|
|
|
|
|
|
|
|
|
|
|
|
|
|
For home, auto and marine applications.
|
For home, auto and marine applications.
|
For home, auto and marine applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For home and auto applications.
|
Twin probe circuit tester tests AC/DC voltage from 80 to 250 VAC/VDC. The neon indicator glows when voltage is present and brightens as voltage increases. Offers insulated housing and test leads for safety. Built-in pocket clip for added convenience. Tests DC motors, switches and outlets.
|
These Gardner Bender 30 A battery clamps (2-PK) are coated in highly conductive copper for excellent performance. Each has a color-coded covering on the handle.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacement leads for Gardner Bender meters GMT-12A, GMT-18A. UL recognized. Tough ABS plastic. Flexible cords for easy use.
|
This low voltage tester tests for AC/DC Voltage from 5 to 50 VAC/VDC, 50 to 60 Hz. The indicator glows when voltage is present and brightens as voltage increases. Applications include testing low volt outdoor lighting, low volt control panels, doorbells, alarm systems and automotive 12 VDC and 36 VDC.
|
For testing electric circuits from 90 to 600 volt. Detects presence of power on either AC or DC circuits. Identifies circuit conductors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
These Gardner Bender 10 A battery clamps (2-PK) are coated in highly conductive copper for excellent performance. Each has a color-coded covering on the handle for convenience.
|
This tool cuts copper and aluminum solid or stranded wire. Rotate the cam wheel adjustment to strip appropriate 10 to 24 AWG wire. Holes in the side of the jaws are intended for looping solid wire. Compact tool adjusts quickly to any of eight wire sizes.
|
Slits outer covering of all sizes, both old and new, non-metallic (type NM) sheathed cable.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The patented design of this heavy-duty AC/DC voltage tester allows for convenient single hand testing of outlets when the probes are snapped into the bottom housing of the tester. Just insert the probes into the outlet and if voltage is present the neon indicator will glow.
|
The Stanley 5 in wire stripper/cutter features an adjustable slide stop and hold designed for bending and looping wire and an oil-resistant dipped handle for comfortable grip. For pro and DIY electrical repair. Meets ANSI specifications.
|
The continuity tester is very easy-to-use and is used to test for breaks in non-energized wires or cords. Continuity has a bright 360 deg visual indicator located near the tip along with a flexible lead for ease of use.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Southwire Replacement Blade, Blue, Metal, Suitable for: BX/MC Rotary Cutters
|
The ProSource cable crimper with cushion grip handle can cut and strip wires, crimps ignition terminals. This clamper has easy-to-read wire size markings.
|
Strips UTP and STP cable up to 0.24 in (6.2 mm) OD. Tension release lever, compact design. For use on CAT 3 and CAT 5 cable. Carded.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy-duty 3-way voltage tester tests AC/DC voltage at 120, 240 and 277 V. Individual indicators for each voltage range assures reliability. 24 in test lead is long enough for convenient testing. Unit is both durable and compact. Testing applications include outlets, panels, light fixtures, switches, circuit breakers and more.
|
Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal. The condition of electrical installations can be established when contractors use test equipment. Gardner Bender is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer.
|
Safety is the number one priority on any jobsite. Gardner Bender's testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. The condition of electrical installations can be established when contractors use test equipment. Any test unit that can be used to measure or review an application without coming in contact with a live conductor is a necessity. Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal, the condition of electrical installations can be established when contractors use test equipment. Gardner Bender is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This handy standard receptacle tester features a compact, comfortable, contoured design with neon indicators that display positive indication of circuit status. Compact unit simply plugs into any standard 3-wire/grounded receptacle (110 to 125 VAC circuits) and a succession of yellow and red lights provides indication of circuit status or specifies wiring errors. Lamps reveal 5 common wiring errors including open ground, open neutral, open hot, hot/ground reverse, hot/neutral reverse, as well as correct wiring. Easy to read status chart displayed on both top and bottom of the tester for multiple position viewing. Designed for use on standard outlets and extension cords.
|
Mr. LongArm bulb changers are the smart way to change light bulbs. The spotlight bulb changer attaches to an extension pole and allows the user to remove and replace bulbs quickly and easily, while standing safely on the ground.
|
Heavy cream-like paste. Slides on smoothly and clings throughout the pull. Excellent abrasion protection and cling ability, repels water to some extent. Modified wax base formula dries to a slippery film. Greaseless, non-toxic, will not stain skin, clothing or construction trim, cleans up with soap and hot water. Withstands normal temperature extremes and will not dry out in the container. Remains stable with 3 freeze-thaw cycles. Non-combustible, non-conductive and non-corrosive. Will not damage conduit or insulation. Suitable for fiber-optic wire. Yellow color. In a squeeze bottle. UL listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tests ground fault receptacles by overloading circuit and tripping GFCI. Tests for ground fault interruption, open ground, open neutral, open hot, hot/ground reverse, hot/neutral reverse and correct wiring.
|
Mr. LongArm bulb changers are the smart way to change light bulbs. The floodlight bulb changer attaches to an extension pole and allows the user to remove and replace bulbs quickly and easily, while standing safely on the ground.
|
The locknut wrench has been designed to end frustration. This ideal tool for locknut operation fits the majority of UL locknuts and features a thin profile that makes those normally tight spaces a thing of the past. It can be used to loosen or tighten a locknut by rotating the wrench in the direction of the arrows marked on both ends.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Southwire Receptacle Tester, 120 V Supply
|
This multi-purpose tool can be used to cut, strip, crimp, cut and rethread bolts. Features an ergonomic cushioned handle design, hardened steel cutting blades that provide strength and durability and a wire strip length gauge.
|
The ProSource wire stripper is made of rust-resistant steel with a cushioned vinyl grip. The stripper has easy-to-read wire size markings.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
GB Plier, Cutting Capacity: 1-1/2 in, Jaw Type: Comfortable, High-Leverage, Curved Serrated, Jaw Material: Carbon Steel, Nose Type: Long, Tip Width: 1/4 in, Cushioned Handle, 3-1/2 in L Handle, Handle Color: Red, 6-3/4 in OAL, Cut Material: Aluminum, Brass, Copper, Includes: Cutter and Crimper
|
Testing for voltage to any electrical project is important for your safety. This compact multi-purpose unit makes it easy with a combination voltage probe and continuity tester built into a single unit with a convenient screwdriver tip designed for quick faceplate removal. Its compact size fits easily into a pocket or tool box for retrieval as needed. Use to test outlets, fuses, switches, electronics, extension cords, light fixtures and low voltage lighting circuits.
|
Replacement leads for meters. Tough ABS construction. Flexible cords for easy use. Double insulated with removable caps for safety. Slip resistant and comfortable handling. Universal fit with most meters. CAT3 1000V, 40" length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Drill/tap high-speed steel bit, split point with web thinning. High-quality hex shank to ensure strong connection to drill chuck. Complete hole drilling, tapping and deburring or countersinking in one operation with power drill. Designed to tap up to 10 ga metal. Back taper or deburr or countersink beyond tap to prevent thread damage from over-drilling.
|
Drill/tap high-speed steel bit, split point with web thinning. High-quality hex shank to ensure strong connection to drill chuck. Complete hole drilling, tapping and deburring or countersinking in one operation with power drill. Designed to tap up to 10 ga metal. Back taper or deburr or countersink beyond tap to prevent thread damage from over-drilling.
|
Drill/tap high-speed steel bit, split point with web thinning. High-quality hex shank to ensure strong connection to drill chuck. Complete hole drilling, tapping and deburring or countersinking in one operation with power drill. Designed to tap up to 10 ga metal. Back taper or deburr or countersink beyond tap to prevent thread damage from over-drilling.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Drill/tap high-speed steel bit, split point with web thinning. High-quality hex shank to ensure strong connection to drill chuck. Complete hole drilling, tapping and deburring or countersinking in one operation with power drill. Designed to tap up to 10 ga metal. Back taper or deburr or countersink beyond tap to prevent thread damage from over-drilling.
|
Drill/tap high-speed steel bit, split point with web thinning. High-quality hex shank to ensure strong connection to drill chuck. Complete hole drilling, tapping and deburring or countersinking in one operation with power drill. Designed to tap up to 10 ga metal. Back taper or deburr or countersink beyond tap to prevent thread damage from over-drilling.
|
Drill/tap high-speed steel bit, split point with web thinning. High-quality hex shank to ensure strong connection to drill chuck. Complete hole drilling, tapping and deburring or countersinking in one operation with power drill. Designed to tap up to 10 ga metal. Back taper or deburr or countersink beyond tap to prevent thread damage from over-drilling.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Southwire Old Work Box Tracer, Dimensions: 0.8 in H x 3.3 in W, Includes: Snap-On Adapter
|
These pliers that can be used to strips solid or stranded wire feature a locking mechanism and spring return.
|
Strips solid or stranded wire. Compact, adjusts to eight wire sizes. Hardened spring steel. Looping hole bends, loops wire for termination on screws. Also includes spring return for easy handling.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hand tools are a part of every toolbox. With exclusive features for safety, durability, reliability and life strength, Gardner? Bender hand tools offer excellent performance on every job. Whether you need cutters, crimpers, strippers and pliers. Gardner? Bender has the ideal tool to complete your electrical tool set. These pliers are a excellent multi-use tool with a built-in crimper for making wire connections. They easily cut solid/stranded copper core and aluminum core wire. The built-in crimper is designed to crimp non-insulated, vinyl and nylon insulated, as well as ignition terminals. With a wide array of outstanding features, this is an essential pliers for every toolbox. Forward thinking design concepts ensure product usefulness for generations to come.
|
Curved cutting blade, strips and cuts copper and aluminum wire, solid or stranded, 10 to 22 AWG. Precision ground-stripping stations prevent nicking conductor while stripping. Cuts and rethreads bolt sizes 4-40, 5-40, 6-32, 8-32, 10-24 and 10-32. Pliers nose for pulling and looping wire. Crimps insulated and non-insulated terminals. Crimps coaxial F connectors.
|
Shorter for better access to tight spaces between studs and joists, will drill 2 ft and 4 ft joists. Self-feeding screw point draws bit through all wood types. Replaces special tools such as right angle drills and eliminates multiple steps to cut the hole to size. Overall length 4.5 in (144 mm) weight 0.3 lb. (118 g). 1/4 in hex. Over center single flute design for cleaner holes and less splintering. Marked with bit diameter and catalog number on shank for easy identification. Not for use in wood with nails.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Design makes fast, clean cuts. Cuts flexible, water-tight flexible and PVC conduit 1/2 in to 1 in. Reversible cutting blade, lightweight nylon handles, compact 8 in tool fits neatly in pocket or tool pouch.
|
These wire strippers will work on both solid and stranded wire. The stainless steel construction makes these tools a fan favorite.
|
Model 40141S four-way voltage tester is a handy, pocket size tester that checks live AC voltage from 120 to 480 V and DC voltage from 160 to 600 V in four easy steps. The 40141S is easy to read and features a convenient, compact design.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A non-contact voltage tester serves as a key component in any electrical toolkit, allowing the user to verify the presence of AC voltage prior to working on an electrical installation or during troubleshooting without requiring physical contact with live electrical conductors. The Gardner Bender GVD-3504 Circuit Alert non-contact voltage tester features both audible (beeping) and visual (360 deg flashing red light) indicators to alert the user of the presence of AC voltage from 50 to 600 V. Use to locate breaks in wires and voltage at outlets, circuit breaker panels, light fixtures, switches and motors. Quickly locates the hot terminals in receptacles. Fully insulated probe tip eliminates the risk of contacting live electrical wires. Built-in patented safe test feature ensures tester and batteries are working properly. The unit includes a pocket-clip for secure portability.
|
Convenient pocket size probe allows checking of voltage potential with attached test leads or probes and patented snap-in probe storage is preset to standard wall outlet spacing.
|
Contains 100 anchors, 100 screws and a 1/4 in masonry drill bit. For use in concrete, block, tile and brick. Moisture and chemical resistant, for indoor or outdoor use.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Compact handles on these specially designed stainless steel wire strippers have precision ground cutting blades that allow for fast and easy stripping for 28 to 16 AWG stranded wire.
|
Easy-to-use receptacle tester identifies common wiring errors in 120 VAC outlets plus tests GFCI outlets. Performs seven tests including the GFCI test.
|
Gardner Bender's innovative mini cable snake is an ultra-compact 15 ft fishtape for installing a variety of wire and cable including electrical wire, speaker wire and network cable over short runs inside walls and ceilings.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Wire gauge markings on both sides, cuts, strips and loops wire. Wide handles with cushion ridges designed for comfort. Spring-loaded action returns handles to open position. Narrow nose fits into tight places. Made of hardened steel with precision-ground stripping holes. Black oxide finish. No. 11045 strips solid wire AWG. No. 11046 strips stranded wire.
|
Hand tools are a part of every tool box and with exclusive features for safety, durability, reliability and life strength, Gardner Bender hand tools set an industry standard and provide you with the great performance you've come to expect for every job. Whether you need wire cutters, terminal crimpers, cable strippers or pliers Gardner Bender has the ideal tool to complete your electrical tool set. Our tools are ideal and essential for any wiring project whether it be an automotive application, marine application or for construction.
|
Zenith Coax Crimping Tool, Wire Type: Coaxial Cable, Wire Size: RG6, RG59, Handle Color: Black
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Multi-tool strips and cuts wire from 10 to 22 AWG. Pliers style nose allows pulling and looping wire. Bolt cutter leaves ideal lead thread. Induction hardened cutting edge. Wire crimper for insulated and non-insulated terminals. Meets or exceeds all ANSI standards.
|
The Gardner? Bender GS-355 wire stripper/cutter will cut and strip stranded core wire from 20 to 10 ga or solid core wire from 10 to 18 ga This tool has precision ground cutting edges and a pliers nose for pulling and looping finished wire.
|
Southwire Poly Line, 500 ft Tape Length
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Gardner? Bender GS-361 wire stripper/cutter will cut and strip stranded core wire from 30-16. This tool has precision ground cutting edges and a pliers' nose for pulling and looping finished wire. The laser-etched markings ensure the markings won't rub off after continued use.
|
Wire gauge markings on both sides, cuts, strips and loops wire. Wide handles with cushion ridges designed for comfort. Spring-loaded action returns handles to open position. Narrow nose fits into tight places. Made of hardened steel with precision-ground stripping holes. Black oxide finish. No. 11045 strips solid wire AWG. No. 11046 strips stranded wire.
|
A non-contact voltage tester serves as a key component in any electrical toolkit, allowing the user to verify the presence of AC voltage prior to working on an electrical installation or during troubleshooting without requiring physical contact with live electrical conductors. The Gardner Bender GVD-3505 LiveWire adjustable non-contact voltage detector features an On/Off adjustable sensitivity dial able to detect the presence of AC voltage from as low as 12 V to up to 600 VAC and provides both audible (beeping) and visual (360 deg flashing red light) indicators to alert the user of the presence of voltage. The fully insulated probe tip eliminates the risk of contacting live electrical wires while the patented battery check feature designed into the unit ensures tester and batteries are operating properly, virtually eliminating false negative readings. Applications include testing doorbells, low voltage lighting, security system wires, AC energized wires, outlets, switches, electrical panels and light fixtures. Quickly locates the hot terminals in receptacles. The unit includes a pocket-clip for secure portability. Tester is C/ETL/UL Listed, offers a 150 lb crush rating, Cat III 600 V rating and includes a 1 year warranty.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tempered carbon steel blade and screwdriver.
|
GB Wrench Set, Locknut, Steel, Number of Pieces: 3, Includes: 1/2 in , 3/4 in and 1 in Wrenches
|
For high-leverage. Cuts up to 3/8 in Dia cable. Crimps RG-58, RG-59 and RG-6 F-style connecters. Cushioned grips.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
"Strips insulation from coax cable. 3.87"" height x 1.25"" width x .75"" depth."
|
Electricians demand precision and reliability. That's why they choose CHANNELLOCK? wire strippers. Accurate and easy cuts from a legendary tool maker- CHANNELLOCK?.
|
Ergonomic high leverage grips for maximum torque, molded and insulated shaft rated to 1000 V for protection when working with electricity. Hardened chrome vanadium steel, with magnetic tips. Two-piece set includes SCE-3252 #2 Phillips tip and SCE-3256 3/16 in slotted tip. Carded packing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Take the guesswork out of stripping wire and make it quicker and more precise than ever. Use the Gardner Bender five-in-one multi-purpose tool to cut and strip copper and aluminum wire (solid or stranded) or to crimp insulated terminals, non-insulated terminals and ignition terminals. The adjustable tensioning wheel allows for precise stripping of smaller gauge wire. Use the adjustable strip length gauge to strip the correct length of wire every time. This multi-tool automatic wire stripper is great for almost any job and especially for applications where multiple different wire types and sizes are present. It's reliable and durable. The great addition to any tool box.
|
Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal; the condition of electrical installations can be established when contractors use test equipment. Pocket sized analog tester. Tests voltage, DC voltage, DC current, resistance, continuity and batteries.
|
Shorter for better access to tight spaces between studs and joists, will drill 2 ft and 4 ft joists. Self-feeding screw point draws bit through all wood types. Replaces special tools such as right angle drills and eliminates multiple steps to cut the hole to size. Overall length 4.5 in (144 mm) weight 0.3 lb. (118 g). 1/4 in hex. Over center single flute design for cleaner holes and less splintering. Marked with bit diameter and catalog number on shank for easy identification. Not for use in wood with nails.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
GB Electrician's Screw Kit, Thread Size: #8-32, Head Type: Round, Drive Type: Phillips, Package Quantity: 5 lb, Silver, Includes: (20) 2/3 in, (20) 7/8 in, (20) 1 in, (20) 1-1/4 in, (20) 1-5/8 in, (20) 2 in Phillips Head Screws
|
Southwire Fish Tape, Tape Profile: Flat, Steel Tape Material, 25 ft Tape Length, 1/8 in Tape, Dimensions: 8-1/2 in H x 7 in W x 1 in D
|
60010S test lead kit includes universal replacement leads for all Southwire meters except for the 10010S analog multimeter.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Southwire Adapter Kit, Dimensions: 3.94 in H x 1.1 in W x 3.15 in D, Includes: Light Bulb Socket Adapter and Alligator Clip Adapter
|
Southwire NCV Detector, Measuring Functions: AC Voltage, Measuring Range: 100 to 600 VAC, Display Type: LED, Power Source: Battery, Temperature Rating: 32 to 104 deg F, Dimensions: 6.23 x 0.83 x 0.99 in
|
Southwire Alligator Clip Kit, 0.8 in Jaw Opening, 1000 V, 1.81 in Length, 3.46 in Width
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plier nose for pulling and looping wire. Scissor-type cutting blade. Ergonomic-shaped handles. Cuts and strips both solid and stranded wire. Spring automatically spreads handles. Slide lock. Wire sizes embossed in metal. Dimensions 6 in/152 mm, minimum/maximum strip AWG 20 to 10, 0.8 to 2.6 mm.
|
Gardner Bender's GUSB-3450 USB multimeter is used to confirm USB port voltage and current and check chargers, cables and USB ports. The tester features a high-impact housing and a pocket clip. Measure current draw, measure performance of solar USB chargers and test for proper wiring and polarity. The easy to understand display alternates between volts and amps. Features a 1 year warranty.
|
A non-contact voltage tester serves as a key component in any electrical toolkit, allowing the user to verify the presence of AC voltage prior to working on an electrical installation or during troubleshooting without requiring physical contact with live electrical conductors. Engineered to specifications required by professional electricians the Sperry Instruments VD6509 adjustable non-contact voltage detector allows for sensitivity adjustments in multiple-wire applications when precision and safety are crucial. This unit features an adjustable sensitivity dial able to detect the presence of AC Voltage from as low as 12 V to up to 1000 V AC and provides both audible (beeping) and visual (360 deg flashing red light) indicators to alert the user of the presence of voltage. It also includes a built-in flashlight. The fully insulated probe tip eliminates the risk of contacting live electrical wires while the patented battery check feature designed into the unit ensures tester and batteries are operating properly, virtually eliminating false negative readings. This unit features 250 lb crush rated impact-resistant ABS housing to withstand tough worksite applications while the design ensures a positive user experience over long hours of repeated use. Applications include testing doorbells, low voltage lighting, security system wires, AC energized wires, quickly locating hot terminals in receptacles, pinpointing breaks in wires and detecting the absence/presence of voltage at outlets, circuit breaker panels, light fixtures, switches and motors. The unit includes a pocket-clip for secure portability. Tester is cETLus Listed, CE Certified, CAT III 1000V/IV 600 V rated and includes a limited lifetime warranty. Operates from a single AAA battery (included). Frequency 50 to 60 Hz.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bussmann cartridge fuse pullers are heavy-duty tools for safely removing fuses from their blocks.
|
Contains assorted sizes and lengths of commonly used electrical screws. Screws are #6 to 32, ranging from 3/4 to 3in L.
|
Made from durable heat-treated steel, the S1020SOL-US is equipped to withstand any jobsite. It strips and cuts up to 10 to 20 AWG solid and 12 to 22 AWG solid wire. These wire strippers are made for the professional. Our tradesmen and women meet every job with heart and pride. Their tools should, too.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This wire stripper/cutter features six stripping holes and a shear-cutting knife to handle 8 to 18 AWG solid and 10 to 20 AWG stranded wire, plus shearing holes for 6 to 32 and 8 to 32 bolts. Longer hand grip coverage provides a more comfortable grip while the updated lock tucks nicely out of the way. The narrow head design allows this tool to easily get into tight places.
|
Milwaukee? 6 in 1 combination pliers feature a revolutionary, forged dual head design for wire stripping and needle nose functionality. A unique reaming design is integrated into the pliers head for smoothing out rough edges of metal pipe and a curved blade design allows for clean cuts through larger wire sizes. These pliers have the capability to cut #6 and #8 bolts and feature a swing-lock design for fast one-handed operation and won't open when stored in a pouch or backpack. Milwaukee? 6-in-1 combination pliers deliver maximum productivity for the trades. The Milwaukee? 48-22-3079 is ideal for the toughest of jobsites. Milwaukee? stands behind their product and offers a limited lifetime warranty with all combination pliers.
|
When you're ready to add a multimeter to your toolbox this unit is a great place to start. This tester is designed to work on most household appliances and is equipped with an easy to read 3-1/2 in digital display and three testing functions - AC voltage to 500 V, DC voltage to 600 V and resistance to 2 mOhm. The 11 position manual ranging smooth rotary style achieves precise readings and the low battery indicator ensures an accurate read-out. Durable housing is drop-resistant to 3 ft and crush-rated to 150 lb. Tester is rated Cat III 600 V. Unit comes pre-packaged with secure-fitting 26 in test leads and operating instructions.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This indispensable household tester kit includes the most commonly used testers to test voltage, GFCI receptacles, batteries and USB ports. The voltage tester allows the user to verify the presence of AC voltage prior to working on an electrical installation or during troubleshooting without requiring physical contact with live electrical conductors. The included GFCI receptacle tester detects common wiring problems in standard and GFCI protected outlets. Simply plug it in and view the light pattern on the tester to determine if it's correct, open ground, open neutral, open hot, hot/ground reverse or hot/neutral reverse. Tester works on 110 to 125 VAC receptacles only and will not indicate quality of ground. The battery tester tests common household battery types (AA, AAA, C, D and 9 V batteries) to determine existing charge. Finally, the USB tester can check USB ports for the presence of voltage and test for proper wiring and polarity. Simply plug it into a USB port and the indicator bulb will glow a certain color to tell you the condition of the USB port.
|
For telecom and electrical applications. Strong, tough tempered steel with nickel-plated finish. Upper blade has notches for stripping 19 AWG and 23 AWG wire. Scraper and file on outside of both blades. Serrated lower blade reduces slippage. 5-1/4 in length, 0.20 lb.
|
Gardner Bender Ugly's Electrical References Revised 2017 Edition is a helpful guide for the professional electrician and electrical minded weekend warrior. The book includes common mathematical formulas and specific rules and regulations from the National Electric Code. The easy to understand format makes it an ideal resource for double checking commonly used equations. Keep on hand as a quick reference for on the job applications.
|
|
|
