANSI B1.20.1.
|
Water pump pressure switch factory set to 30-50 psi. Suitable for use on all types of pumps including jet, submersible and reciprocating. 2 Pole, NEMA Type 1 indoor enclosure, 1/4 in NPSF internal pressure connection, diaphragm actuated, UL/CSA listed, RoHS compliant, NSF61-Annex G certified, includes a maintained manual cut-out lever allowing the pump to run on auto or to be turned off. Individually boxed.
|
Schneider Electric Square D brand of pressure switches have set the standard for reliability, efficiency and durability. As the most trusted brand in residential, commercial and industrial pumping applications, Square D pressure switches continue to meet the daily needs of the water systems industry.
* FHG12 ? 70-150 PSIG Cut-out Range, 30 PSIG Approx. Adjustable Differentia
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Schneider Electric Square D brand of pressure switches have set the standard for reliability, efficiency and durability. As the most trusted brand in residential, commercial and industrial pumping applications, Square D pressure switches continue to meet the daily needs of the water systems industry.
|
For effective seal against pollution and contamination of wells from surface drainage. Many state health departments have adopted codes which require the sealing of water wells. Well is perfectly sealed by expanding the high-quality of rubber packet, drawing together the top and bottom castings by tightening of belts. Boxed.
|
For effective seal against pollution and contamination of wells from surface drainage. Many state health departments have adopted codes which require the sealing of water wells. Well is perfectly sealed by expanding the high-quality of rubber packet, drawing together the top and bottom castings by tightening of belts. Boxed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Boshart Tank Tee, Nominal Size: 1 x 3/4 in, MPT x FPT Connection
|
Certified to NSF 61 requirements.
|
For domestic water systems, air compressors (not requiring mechanical release valves and where pressure does not exceed 65 psi) and miscellaneous applications for gases and liquids which are not harmful to the Buna-N-diaphragm or the plated steel diaphragm housing. 1/4 in FNPTF connection 1 hp at 120/240 VAC, 1-, 2-, 3-phase. 1/4 hp at 32 VDC. Carded.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Silicon bronze cast body and poppet contain less than 0.05% lead. Furnished with Buna-N O-ring, stainless steel perforated strainer, spring and locknut. No 404SB enters 2 in pipe. 400 psi working pressure.
|
The EB75 is a compact, iron-body pressure reducing and regulating valve designed for installations where small size and economy are important. Because of the iron body, this valve is not recommended for use in potable water applications. The EB75 comes factory set at 45 psi but has an adjustment range of 10 to 70 psi. The valve also comes in a low-pressure range of 0-20 psi.
|
Air volume control for standard air-over-water tanks. Use with submersible pump.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 in x 10 in long tank cross, silicon bronze fabricated with copper pipe and male fitting, one 1/2 in female tap in top of cross, 3/4 in FIP x 1 in MIP tapping on each leg.
|
Silicon bronze cast body and poppet contain less than 0.05% Lead. Furnished with Buna-N O-ring, stainless steel perforated strainer, spring and locknut. No 404SB enters 2 in pipe. 400 psi working pressure.
|
Tank leg length 10 in, female tapping each leg 3/4 in, male tapping each leg 1 in, female tapping top of cross both 1/2 in, two female tappings on side 1/4 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Silicon bronze cast body and poppet contain less than 0.05% Lead. Furnished with Buna-N O-ring, stainless steel spring, washer and locknut. All valves 1/2 in through 1-1/2 in have a working pressure of 400 psi. All valves 2 in and larger have a working pressure of 600 psi.
|
The EB-45 Series is a lead-free one 1/2 cartridge based pressure reducing and regulating valve with a bronze body. The valve construction is similar to a traditional regulator in that it retains a separate spring chamber and adjusting screw, but offers the simplicity and maintenance benefits of a cartridge based valve. The EB-45 is assembled using modular construction methods and features end connections threaded for both FIP and union in 1/2 in through 2 in sizes. The EB-45 is intended for use where supply line pressure does not exceed 300 psi (400 psi 1/2 in, 3/4 in and 1 in). The EB-45 pressure regulators are supplied by the factory with a standard delivery setting of 45 psi. The outlet pressure can be adjusted from 10 to 70 psi without changing the spring. This regulator is suited for either cold or hot (to 180 deg F) water service.
|
Silicon bronze cast body and poppet contain less than 0.05% lead. Furnished with Buna-N O-ring, stainless steel spring, washer and locknut. All valves 1/2 in through 1-1/2 in have a working pressure of 400 psi. All valves 2 in and larger have a working pressure of 600 psi.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For effective seal against pollution and contamination of wells from surface drainage. Many state health departments have adopted codes which require the sealing of water wells. Well is perfectly sealed by expanding the high-quality of rubber packet, drawing together the top and bottom castings by tightening of belts. Boxed.
|
Float switch is designed for use in open tank or sump pump applications. Reverse action contacts open on liquid rise. 2-pole, NEMA 1 enclosure, bracket mounted, screw clamp terminals, UL/CSA listed, RoHS compliant, contacts open on liquid rise. Individually boxed.
|
Silicon bronze cast body and poppet contain less than 0.05% Lead. Furnished with Buna-N O-ring, stainless steel spring, washer and locknut. All valves 1/2 in through 1-1/2 in have a working pressure of 400 psi. All valves 2 in and larger have a working pressure of 600 psi.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Certified to NSF 61 requirements.
|
Silicon bronze cast body and poppet. Stainless steel perforated strainer.
|
Silicon bronze cast body and poppet. Stainless steel perforated strainer.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Silicon bronze cast body and poppet contain less than 0.05% lead. Furnished with Buna-N O-ring, stainless steel perforated strainer, spring and locknut. No 404SB enters 2 in pipe. 400 psi working pressure.
|
For effective seal against pollution and contamination of wells from surface drainage. Many state health departments have adopted codes which require the sealing of water wells. Well is perfectly sealed by expanding the high-quality of rubber packet, drawing together the top and bottom castings by tightening of belts. Boxed.
|
The EB-45 Series is a lead-free one 1/2 cartridge based pressure reducing and regulating valve with a bronze body. The valve construction is similar to a traditional regulator in that it retains a separate spring chamber and adjusting screw, but offers the simplicity and maintenance benefits of a cartridge based valve. The EB-45 is assembled using modular construction methods and features end connections threaded for both FIP and union in 1/2 in through 2 in sizes. The EB-45 is intended for use where supply line pressure does not exceed 300 psi (400 psi 1/2 in, 3/4 in and 1 in). The EB-45 pressure regulators are supplied by the factory with a standard delivery setting of 45 psi. The outlet pressure can be adjusted from 10 to 70 psi without changing the spring. This regulator is suited for either cold or hot (to 180 deg F) water service.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Maximum 100 psi pressure rating for residential use. Heavy diaphragm designed for extended life, locking ring, high-grade polypropylene liner, durable steel base. NSF Standard 61 listed meets FDA requirements for potable water. Maximum operating temperature is 200 deg F. Factory pre-charged to 38 psi. Made in the USA. 5 year limited warranty.
|
The EB-45 Series is a lead-free one 1/2 cartridge based pressure reducing and regulating valve with a bronze body. The valve construction is similar to a traditional regulator in that it retains a separate spring chamber and adjusting screw, but offers the simplicity and maintenance benefits of a cartridge based valve. The EB-45 is assembled using modular construction methods and features end connections threaded for both FIP and union in 1/2 in through 2 in sizes. The EB-45 is intended for use where supply line pressure does not exceed 300 psi (400 psi 1/2 in, 3/4 in and 1 in). The EB-45 pressure regulators are supplied by the factory with a standard delivery setting of 45 psi. The outlet pressure can be adjusted from 10 to 70 psi without changing the spring. This regulator is suited for either cold or hot (to 180 deg F) water service.
|
Apollo Reducing Valve, Nominal Size: 3/4 in, FNPT Connection, Operating Pressure: 400 psi, Media: Water, Body Material: Bronze, Dimensions: 3-5/8 in W x 5-1/2 in H, Temperature Rating: 180 deg F
|
|
|
