Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PIPE
Choose a sub category:
STEEL PIPE- GALVANIZED STEEL PIPE-BLACK COPPER TUBING-RIGID
COPPER TUBING-COILS PVC PRESSURE PIPE PVC-DWV PIPE
PVC-SEWER & DRAIN CPVC PIPE / CPVC TUBING ABS PIPE
CORRUGATED DRAIN
Sort By:
Page of 2
Cardel Industries REF-1/4 Refrigeration Copper Tubing Cardel Industries REF-1/8 Refrigeration Copper Tubing Cardel REF-3/16 Refrigeration Copper Tubing
Streamline? copper tube provides the strength, precision and cleanliness needed for the demanding conditions of HVAC and refrigeration applications. Preferred throughout the industry, our products have set the benchmark for HVACR copper tube. Streamline? Nitrogenized? ACR copper tube is pressurized with nitrogen to provide maximum protection against the formation of harmful oxides normally formed during brazing operations. Reduction of these oxides greatly reduces system contamination. Streamline? refrigeration service tube is of a consistent dead soft temper, bright, thoroughly dried or dehydrated and packed in shrink wrapping plus individual cartons for the highest level of protection. Streamline? copper tube provides the strength, precision and cleanliness needed for the demanding conditions of HVAC and refrigeration applications. Preferred throughout the industry, our products have set the benchmark for HVACR copper tube. Streamline? Nitrogenized? ACR copper tube is pressurized with nitrogen to provide maximum protection against the formation of harmful oxides normally formed during brazing operations. Reduction of these oxides greatly reduces system contamination. Streamline? refrigeration service tube is of a consistent dead soft temper, bright, thoroughly dried or dehydrated and packed in shrink wrapping plus individual cartons for the highest level of protection. Streamline? copper tube provides the strength, precision and cleanliness needed for the demanding conditions of HVAC and refrigeration applications. Preferred throughout the industry, our products have set the benchmark for HVACR copper tube. Streamline? Nitrogenized? ACR copper tube is pressurized with nitrogen to provide maximum protection against the formation of harmful oxides normally formed during brazing operations. Reduction of these oxides greatly reduces system contamination. Streamline? refrigeration service tube is of a consistent dead soft temper, bright, thoroughly dried or dehydrated and packed in shrink wrapping plus individual cartons for the highest level of protection.
Cardel Industries 1/4X60L Copper Tubing Cardel Industries REF-5/16 Refrigeration Copper Tubing Cardel Industries REF-3/8 Refrigeration Copper Tubing
Streamline? copper tube sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper tube products to support most all plumbing supply and DWV applications, Streamline? copper tube is available in all common types including K-type, L-type, M-type and DWV. Each piece of tube is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper tube the preferred and specified brand of industry professionals. Streamline? copper tube provides the strength, precision and cleanliness needed for the demanding conditions of HVAC and refrigeration applications. Preferred throughout the industry, our products have set the benchmark for HVACR copper tube. Streamline? Nitrogenized? ACR copper tube is pressurized with nitrogen to provide maximum protection against the formation of harmful oxides normally formed during brazing operations. Reduction of these oxides greatly reduces system contamination. Streamline? refrigeration service tube is of a consistent dead soft temper, bright, thoroughly dried or dehydrated and packed in shrink wrapping plus individual cartons for the highest level of protection. Streamline? copper tube provides the strength, precision and cleanliness needed for the demanding conditions of HVAC and refrigeration applications. Preferred throughout the industry, our products have set the benchmark for HVACR copper tube. Streamline? Nitrogenized? ACR copper tube is pressurized with nitrogen to provide maximum protection against the formation of harmful oxides normally formed during brazing operations. Reduction of these oxides greatly reduces system contamination. Streamline? refrigeration service tube is of a consistent dead soft temper, bright, thoroughly dried or dehydrated and packed in shrink wrapping plus individual cartons for the highest level of protection.
Cardel Industries REF-1/2 Refrigeration Copper Tubing Namasco BLK 1/2 Steel Pipe Cardel Industries 3/8X60L Copper Tubing
Streamline? copper tube provides the strength, precision and cleanliness needed for the demanding conditions of HVAC and refrigeration applications. Preferred throughout the industry, our products have set the benchmark for HVACR copper tube. Streamline? Nitrogenized? ACR copper tube is pressurized with nitrogen to provide maximum protection against the formation of harmful oxides normally formed during brazing operations. Reduction of these oxides greatly reduces system contamination. Streamline? refrigeration service tube is of a consistent dead soft temper, bright, thoroughly dried or dehydrated and packed in shrink wrapping plus individual cartons for the highest level of protection. Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use. Ordered by the length only. Streamline? copper tube sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper tube products to support most all plumbing supply and DWV applications, Streamline? copper tube is available in all common types including K-type, L-type, M-type and DWV. Each piece of tube is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper tube the preferred and specified brand of industry professionals.
Genova 3100572 Solid Wall Cold Water Cut Pipe 2 ft Cardel Industries 1/2X20L Copper Tubing Cardel Industries REF-5/8 Refrigeration Copper Tubing
Charlotte Pipe Pipe, Nominal Size: 1/2 in, 2 ft L, 600 psi, Operating Temperature: 32 to 140 deg F, Schedule Rating: SCH 40, PVC, White Streamline? copper pipe sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper pipe products to support most all plumbing supply and DWV applications, Streamline? copper pipe is available in all common types including K-type, L-type, M-type and DWV. Each piece of pipe is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper pipe the preferred and specified brand of industry professionals. Streamline? copper tube provides the strength, precision and cleanliness needed for the demanding conditions of HVAC and refrigeration applications. Preferred throughout the industry, our products have set the benchmark for HVACR copper tube. Streamline? Nitrogenized? ACR copper tube is pressurized with nitrogen to provide maximum protection against the formation of harmful oxides normally formed during brazing operations. Reduction of these oxides greatly reduces system contamination. Streamline? refrigeration service tube is of a consistent dead soft temper, bright, thoroughly dried or dehydrated and packed in shrink wrapping plus individual cartons for the highest level of protection.
Genova 3100772 Solid Wall Cold Water Cut Pipe 2 ft PIPE PLN END SCH 40 1/2INX5FT Genova 500052 Solid Cut Pipe
Charlotte Pipe Pipe, Nominal Size: 3/4 in, 2 ft L, 480 psi, Operating Temperature: 140 deg F, Schedule Rating: SCH 40, PVC, White Charlotte Pipe Cut Pipe, Nominal Size: 1/2 in, 5/8 in Dia Outside, 2 ft L, CPVC
Namasco GALV 1/2 Steel Pipe Namasco BLK 3/4 Steel Pipe Cardel Industries 1/2X60L Copper Tubing
Standard weight, coupled and threaded for steam and water working pressure up to 150 lb. Ordered by the length only. Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use. Ordered by the length only. Streamline? copper pipe sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper pipe products to support most all plumbing supply and DWV applications, Streamline? copper pipe is available in all common types including K-type, L-type, M-type and DWV. Each piece of pipe is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper pipe the preferred and specified brand of industry professionals.
Genova 300 Pipe Genova 300 Cold Water Pressure Pipe 10 ft PIPE PLN END SCH 40 3/4INX5FT
Charlotte Pipe Pipe, Plain End, Solid Wall, Nominal Size: 1/2 in, 10 ft L, 600 psi, Operating Temperature: 140 deg F, Schedule Rating: SCH 40, PVC, White JM Eagle solvent weld SDR Series pipes are suitable for use in pressurized irrigation applications. JM Eagle's PVC solvent weld pressure-rated pipes come in SDR 41, SDR 32.5, SDR 26, SDR 21 and SDR 13.5. The pipes are available in 20 ft lengths, bell end, in 1/2 to 12 in Dia. Solvent weld joints are designed to provide a rigid joint connection, and the schedule-rated products are specifically engineered for use in partial support systems above ground. JM Eagle also manufactures this pipe in purple for reclaimed water systems.
Cardel Industries REF-3/4 Refrigeration Copper Tubing Namasco GALV 3/4 Steel Pipe Genova 31007 Cold Water Pressure Pipe 10 ft
Streamline? copper tube provides the strength, precision and cleanliness needed for the demanding conditions of HVAC and refrigeration applications. Preferred throughout the industry, our products have set the benchmark for HVACR copper tube. Streamline? Nitrogenized? ACR copper tube is pressurized with nitrogen to provide maximum protection against the formation of harmful oxides normally formed during brazing operations. Reduction of these oxides greatly reduces system contamination. Streamline? refrigeration service tube is of a consistent dead soft temper, bright, thoroughly dried or dehydrated and packed in shrink wrapping plus individual cartons for the highest level of protection. Standard weight, coupled and threaded for steam and water working pressure up to 150 pounds. Ordered by the length only. Charlotte Pipe Pipe, Plain End, Solid Wall, Nominal Size: 3/4 in, 1-1/20 in Dia Outside, 10 ft L, 200 psi, Schedule Rating: SDR 21, PVC, White
Cardel Industries 3/4X20L Copper Tubing Cardel Industries 1/2X60K Copper Tubing Genova 3101072 Solid Wall Cold Water Cut Pipe 2 ft
Streamline? copper pipe sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper pipe products to support most all plumbing supply and DWV applications, Streamline? copper pipe is available in all common types including K-type, L-type, M-type and DWV. Each piece of pipe is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper pipe the preferred and specified brand of industry professionals. Streamline? copper tube sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper tube products to support most all plumbing supply and DWV applications, Streamline? copper tube is available in all common types including K-type, L-type, M-type and DWV. Each piece of tube is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper tube the preferred and specified brand of industry professionals. Charlotte Pipe Pipe, Nominal Size: 1 in, 2 ft L, 450 psi, Operating Temperature: 32 to 140 deg F, Schedule Rating: SCH 40, PVC, White
Namasco BLK 1 Steel Pipe Genova 300 Pipe Genova 31010 Cold Water Pressure Pipe 10 ft
Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use. Ordered by the length only. Charlotte Pipe Pipe, Plain End, Solid Wall, Nominal Size: 3/4 in, 10 ft L, 480 psi, Schedule Rating: SCH 40, PVC Charlotte Pipe Pipe, Plain End, Solid Wall, Nominal Size: 1 in, 10 ft L, 200 psi, Operating Temperature: 23 deg C, Schedule Rating: SDR 21, PVC
PIPE PLAIN END SCH 40 1INX5FT Genova 3101172 Solid Wall Cold Water Cut Pipe 2 ft Genova 500072 Solid Cut Pipe
Charlotte Pipe Pipe, Nominal Size: 1-1/4 in, 2 ft L, 370 psi, Operating Temperature: 32 to 140 deg F, Schedule Rating: SCH 40, PVC, White Charlotte Pipe Cut Pipe, Nominal Size: 3/4 in, 7/8 in Dia Outside, 2 ft L, CPVC
Namasco GALV 1 Steel Pipe Cardel 1/2X2 Copper Tubing Cardel Industries 3/4X60L Copper Tubing
Standard weight, coupled and threaded for steam and water working pressure up to 150 pounds. Ordered by the length only. Streamline? copper pipe sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper pipe products to support most all plumbing supply and DWV applications, Streamline? copper pipe is available in all common types including K-type, L-type, M-type and DWV. Each piece of pipe is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper pipe the preferred and specified brand of industry professionals. Streamline? copper tube sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper tube products to support most all plumbing supply and DWV applications, Streamline? copper tube is available in all common types including K-type, L-type, M-type and DWV. Each piece of tube is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper tube the preferred and specified brand of industry professionals.
Genova 700 Dwv Cut Pipe Namasco BLK 11/4 Steel Pipe DRAIN PIPE PERF FLEX 4INX8FT
Charlotte Pipe Cut Pipe, Nominal Size: 1-1/2 in, 2 ft L, 330 psi, Operating Temperature: 140 deg F, Schedule Rating: SCH 40, PVC, White Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use. Ordered by the length only. Exceeds ASTM standards and is made with no-break copolymers for professional-grade strength and integrity. Proprietary peak and valley design offers greater surface area and a 30% higher load-bearing rating than standard corrugated pipe. Perforated pipe with sock is ideal for French drain application in fine soil. Fittings available to adapt to 3 or 4 in, corrugated pipe and 4 in PVC. Ideal for tight spaces and curvy places, taping joints is not necessary. This pipe has spaced slits, so water drains in stages. It's also ideal for applications such as French drains or dispersing water from flower beds, but works even better in locations where surrounding soil or sand is fine and requires filtration or where debris is considerable.
DRAIN PIPE SOLID FLEX 4INX8FT PIPE PLN END SCH40 1-1/4INX5FT Genova 500 Pipe
Great for diverting water from one place to another, water will not seep out until it reaches the end of the pipe. Cresline CPVC Flowguard Gold? pipe is produced using specially formulated CPVC 4120 Flowguard Gold material to meet or exceed ASTM D2846 standards and is NSF-approved for drinking water use. CPVC Flowguard Gold pipe is tan in color with a yellow stripe and is available in plain end.
Namasco GALV 11/4 Steel Pipe Genova 300 Pipe Genova 300 Cold Water Pressure Pipe 20 ft
Standard weight, coupled and threaded for steam and water working pressure up to 150 lb. Ordered by the length only. Charlotte Pipe Pipe, Plain End, Solid Wall, 1 in Nominal, 10 ft Length, 450 psi Pressure, SCH 40 Schedule, PVC JM Eagle solvent weld Schedule Series pipes are suitable for use in both pressure and drain, waste and vent applications. JM Eagle's wide line of solvent weld includes PVC schedule 40 and 80 for both pressure and non-pressure applications. The pipes are available in 10 or 20 ft lengths, in 1/2 to 16 in Dia in schedule 40, bell end and 1/2 to 12 in Dia in schedule 80, plain end. JM Eagle's ASTM 1785 product also comes in a specially formulated PVC material to increase resistance to ultraviolet rays. Called SolarBlok, it comes in IPS, 20 ft lengths, in brown. Solvent weld joints are designed to provide a rigid joint connection and the schedule-rated products are specifically engineered for use in partial support systems above ground. A 20 ft length of solvent weld schedule 40 PVC water pipe weighs approximately 72 lb.
Genova 700 Dwv Cut Pipe PIPE DWV SCH 40 1-1/2IN X 5FT Namasco BLK 11/2 Steel Pipe
Charlotte Pipe Cut Pipe, Nominal Size: 2 in, 2 ft L, 280 psi, Operating Temperature: 140 deg F, Schedule Rating: SCH 40, PVC, White Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use. Ordered by the length only.
Cardel Industries 3/4X60K Copper Tubing Genova 30007 Cold Water Pressure Pipe 20 ft Cardel 1/2X2 Copper Tubing
Streamline? copper tube sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper tube products to support most all plumbing supply and DWV applications, Streamline? copper tube is available in all common types including K-type, L-type, M-type and DWV. Each piece of tube is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper tube the preferred and specified brand of industry professionals. Charlotte Pipe Pipe, Bell End, Solid Wall, Nominal Size: 3/4 in, 20 ft L, 200 psi, Schedule Rating: SCH 21, PVC Streamline? copper pipe sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper pipe products to support most all plumbing supply and DWV applications, Streamline? copper pipe is available in all common types including K-type, L-type, M-type and DWV. Each piece of pipe is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper pipe the preferred and specified brand of industry professionals.
Namasco GALV 11/2 Steel Pipe Cardel 3/4X2 Copper Tubing Namasco BLK 2 Steel Pipe
Standard weight, coupled and threaded for steam and water working pressure up to 150 lb. Ordered by the length only. Streamline? copper pipe sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper pipe products to support most all plumbing supply and DWV applications, Streamline? copper pipe is available in all common types including K-type, L-type, M-type and DWV. Each piece of pipe is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper pipe the preferred and specified brand of industry professionals. Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use. Ordered by the length only.
Genova 31011 Cold Water Pressure Pipe 10 ft Genova 300 Pipe Genova 300 Cold Water Pressure Pipe 20 ft
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit. JM Eagle solvent weld Schedule Series pipes are suitable for use in both pressure and drain, waste and vent applications. JM Eagle's wide line of solvent weld includes PVC schedule 40 and 80 for both pressure and non-pressure applications. The pipes are available in 10 or 20 ft lengths, in 1/2 to 16 in Dia in schedule 40, bell end and 1/2 to 12 in Dia in schedule 80, plain end. JM Eagle's ASTM 1785 product also comes in a specially formulated PVC material to increase resistance to ultraviolet rays. Called SolarBlok, it comes in IPS, 20 ft lengths, in brown. Solvent weld joints are designed to provide a rigid joint connection and the schedule-rated products are specifically engineered for use in partial support systems above ground. A 20 ft length of solvent weld schedule 40 PVC water pipe weighs approximately 72 lb. JM Eagle solvent weld Schedule Series pipes are suitable for use in both pressure and drain, waste and vent applications. JM Eagle's wide line of solvent weld includes PVC schedule 40 and 80 for both pressure and non-pressure applications. The pipes are available in 10 or 20 ft lengths, in 1/2 to 16 in Dia in schedule 40, bell end and 1/2 to 12 in Dia in schedule 80, plain end. JM Eagle's ASTM 1785 product also comes in a specially formulated PVC material to increase resistance to ultraviolet rays. Called SolarBlok, it comes in IPS, 20 ft lengths, in brown. Solvent weld joints are designed to provide a rigid joint connection and the schedule-rated products are specifically engineered for use in partial support systems above ground. A 20 ft length of solvent weld schedule 40 PVC water pipe weighs approximately 72 lb.
Genova 30010 Cold Water Pressure Pipe 20 ft Genova 700 Cellular Core Solvent Weld Dwv Pipe PIPE DWV SCH 40 2IN X 5FT
PIPE DWV SCH 40 2IN X 5FT
Our Price: $10.99
JM Eagle solvent weld SDR Series pipes are suitable for use in pressurized irrigation applications. JM Eagle's PVC solvent weld pressure-rated pipes come in SDR 41, SDR 32.5, SDR 26, SDR 21 and SDR 13.5. The pipes are available in 20 ft lengths, bell end, in 1/2 to 12 in Dia. Solvent weld joints are designed to provide a rigid joint connection, and the schedule-rated products are specifically engineered for use in partial support systems above ground. JM Eagle also manufactures this pipe in purple for reclaimed water systems. JM Eagle's wide line of solvent weld pipe includes PVC schedule 30 and 40 in solid wall and schedule 40 in cellular-core. Solvent weld joints are designed to provide a rigid (or restrained) joint connection in a solid core, schedule 30 pipe is available in 3-1/4 in Dia and schedule 40 is available in 1/2 through 16 in Dia. Schedule 40 cellular-core is available in 1-1/2 through 12 in Dia. DWV pipe comes in 10 and 20 ft lengths in plain and bell end.
Genova 700 Pipe Genova 500 Pipe Hancor 03510010 Regular Solid Single Wall Pipe 10 ft
JM Eagle solvent weld Schedule Series pipes are suitable for use in both pressure and drain, waste and vent applications. JM Eagle's wide line of solvent weld includes PVC schedule 40 and 80 for both pressure and non-pressure applications. The pipes are available in 10 or 20 ft lengths, in 1/2 to 16 in Dia in schedule 40, bell end and 1/2 to 12 in Dia in schedule 80, plain end. JM Eagle's ASTM 1785 product also comes in a specially formulated PVC material to increase resistance to ultraviolet rays. Called SolarBlok, it comes in IPS, 20 ft lengths, in brown. Solvent weld joints are designed to provide a rigid joint connection and the schedule-rated products are specifically engineered for use in partial support systems above ground. A 20 ft length of solvent weld schedule 40 PVC water pipe weighs approximately 72 lb. Cresline CPVC Flowguard Gold? pipe is produced using specially formulated CPVC 4120 Flowguard Gold material to meet or exceed ASTM D2846 standards and is NSF-approved for drinking water use. CPVC Flowguard Gold pipe is tan in color with a yellow stripe and is available in plain end. Our heavy-duty pipe for use in non-pressure drainage applications. Made of high-density polyethylene. CSA approved.
Cardel Industries 1/2X5 Copper Tubing Namasco GALV 2 Steel Pipe Cardel Industries RC2510 Copper Tubing
Mueller Copper Tubing, Type M, 1/2 in Nominal, 5 ft Length, Copper Standard weight, coupled and threaded for steam and water working pressure up to 150 lb. Ordered by the length only. Streamline Copper Tubing, 10 ft L, General-Purpose, Copper Pipe Shape: Coil, 1/4 in Dia Outside, Copper
Genova 700 Cellular Core Solvent Weld Dwv Pipe Genova 700 Pipe Cardel 3/4X2 Copper Tubing
PVC SCH 40 is highly durable, with high tensile and impact strength. It is easy to install and has better sound deadening qualities than PVC SCH 40 DWV foam core. Installation requires the use of primer and solvent cement. For pressure applications, sharply angled pressure fittings must be used. Charlotte Pipe Pipe, Nominal Size: 2 in, 2-3/8 in Dia Outside, Wall Thickness: 0.154 in, 10 ft L, 280 psi, Operating Temperature: 140 deg F, Schedule Rating: SCH 40, PVC, White Mueller Copper Tubing, Type L, 3/4 in Nominal, 2 ft Length, Copper
Cardel 12033 Copper Tubing Genova 300 Cold Water Pressure Pipe 20 ft Genova 31012 Cold Water Pressure Pipe 10 ft
Streamline? copper tube provides the strength, precision and cleanliness needed for the demanding conditions of HVAC and refrigeration applications. Preferred throughout the industry, our products have set the benchmark for HVACR copper tube. Streamline? Nitrogenized? ACR copper tube is pressurized with nitrogen to provide maximum protection against the formation of harmful oxides normally formed during brazing operations. Reduction of these oxides greatly reduces system contamination. Streamline? refrigeration service tube is of a consistent dead soft temper, bright, thoroughly dried or dehydrated and packed in shrink wrapping plus individual cartons for the highest level of protection. JM Eagle solvent weld Schedule Series pipes are suitable for use in both pressure and drain, waste and vent applications. JM Eagle's wide line of solvent weld includes PVC schedule 40 and 80 for both pressure and non-pressure applications. The pipes are available in 10 or 20 ft lengths, in 1/2 to 16 in Dia in schedule 40, bell end and 1/2 to 12 in Dia in schedule 80, plain end. JM Eagle's ASTM 1785 product also comes in a specially formulated PVC material to increase resistance to ultraviolet rays. Called SolarBlok, it comes in IPS, 20 ft lengths, in brown. Solvent weld joints are designed to provide a rigid joint connection and the schedule-rated products are specifically engineered for use in partial support systems above ground. A 20 ft length of solvent weld schedule 40 PVC water pipe weighs approximately 72 lb. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit.
Genova Products 80011F ABS-DWV Foam Core Pipe Hancor HY-PF1-04-0010 Perforated Single Wall Pipe Hancor 04540010H Solid Single Wall Pipe
JM Eagle's wide line of solvent weld ABS pipe is available in 5, 10 and 20 ft lengths in Dia of 1-1/2 to 6 in. ABS pipes are available in both solid and cellular core. Solvent weld joints are designed to provide a rigid (or restrained) joint connection. Heavy-duty pipe is ideal for field drainage, foundation or window well drainage, downspout or landscape and pond overflow. Hancor heavy duty pipe for use in non-pressure drainage applications. Made of high density polyethylene. CSA approved.
Hancor 04020010H Drain Pipe Genova 300 Cold Water Pressure Pipe Cardel Industries 1/2X5 Copper Tubing
Our channel-flow pipe is used as the distribution pipe in conventional gravel-filled leach fields. JM Eagle solvent weld SDR Series pipes are suitable for use in pressurized irrigation applications. JM Eagle's PVC solvent weld pressure-rated pipes come in SDR 41, SDR 32.5, SDR 26, SDR 21 and SDR 13.5. The pipes are available in 20 ft lengths, bell end, in 1/2 to 12 in Dia. Solvent weld joints are designed to provide a rigid joint connection, and the schedule-rated products are specifically engineered for use in partial support systems above ground. JM Eagle also manufactures this pipe in purple for reclaimed water systems. Streamline? copper pipe sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper pipe products to support most all plumbing supply and DWV applications, Streamline? copper pipe is available in all common types including K-type, L-type, M-type and DWV. Each piece of pipe is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper pipe the preferred and specified brand of industry professionals.
Genova 300 Cold Water Pressure Pipe 20 ft Genova 700 Dwv Cut Pipe Genova 400 Perforated Solvent Weld Sewer and Drain Pipe
Charlotte Pipe Pipe, Bell End, Solid Wall, Nominal Size: 1 in, 20 ft L, 450 psi, Schedule Rating: SCH 40, PVC Charlotte Pipe Cut Pipe, Nominal Size: 3 in, 2 ft L, 260 psi, Operating Temperature: 140 deg F, Schedule Rating: SCH 40, PVC, White JM Eagle's makes PVC ASTM D3034 SDR 35 sewer pipe in 10 and 20 ft lengths, bell end, in 3, 4 and 6 in Dia and PVC ASTM D2729 drain pipe in 10 ft lengths, bell end, in 3, 4 and 6 in Dia. They are available perforated and non-perforated. Solvent weld joints are designed to provide a rigid (or restrained) joint connection and the schedule-rated products are specifically engineered for use in partial support systems above ground.
Genova 400 Solid Solvent Weld Sewer and Drain Pipe Cardel Industries 3/4X5 Copper Tubing Genova Products 560010 CPVC Pipe
Charlotte Pipe Sewer and Drain Pipe, Bell End, Nominal Size: 3 in, 3-1/4 in Dia Outside, Wall Thickness: 0.07 in, 10 ft L, Operating Temperature: 32 to 140 deg F, PVC, White Used for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage. Cresline Pipe, Nominal Size: 1 in, 1-1/8 in Dia Outside, Wall Thickness: 0.102 in, 10 ft L, Plain Connection, 100 psi, CPVC
Genova Products 80021F ABS-DWV Foam Core Pipe Cardel Industries 12035 Copper Tubing Genova 300 Cold Water Pressure Pipe 20 ft
JM Eagle's wide line of solvent weld ABS pipe is available in 5, 10 and 20 ft lengths in Dia of 1-1/2 to 6 in. ABS pipes are available in both solid and cellular core. Solvent weld joints are designed to provide a rigid (or restrained) joint connection. Streamline? copper tube provides the strength, precision and cleanliness needed for the demanding conditions of HVAC and refrigeration applications. Preferred throughout the industry, our products have set the benchmark for HVACR copper tube. Streamline? Nitrogenized? ACR copper tube is pressurized with nitrogen to provide maximum protection against the formation of harmful oxides normally formed during brazing operations. Reduction of these oxides greatly reduces system contamination. Streamline? refrigeration service tube is of a consistent dead soft temper, bright, thoroughly dried or dehydrated and packed in shrink wrapping plus individual cartons for the highest level of protection. Charlotte Pipe Pipe, Type 1, Plain End, Solid Wall, Nominal Size: 3/4 in, 20 ft L, 690 psi, Schedule Rating: SCH 80, PVC, Gray
Genova 40040 Solid Sewer Pipe Genova 40041 Perforated Sewer Pipe Cambridge-Lee 1/2X10M Type M Water Tube
Charlotte Pipe Sewer and Drain Pipe, Bell End, Nominal Size: 4 in, 4.215 in Dia Outside, Wall Thickness: 0.075 in, 10 ft L, Operating Temperature: 32 to 140 deg F, PVC, White Charlotte Pipe Pipe, Bell End, 4 in Nominal, 4.215 in OD, 0.075 in Wall Thickness, 10 ft Length, 140 deg F Operating, PVC DWV, White Streamline? copper pipe sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper pipe products to support most all plumbing supply and DWV applications, Streamline? copper pipe is available in all common types including K-type, L-type, M-type and DWV. Each piece of pipe is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper pipe the preferred and specified brand of industry professionals.