Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PIPE FITTINGS > BRASS COMPRESSION FITTINGS
Choose a sub category:
BRASS COMPRESSION SLEEVES BRASS COMPRESSION UNIONS BRASS COMPRESSION INSERTS
BRASS COMPRESSION CAPS BRASS COMPRESSION NUTS BRASS COMPRESSION ADAPTERS
BRASS COMP MALE CONNECTORS BRASS COMP FEMALE CONNECTORS BRASS COMPRESSION TEES
BRASS COMPRESSION ELBOWS
Sort By:
Page of 2
Anderson Metals P60P Tube Sleeve Anderson Metals P60P Tube Sleeve Anderson Metal 730561-05 Brass Compression Fitting
Use with copper, brass, aluminum or plastic tubing. -65 to 250 deg F temperature range. For ID copper tube size, reduce OD size by 1/8 in. Easy to disassemble, no flaring tool required. Use with copper, brass, aluminum or plastic tubing. -65 to 250 deg F temperature range. For ID copper tube size, reduce OD size by 1/8 in. Easy to disassemble, no flaring tool required. Use with copper, brass, aluminum or plastic tubing. For primary use with water, gasoline, oil and vacuum lines.
Anderson Metals P60P Tube Sleeve Anderson Metal 730561-08 Brass Compression Fitting Anderson Metal 730561-04 Brass Compression Fitting
Use with copper, brass, aluminum or plastic tubing. -65 to 250 deg F temperature range. For ID copper tube size, reduce OD size by 1/8 in. Easy to disassemble, no flaring tool required. Use with copper, brass, aluminum or plastic tubing. For primary use with water, gasoline, oil and vacuum lines. Use with copper, brass, aluminum or plastic tubing. For primary use with water, gasoline, oil and vacuum lines.
Anderson Metals PLF 760 Compression Sleeve Anderson Metals PLF 760 Compression Sleeve Anderson Metals PLL 760 Compression Sleeve
Anderson Metals Pipe Sleeve, Nominal Size: 1/4 in, Compression Connection, 300 psi, Operating Temperature: -65 to 250 deg F, Brass, Suitable for: Aluminum, Brass, Copper and Plastic Tubing Anderson Metals Pipe Sleeve, Nominal Size: 3/16 in, Compression Connection, 400 psi, Brass, Suitable for: Aluminum, Brass, Copper and Plastic Tubing Anderson Metals Pipe Sleeve, Nominal Size: 3/8 in, Compression Connection, 200 psi, Operating Temperature: -65 to 250 deg F, Brass, Suitable for: Aluminum, Brass, Copper and Plastic Tubing
Anderson Metals PLL 760 Compression Sleeve BRASS INSERT/DELRIN SLEEVE 1/4 Anderson Metal 730561-10 Brass Compression Fitting
Use with copper, brass, aluminum or plastic tubing. For primary use with water, gasoline, oil and vacuum lines. Use with copper, brass, aluminum or plastic tubing. For primary use with water, gasoline, oil and vacuum lines. Use with copper, brass, aluminum or plastic tubing. For primary use with water, gasoline, oil and vacuum lines.
BRASS INSERT/DELRIN SLEEVE 3/8 COMPRESSION SLVE/INSERT 5/16IN Anderson Metal 730561-06 Brass Compression Adapter Insert
Use with copper, brass, aluminum or plastic tubing. For primary use with water, gasoline, oil and vacuum lines. Anderson Metals Compression Stiffener and Sleeve, Nominal Size: 5/16 in Use with copper, brass, aluminum or plastic tubing. For primary use with water, gasoline, oil and vacuum lines.
Anderson Metals 50868-0402 Tube Adapter COMPRESSION SLEEVE/INSRT 1/2IN Anderson 750066-0302 3-Piece Reducing Tubing Coupling
Anderson Metals Pipe Adapter, Nominal Size: 1/4 x 1/8 in, Compression x MPT Connection, Brass, Suitable for: Plastic Tubing Anderson Metals Compression Stiffener and Sleeve, Nominal Size: 1/2 in, Suitable for: 1/2 in OD Plastic Tube Three-piece construction, nut, sleeve and body. Use with copper, brass, aluminum or plastic tubing. -65 to 250 deg F temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil and vacuum lines. UPC individually bagged.
Anderson Metal 750068-0602 Brass Fitting Anderson Metals 730061-10 Compression Nut Anderson Metal 750068-0406 Brass Fittings
Three piece construction, nut, sleeve and body with attached insert. Use with copper, brass, aluminum or plastic tubing. -65 to 250 deg F temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil and vacuum lines. Use with copper, brass, aluminum or plastic tubing. For primary use with water, gasoline, oil and vacuum lines. Three piece construction, nut, sleeve and body with attached insert. Use with copper, brass, aluminum or plastic tubing. -65 to 250 deg F temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil and vacuum lines.
Anderson Metal 750097-0604 Brass Flare Adapter Anderson 750066-0606 3-Piece Tubing Coupling Anderson Metal 750097-0806 Brass Adapter
Anderson Metals Tube Adapter, Nominal Size: 1/4 x 3/8 in, Compression Connection, 300 psi, Brass Anderson Metals Pipe Connector, Nominal Size: 3/8 in, Compression x Female Connection, 200 psi, Operating Temperature: -65 to 250 deg F, Brass, Suitable for: Aluminum, Brass, Copper and Plastic Tubing Anderson Metals Tube Adapter, Nominal Size: 1/2 x 3/8 in, Compression Connection, Thread Type: Straight, 200 psi, Brass
Anderson Metals P60P Tube Sleeve Anderson Metal 750065-05 Brass Compression Elbow Anderson Metal 750068-0408 Brass Fittings
Use with copper, brass, aluminum or plastic tubing. -65 to 250 deg F temperature range. For ID copper tube size, reduce OD size by 1/8 in. Easy to disassemble, no flaring tool required. Anderson Metals Tube Union Elbow, Nominal Size: 5/16 in, Angle: 90 deg, 300 psi, Operating Temperature: -65 to 250 deg F, Brass Three piece construction, nut, sleeve and body with attached insert. Use with copper, brass, aluminum or plastic tubing. -65 to 250 deg F temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil and vacuum lines.
Anderson 750066-0406 3-Piece Tubing Coupling Anderson Metal 750068-0812 Brass Fittings Anderson Metals 60P Tube Sleeve
Three-piece construction, nut, sleeve and body. Use with copper, brass, aluminum or plastic tubing. -65 to 250 deg F temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil and vacuum lines. UPC individually bagged. Three piece construction, nut, sleeve and body with attached insert. Use with copper, brass, aluminum or plastic tubing. -65 to 250 deg F temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil and vacuum lines. Use with copper, brass, aluminum or plastic tubing. -65 to 250 deg F temperature range. For ID copper tube size, reduce OD size by 1/8 in. Easy to disassemble, no flaring tool required.
Anderson Metals 60P Tube Sleeve Anderson Metal 750064-08 Brass Compression Tee Anderson Metal 750064-10 Brass Compression Fittings
Use with copper, brass, aluminum or plastic tubing. -65 to 250 deg F temperature range. For ID copper tube size, reduce OD size by 1/8 in. Easy to disassemble, no flaring tool required. Anderson Metals Pipe Tee, Nominal Size: 1/2 in, Compression Connection, 200 psi, Operating Temperature: -65 to 250 deg F, Brass, Suitable for: Aluminum, Brass, Copper and Plastic Tubing UPC individually bagged.
Anderson Metals 60P Tube Sleeve Anderson Metals 750060-14 Compression Sleeve Anderson Metal 730081-04 Brass Compression Cap
Anderson Metals Delrin Sleeve, Nominal Size: 3/8 in, Compression Connection, Temperature Rating: -65 to +250 deg F, Plastic, Suitable for: Copper, Brass, Aluminum or Plastic Tubing Use with copper, brass, aluminum or plastic tubing. For primary use with water, gasoline, oil and vacuum lines. UPC individually bagged.
Anderson Metal 730081-06 Brass Compression Fitting Anderson Metals BG3 Compression Sleeve Anderson Metals 730061-03 Compression Nut
UPC individually bagged. Use with copper, brass, aluminum or plastic tubing. For primary use with water, gasoline, oil and vacuum lines. Use with copper, brass, aluminum or plastic tubing. For primary use with water, gasoline, oil and vacuum lines.
Anderson Metal 750064-14 Brass CompressionTee Anderson 750070-0606 Tube Elbow Anderson Metals BG3 Compression Sleeve
UPC individually bagged. Anderson Metals Tube Elbow, Nominal Size: 3/8 in, Angle: 90 deg, 200 psi, Brass Anderson Metals Pipe Sleeve, Nominal Size: 5/8 in, Compression Connection, 150 psi, Brass, Suitable for: Aluminum, Brass, Copper and Plastic Tubing
Anderson Metals 730061-04 Compression Nut Anderson Metal 750068-0302 Brass Fittings Anderson Metals 730061-05 Compression Nut
Use with copper, brass, aluminum or plastic tubing. For primary use with water, gasoline, oil and vacuum lines. Anderson Metals Pipe Connector, Nominal Size: 3/16 x 1/8 in, Compression x Male Connection, 400 psi, Operating Temperature: -65 to 250 deg F, Brass, Suitable for: Aluminum, Brass, Copper and Plastic Tubing Anderson Metals Nut, Nominal Size: 5/16 in, Compression Connection, Thread Type: Straight, 300 psi, Brass, 5/16 in Dia, Suitable for: Aluminum, Brass, Copper and Plastic Tubing
Anderson Metal 750086-0610 Brass Compression Adapter Anderson Metal 750068-0806 Brass Fittings Anderson 750070-0608 Reducing Tube Elbow
Use with copper, aluminum or plastic tubing for water, gas, oil and vacuum lines in a -65 to 250 deg temperature range. Easy to disassemble, no flaring tool required. UPC individually bagged. Anderson Metals Pipe Connector, Nominal Size: 1/2 x 3/8 in, Compression x Male Connection, 200 psi, Operating Temperature: -65 to 250 deg F, Brass, Suitable for: Aluminum, Brass, Copper and Plastic Tubing Anderson Metals Tube Elbow, Nominal Size: 3/8 x 1/2 in, Angle: 90 deg, 200 psi, Brass
Anderson Metals 730061-06 Compression Nut Anderson Metal 750082-0604 Brass Compression Anderson 750066-0808 3-Piece Tubing Coupling
Use with copper, brass, aluminum or plastic tubing. For primary use with water, gasoline, oil and vacuum lines. Three-piece construction, nut, sleeve and body with attached insert. Use with copper, brass, aluminum or plastic tubing. -65 deg to 250 deg F. temperature range. Easy to disassemble, no flaring tool required. Primarily used for water, gasoline, oil and vacuum lines. UPC individually bagged. Anderson Metals Pipe Connector, Nominal Size: 1/2 in, Compression x Female Connection, 200 psi, Operating Temperature: -65 to 250 deg F, Brass, Suitable for: Aluminum, Brass, Copper and Plastic Tubing
Anderson 750066-0806 3-Piece Reducing Tubing Coupling Anderson Metal 750062-03 Brass Compression Fitting Anderson Metal 730081-08 Brass Compression Cap
Three-piece construction, nut, sleeve and body. Use with copper, brass, aluminum or plastic tubing. -65 to 250 deg F temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil and vacuum lines. UPC individually bagged. Anderson Metals Pipe Union, Nominal Size: 3/16 in, Compression Connection, 400 psi, Operating Temperature: -65 to 250 deg F, Brass, Suitable for: Aluminum, Brass, Copper and Plastic Tubing UPC individually bagged.
Anderson Metal 750082-0806 Brass Compression Anderson Metal 750068-1008 Brass Compression Fittings Anderson Metal 750065-04 Brass Compression Elbow
Three-piece construction, nut, sleeve and body with attached insert. Use with copper, brass, aluminum or plastic tubing. -65 deg to 250 deg F. temperature range. Easy to disassemble, no flaring tool required. Primarily used for water, gasoline, oil and vacuum lines. UPC individually bagged. Anderson Metals Pipe Connector, Nominal Size: 5/8 x 1/2 in, Compression x Male Connection, 150 psi, Operating Temperature: -65 to 250 deg F, Brass, Suitable for: Aluminum, Brass, Copper and Plastic Tubing Anderson Metals Tube Union Elbow, Nominal Size: 1/4 in, Angle: 90 deg, 300 psi, Operating Temperature: -65 to 250 deg F, Brass
Anderson Metal 750082-1006 Brass Compression Union Anderson Metal 750068-1012 Brass Fitting Anderson Metal 750082-1008 Brass Compression Union
Three-piece construction, nut, sleeve and body with attached insert. Use with copper, brass, aluminum or plastic tubing. -65 deg to 250 deg F. temperature range. Easy to disassemble, no flaring tool required. Primarily used for water, gasoline, oil and vacuum lines. UPC individually bagged. Three piece construction, nut, sleeve and body with attached insert. Use with copper, brass, aluminum or plastic tubing. -65 to 250 deg F temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil and vacuum lines. Anderson Metals Reducing Pipe Union, Nominal Size: 1/2 x 5/8 in, Compression Connection, 200 psi, Operating Temperature: -65 to 250 deg F, Brass, 5 in L, Suitable for: Aluminum, Brass, Copper and Plastic Tubing
Anderson Metal 757422-1204 Brass Compression Adapter Anderson Metal 750068-0808 Brass Compression Fittings Anderson Metal 750068-0608 Brass Compression Fittings
UPC individually bagged. Anderson Metals Pipe Connector, Nominal Size: 1/2 in, Compression x Male Connection, 200 psi, Operating Temperature: -65 to 250 deg F, Brass, Suitable for: Aluminum, Brass, Copper and Plastic Tubing Anderson Metals Pipe Connector, Nominal Size: 3/8 x 1/2 in, Compression x Male Connection, 200 psi, Operating Temperature: -65 to 250 deg F, Brass, Suitable for: Aluminum, Brass, Copper and Plastic Tubing
Anderson 750066-1008 3-Piece Tubing Coupling Anderson Metal 750064-04 Brass Compression Fitting Anderson Metal 750064-05 Brass Compression Tee
Anderson Metals Pipe Connector, Nominal Size: 5/8 x 1/2 in, Compression x Female Connection, 150 psi, Operating Temperature: -65 to 250 deg F, Brass, Suitable for: Aluminum, Brass, Copper and Plastic Tubing Anderson Metals Pipe Tee, Nominal Size: 1/4 in, Compression Connection, 300 psi, Operating Temperature: -65 to 250 deg F, Brass, Suitable for: Aluminum, Brass, Copper and Plastic Tubing Anderson Metals Pipe Tee, Nominal Size: 5/16 in, Compression Connection, 300 psi, Operating Temperature: -65 to 250 deg F, Brass, Suitable for: Aluminum, Brass, Copper and Plastic Tubing
Anderson Metal 750065-06 Brass Compression Fitting Anderson Metal 750068-0402 Brass Fitting Anderson 750066-0402 3-Piece Reducing Tubing Coupling
Anderson Metals Tube Union Elbow, Nominal Size: 3/8 in, Angle: 90 deg, 200 psi, Operating Temperature: -65 to 250 deg F, Brass Anderson Metals Pipe Connector, Nominal Size: 1/4 x 1/8 in, Compression x Male Connection, 300 psi, Operating Temperature: -65 to 250 deg F, Brass, Suitable for: Aluminum, Brass, Copper and Plastic Tubing Anderson Metals Pipe Connector, Nominal Size: 1/4 x 1/8 in, Compression x Female Connection, 300 psi, Operating Temperature: -65 to 250 deg F, Brass, Suitable for: Aluminum, Brass, Copper and Plastic Tubing
Anderson Metal 730081-10 Brass Compression Cap Anderson Metal 750068-0502 Brass Fittings Anderson Metal 750062-04 Brass Compression Fittings
UPC individually bagged. Anderson Metals Pipe Connector, Nominal Size: 5/16 x 1/8 in, Compression x Male Connection, 300 psi, Operating Temperature: -65 to 250 deg F, Brass, Suitable for: Aluminum, Brass, Copper and Plastic Tubing Anderson Metals Pipe Union, Nominal Size: 1/4 in, Compression Connection, 300 psi, Operating Temperature: -65 to 250 deg F, Brass, Suitable for: Aluminum, Brass, Copper and Plastic Tubing
Anderson Metals 750061-14 Compression Nut Anderson 750066-1012 3-Piece Tubing Coupling Anderson 750069-0806 Tube Elbow
Use with copper, brass, aluminum or plastic tubing. For primary use with water, gasoline, oil and vacuum lines. Anderson Metals Pipe Connector, Nominal Size: 5/8 x 3/4 in, Compression x Female Connection, 150 psi, Operating Temperature: -65 to 250 deg F, Brass, Suitable for: Aluminum, Brass, Copper and Plastic Tubing Lasco Pipe Elbow, Nominal Size: 1/2 x 3/8 in, Compression x MPT Connection, Wall Thickness: 0.032 in, Angle: 90 deg, 200 psi, Operating Temperature: -65 to 250 deg F, Brass
Anderson Metal 750065-08 Brass Compression Elbow Anderson Metals 730061-08 Compression Nut Anderson Metal 750068-0404 Brass Fitting
Anderson Metals Tube Union Elbow, Nominal Size: 1/2 in, Angle: 90 deg, 200 psi, Operating Temperature: -65 to 250 deg F, Brass Use with copper, brass, aluminum or plastic tubing. For primary use with water, gasoline, oil and vacuum lines. Anderson Metals Pipe Connector, Nominal Size: 1/4 in, Compression x Male Connection, 300 psi, Operating Temperature: -65 to 250 deg F, Brass, Suitable for: Aluminum, Brass, Copper and Plastic Tubing
Anderson Metal 750062-08 Brass Compression Fittings Anderson 750069-0808 Tube Elbow Anderson Metal 50862-04 Brass Compression Union
Anderson Metals Pipe Union, Nominal Size: 1/2 in, Compression Connection, 200 psi, Operating Temperature: -65 to 250 deg F, Brass, Suitable for: Aluminum, Brass, Copper and Plastic Tubing Anderson Metals Tube Elbow, Nominal Size: 1/2 in, Angle: 90 deg, 200 psi, Operating Temperature: -65 to 250 deg F, Brass UPC individually bagged.
Anderson Metal 750068-0504 Brass Fittings Anderson Metal 750068-0604 Brass Fitting Anderson 750066-0504 3-Piece Reducing Tubing Coupling
Anderson Metals Pipe Connector, Nominal Size: 5/16 x 1/4 in, Compression x Male Connection, 300 psi, Operating Temperature: -65 to 250 deg F, Brass, Suitable for: Aluminum, Brass, Copper and Plastic Tubing Anderson Metals Pipe Connector, Nominal Size: 3/8 x 1/4 in, Compression x Male Connection, 200 psi, Operating Temperature: -65 to 250 deg F, Brass, Suitable for: Aluminum, Brass, Copper and Plastic Tubing Three-piece construction, nut, sleeve and body. Use with copper, brass, aluminum or plastic tubing. -65 to 250 deg F temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil and vacuum lines. UPC individually bagged.
Anderson 750066-0404 3-Piece Tubing Coupling Anderson Metal 750069-0402 Brass Fittings Anderson Metal 750064-06 Brass Compression Fittings
Anderson Metals Pipe Connector, Nominal Size: 1/4 in, Compression x Female Connection, 300 psi, Operating Temperature: -65 to 250 deg F, Brass, Suitable for: Aluminum, Brass, Copper and Plastic Tubing Anderson Metals Tube to Pipe Elbow, Nominal Size: 1/4 x 1/8 in, Angle: 90 deg, 300 psi, Operating Temperature: 250 deg F, Brass Anderson Metals Pipe Tee, Nominal Size: 3/8 in, Compression Connection, 200 psi, Operating Temperature: -65 to 250 deg F, Brass, Suitable for: Aluminum, Brass, Copper and Plastic Tubing
Anderson Metal 750065-10 Brass Compression Fittings Anderson 750069-1008 Reducing Tube Elbow Anderson Metal 750062-10 Brass Compression Fittings
Anderson Metals Tube Union Elbow, Nominal Size: 5/8 in, Angle: 90 deg, 150 psi, Operating Temperature: -65 to 250 deg F, Brass Anderson Metals Pipe Reducing Elbow, Nominal Size: 5/8 x 1/2 in, Angle: 90 deg, 150 psi, Operating Temperature: 250 deg F, Brass Anderson Metals Pipe Union, Nominal Size: 5/8 in, Compression Connection, 150 psi, Operating Temperature: -65 to 250 deg F, Brass, Suitable for: Aluminum, Brass, Copper and Plastic Tubing