Home > ELECTRICAL > ROUGH ELECTRICAL > ELECTRICAL BOXES & COVERS > NON METAL ELECTRICAL BOXES
Sort By:
Page of 1
Thomas & Betts B118A Switch Box Thomas & Betts B120A-UPC Switch Box Thomas & Betts B122A-UPC Wall Box
With captive nails. Four integral clamps, two each end. Meets NEMA OS-2, UL listed, classified for fire wall assemblies. With captive nails. Four integral clamps, two each end. Meets NEMA OS-2, UL listed, classified for fire wall assemblies. With captive nails. Four integral clamps, two each end. Meets NEMA OS-2, UL listed, classified for fire wall assemblies.
Allied Moulded 1098-N Switch Box Allied Moulded 1099-N Switch Box Thomas & Betts BH122A-UPC Outlet Box
Thermoset fiberglass with angled mid-nails. Nails are installed as fastening devices. 2 hrs wall and ceiling fire rating. Lightweight, non-corrosive, non-conductive, no ground required. Will not melt or distort in high heat. Shatter-resistant in cold temperatures. UL listed. Thermoset fiberglass with angled mid-nails. Nails are installed as fastening devices. 2 hrs wall and ceiling fire rating. Lightweight, non-corrosive, non-conductive, no ground required. Will not melt or distort in high heat. Shatter-resistant in cold temperatures. UL listed. Lightweight design and durable plastic. Listed for masonry walls. Safe to install and will never rust or corrode. Includes nails for quick, easy installation. 22 cu-in rigid wall. 3-7/8 in x 2-3/8 in x 3-3/4 in. UL listed.
Thomas & Betts B108B-UPC Outlet Box Thomas & Betts B108R-UPC Outlet Box Carlon B118B-UPC Switch Box
New work applications, shallow PVC switch box. Integral brackets. 1-1/4 in D x 2-3/8 in x 3-5/8 in. UL listed. Designed and listed for use with non-metallic sheathed cable. With mounting ears. Permissible for use with 90 deg C connectors. 8 cu-in capacity. 1-1/4 in x 2-3/8 in x 3-5/8 in. UL listed. Safe, non-conductive. With bracket for 3/8 to 5/8 in wallboard. Steel and wood studs, 4 knockouts. 2-15/16 in D x 3-3/4 in x 2-1/4 in.
Thomas & Betts B114R-UPC Switch Box Thomas & Betts B232A-UPC Outlet Box Raco 7887RAC Old Work Cable Box
Old work wall case. Safe, non-conductive. Two zip-mount retainers. Four integral clamps, two each end, mounting ears. 14 cu-in, 2-3/4 in x 2-1/4 in x 4-1/8 in. UL listed. New work safe, non-conductive. With captive nails. Eight integral clamps, four each side. 32 cu-in. Meets NEMA OS-2, UL listed, classified for fire wall assemblies. 3 in D x 4 in x 3-3/4 in. Plaster ears, old work swing style clips secure box in wall. Integral clamps. Two hour fire rated. Mounting clips. 3 in D. 14 cu-in capacity. UL listed.
BOX PVC SNGL GANG GRAY 8CU IN DEVICE BOX PVC 1 GANG 18.5CUIN BOX PVC SNGL GANG GRAY 18CU IN
GB Switch/Outlet Box, Outlet Type: Shallow, Cable Entry: Hinge, Number of Gangs: 1, Rectangular, Cubic Capacity: 8 cu-in, Dimensions: 1.25 in H x 2.4 in W x 4.25 in D, PVC, Gray, In-Wall Mounting, Suitable for: Non-Metallic Sheathed Cable and Non-Metallic Raceway, Includes: Mounting Ears/Flanges and Adjustable Mounting Tabs Smart Box Device Box, 4 Knockouts, 1/2 in Knockout, 1 Gangs, 18.5 cu-in, Dimensions: 3-3/4 in H x 2-1/4 in W x 3-1/2 in D, PVC, Gray, Screw Mounting GB Switch/Outlet Box, Outlet Type: Standard, Cable Entry: Knockout, Number of Knockouts: 4, Number of Gangs: 1, Rectangular, Cubic Capacity: 18 cu-in, Dimensions: 3.625 in H x 2.3125 in W x 2.75 in D, PVC, Gray, In-Wall, Nail Mounting, Suitable for: Non-Metallic Sheathed Cable and Non-Metallic Raceway, Includes: Captive Nails
BOX PVC SNGL GANG GRAY 14CU IN BOX PVC SNGL GANG GRAY 20CU IN Carlon Flex-Plus A58381D-CAR ENT Flexible Raceway Switch Box
GB Switch/Outlet Box, Outlet Type: Standard, Cable Entry: Hinge, Number of Knockouts: 4, Number of Gangs: 1, Rectangular, Cubic Capacity: 14 cu-in, Dimensions: 4.38 in H x 2.25 in W x 2.75 in D, PVC, Gray, In-Wall Mounting, Suitable for: Non-Metallic Sheathed Cable and Non-Metallic Raceway, Includes: Mounting Ears/Flanges and Adjustable Mounting Tabs GB Switch/Outlet Box, Outlet Type: Standard, Cable Entry: Knockout, Number of Knockouts: 4, Number of Gangs: 1, Rectangular, Cubic Capacity: 20 cu-in, Dimensions: 3.3 in H x 2.4 in W x 4.2 in D, PVC, Gray, In-Wall, Nail Mounting, Suitable for: Non-Metallic Sheathed Cable and Non-Metallic Raceway, Includes: Captive Nails Non-metallic, non-conductive. Punch type knockout. Quickly connects. Square, fits commercial and residential requirements. For 600 V use in ceilings, floors and walls in commercial, industrial and residential buildings not more than three floors above grade. Colored in brilliant electric blue. 3 in x 2-1/4 in x 3 in. UL listed.
DEVICE BOX HORZ 1GANG 22.5CUIN BOX PVC DBL GANG GRAY 25CU IN Carlon Flex-Plus A58381E-CAR ENT Flexible Raceway Switch Box
The original smart boxes are unmatched in versatility in new work locations where you cannot swing a hammer or where final wall surfaces are uncertain, like kitchens and baths. Interior mounting screws allow for depth adjustability to accommodate tile, paneling and other specialty wall treatments. Smart boxes are unmatched in both new or old work applications because they are always mounted to a stud. GB Switch/Outlet Box, Outlet Type: Standard, Cable Entry: Knockout, Number of Knockouts: 6, Number of Gangs: 2, Rectangular, Cubic Capacity: 25 cu-in, Dimensions: 4-3/8 in H x 4 in W x 2-3/4 in D, PVC, Gray, In-Wall Mounting, Suitable for: Non-Metallic Sheathed Cable and Non-Metallic Raceway, Includes: Mounting Ears/Flanges and Adjustable Mounting Tabs Non-metallic, non-conductive. Punch type knockout. Quickly connects. Square, fits commercial and residential requirements. For 600 V use in ceilings, floors and walls in commercial, industrial and residential buildings not more than three floors above grade. Colored in brilliant electric blue. 3 in x 2-1/4 in x 1-7/8 in. UL listed.
DEVICE BOX PVC 1 GANG 22.5CUIN Thomas & Betts BH235A Outlet Box Thomas & Betts B120R Outlet Box
Unmatched in adjustability. Molded entirely of 1 piece with no moving parts to break or lose. Step down feature allows for wire entrance in both top and bottom of box. Mounts to wood or metal stud 25 g. Extra thick PVC wall material creates stability and rigidity. Built-in wire clamps. All 6/32 device holes are threaded. PVC handy box used for many wiring applications. Weather-resistant and non-conductive. Will accept metal handy box covers or non-metallic covers. 35 cu-in rigid wall. With mounting ears and swing bracket. 4 integral clamps, 2 each end. UL listed, meets NEMA OS-2. Suitable for masonry walls, not UL Classified for Fire Resistance. PVC construction. 20 cu-in capacity. 3-5/8 in D x 2-5/16 in x 4-1/8 in.
BOX PVC DBL GANG GRAY 32CU IN Allied Moulded 2300-NK Switch Box Allied Moulded 9361-ESK Old Work Switch Box
GB Switch/Outlet Box, Outlet Type: Standard, Cable Entry: Hinge, Number of Knockouts: 8, Number of Gangs: 2, Square, Cubic Capacity: 32 cu-in, Dimensions: 3-5/8 in H x 4 in W x 3 in D, PVC, Gray, In-Wall, Nail Mounting, Suitable for: Non-Metallic Sheathed Cable and Non-Metallic Raceway, Includes: Captive Nails Thermoset fiberglass with angled mid-nails, speed clamps. Lightweight, non-corrosive, non-conductive, no ground required. Will not melt or distort in high heat. Shatter-resistant in cold temperatures. 2 hrs wall fire rating. 3 in x 4 in x 3-3/4 in. UL listed. fiberglassBOX Switch/Outlet Box, Knockout Cable Entry, 2 Outlets, 4 Knockouts, 1 Gangs, Rectangular Shape, 16 cu-in, Dimensions: 3-1/4 in H x 2-3/8 in W x 2-7/8 in D, Fiberglass/Polyester, Off-White, Bracket Mounting
Raco 7488RAC Old Work Cable Box Allied Moulded 9363-EWK Old Work Switch Box Thomas & Betts B121ADJ Wall Box
Old work PVC box. With swing clips and integral clamps to hold securely. 3-5/32 in D. 25 cu-in capacity. Thermoset fiberglass with ears, wing brackets, speed clamps. 2 hrs wall and ceiling fire rating. Lightweight, non-corrosive, non-conductive, no ground required. Will not melt or distort in high heat. Shatter-resistant in cold temperatures. 2-7/8 in x 2-3/8 x 3-1/4. UL listed. Provides simple installation and allows adjustment from 0 to 1-3/4 in with the turn of a screw. Clip the included bracket onto any stud, mounts square and secure every time. Securing the bracket to the stud ensures that the box will not move. Comes preset at 1/2 in. 3-3/8 in D x 3-7/8 in x 3-3/4 in. Permissible for use with 90 deg C connectors. Satisfies NEC 370-20. UL listed 5Z74 and classified 2 Hr W/C.
Thomas & Betts B225R-UPC Outlet Box Thomas & Betts B344AB-UPC Outlet Box Carlon A122 ENT Flexible Raceway Outlet Box
With mounting ears and 2 swing clamps. Suitable for masonry walls, UL listed, not UL Classified for fire resistance. 2-3/4 in D x 3-1/8 in x 3-15/16 in. With captive nails and bracket support, twelve integral clamps, six each side. 44 cu-in capacity, 2-11/16 in D x 3-3/4 in x 5-5/8 in. Meets NEMA OS-2, UL listed, classified for fire wall assemblies. Eccentric knockouts, non-metallic and non-conductive. Can be mounted to wood or steel studs. 3.53 in H x 2.10 in W x 3-1/4 in D.
Sliderbox SB Adjustable Switch/Receptacle Outlet Box DEVICE BOX PVC 2 GANG 38CUIN DEVICE BOX PVC 3 GANG 57CUIN
Molded of engineering grade non-metallic thermoplastic. Adjustable, no need to remove or relocate mounting screws to re-position the box. Slots retain slider plate and guide it in a straight motion. Internal rails guide slider plate for smooth mounting adjustability in wall substrates from 1/2 in to 1-3/8 in thick and ceiling substrates from 1/2 in to 1-5/32 in. Square corner design allows easy wall cut-in (Old work applications). Molded spline device holes for quick device screw installation. 23 cu-in volume, 1/2 in knockout. Internal steel, stud/wood screws. 3-9/16 in D x 2-1/4 in W x 3-3/4 in H. UL listed for 2 hrs fire resistive walls and ceilings. Unmatched in adjustability. Molded entirely of 1 piece with no moving parts to break or lose. Step down feature allows for wire entrance in both top and bottom of box. Mounts to wood or metal stud 25 g. Extra thick PVC wall material creates stability and rigidity. Built-in wire clamps. All 6/32 device holes are threaded. Smart Box Device Box, 3 Gangs, 57 cu-in, Dimensions: 3-3/4 in H x 6 in W x 7 in D, PVC, Gray, Screw Mounting
DEVICE BOX MMNT 1 GANG 21CUIN Carlon Super Blue BH118R Old Work Outlet Box Thomas & Betts BH353A Lightweight Outlet Box
Romex Multi-Mount Outlet Box, Conduit Cable Entry, 4 Knockouts, 1/2 in Knockout, 1 Gangs, Rectangular Shape, 21 cu-in, Dimensions: 3.82 in H x 2.4 in W x 3.5 in D, Polycarbonate, Gray, Wall Mounting Lightweight, noncorrosive and nonconductive, rigid, non-metallic wiring box combines features of hard shell thermoset box and thermoplastic PVC style box. Molded of specially formulated, strong thermoplastic material, will not crack or break, even in extreme environments. Resists flexing and holds shape even under the worst conditions. Provides large wirefill capacity and comes with molded-in nailing flanges and molded-in swing clamps to make installation faster. Designed to nest inside one another to take up less shelf space and are easier to transport to job sites. 3.85 in x 2.41 in. UL listed. Lightweight design and durable plastic. Safe to install and will never rust or corrode. Includes hardware for easy installation. Rigid wall box.
Allied Moulded 3300-NK Outlet Box Thomas & Betts SC200DV Dual Voltage Outlet Box Raco 2011FBAR Vapor Barrier Box
Thermoset fiberglass with angled mid-nails, speed clamps. Lightweight, non-corrosive, non-conductive, no ground required. Will not melt or distort in high heat. Shatter-resistant in cold temperatures. 2 hrs wall fire rating. 3 in x 5-11/16 in x 3-3/4 in. UL listed. Enables line voltage and low-voltage to run to the same location. Uses standard 2-gang faceplate. Backless design accommodates large/deep low voltage devices. 3.69 in x 4.04 in. 20.5 cu-in capacity. UL approved. Made from rugged polycarbonate material, yellow color, gasket seals all openings to prevent air or vapor penetration. Front-mounted ground screw, 1/2 in setback, flush bracket. Self-clamping, nonmetallic sheathed cable entry tabs.
Sliderbox SB Adjustable Switch/Receptacle Outlet Box Allied Moulded 9312-EWK Old Work Outlet Box BOX EXTENDER N-METALLIC 1GANG
Molded of engineering grade non-metallic thermoplastic. Adjustable, no need to remove or relocate mounting screws to re-position the box. Slots retain slider plate and guide it in a straight motion. Internal rails guide slider plate for smooth mounting adjustability in wall substrates from 1/2 in to 1-3/8 in thick and ceiling substrates from 1/2 in to 1-5/32 in. Square corner design allows easy wall cut-in (Old work applications). Molded spline device holes for quick device screw installation. 42 cu-in volume, two 1/2 in knockouts. Internal steel, stud/wood screws. 3-9/16 in D x 4 in W x 3-3/4 in H. UL listed for 2 hrs fire resistive walls. Thermoset fiberglass with ears, wing brackets and speed clamps. Lightweight, non-corrosive, non-conductive, no ground required. Will not melt or distort in high heat. Shatter-resistant in cold temperatures. 2-3/4 in x 4-1/8 in x 3-1/4 in. 2 hrs wall fire rating. UL listed. Extends an existing box by 1-1/8 in. Used to correct problems from remodeling where the wall surface is extended. Fits between the wiring device and the wall surface. Extends the switch or outlet box to flush with the wall. Works with all standard wiring devices. 2-1/4 in x 3-1/4 in. UL listed.
Carlon A238 ENT Flexible Raceway Outlet Box Carlon Super Blue BH234R Old Work Outlet Box Thomas & Betts B234ADJ Wall Box
Combination two-gang/four square box. Eccentric knockouts, non-metallic and non-conductive. Lightweight, noncorrosive and nonconductive, rigid, non-metallic wiring box combines features of hard shell thermoset box and thermoplastic PVC style box. Molded of specially formulated, strong thermoplastic material, will not crack or break, even in extreme environments. Resists flexing and holds shape even under the worst conditions. Provides large wirefill capacity and comes with molded-in nailing flanges and molded-in swing clamps to make installation faster. Designed to nest inside one another to take up less shelf space and are easier to transport to job sites. 3.85 in x 4.17 in. UL listed. Patented design provides simple, goof-proof installation and allows the installer to adjust the box to any thickness with the turn of a screw. Clip the included bracket onto any stud, mounts square and secure every time. Securing the bracket to the stud ensures that the box will not move. Comes preset at 1/2 in. 3 in D x 5-5/8 in x 3-5/8 in. Satisfies NEC 370-20. UL listed 5Z74 and classified 2 hr W/C.
Thomas & Betts B355R Outlet Box Allied Moulded 9313-EWK Old Work Switch Box Carlon B455A-UPC Outlet Box
Extra large box. 6 clamps to hold cable, swing out clamps to hold to the wall. Engraved with NEC approved conductor fill. 13 in x 6-1/4 in x 8 in. UL listed. Thermoset fiberglass with ears, wing brackets, speed clamps. Lightweight, non-corrosive, non-conductive, no ground required. Will not melt or distort in high heat. Shatter-resistant in cold temperatures. 2 hrs wall fire rating. 2-7/8 in x 5-15/16 in x 3-1/4 in. UL listed. Safe, non-metallic, non-conductive. Molded instructions. 12 integral clamps, 6 each side. Bracket and captive nails included. 2-1/2 in D x 3-7/10 in x 7-3/5 in.
DEVICE BOX MMNT 2 GANG 37CUIN Thomas & Betts BH464A Rigid Outlet Box DEVICE BOX PVC 4 GANG 74CUIN
Romex Multi-Mount Outlet Box, Conduit Cable Entry, 1 Knockouts, 1/2 in Knockout, 2 Gangs, Rectangular Shape, Dimensions: 3.6 in H x 4.8 in W, Polycarbonate, Gray, Wall Mounting Rigid wall box. Lightweight design and durable plastic. Safe to install and will never rust or corrode. Allows for large wiring devices (GFIs and dimmers). Includes hardware for easy installation. Smart Box Device Box, 4 Gangs, 74 cu-in, Dimensions: 3-3/4 in H x 7-3/4 in W x 9 in D, PVC, Gray, Screw Mounting
Carlon B468R Old Work Outlet Box DEVICE BOX MMNT 3 GANG 55CUIN DEVICE BOX MMNT 4 GANG 67CUIN
Workbox can accommodate three and four large wiring devices. Installs easily for existing construction remodeling work. 8 clamps securely hold cable. Swing out clamps lock box securely to wall. Lightweight and durable and engraved with NEC approved conductor fill. Suitable for masonry walls. 68 cu-in capacity and measures 3.41 in x 7.57 in x 2.89 in. Romex Multi-Mount Box, 55 cu-in, 3 Gangs, 1/2 in Knockout, Polycarbonate, Dimensions: 3.4 in H x 4.4 in W x 7.5 in D Romex Multi-Mount Outlet Box, Conduit Cable Entry, 2 Knockouts, 1/2 in Knockout, 4 Gangs, Rectangular Shape, 67 cu-in, Dimensions: 3.5 in H x 4.3 in W x 9.6 in D, Polycarbonate, Gray, Wall Mounting
DEVICE BOX MMNT 5GANG 91.5CUIN DEVICE BOX MMNT 6 GANG 110CUIN
Madison Electric Multi-Mount Box, 5 Gangs, Polycarbonate, Gray, 3-1/2 in Length, 9.52 in Width, 3.82 in Height, In-Wall Mounting Romex Multi-Mount Outlet Box, Conduit Cable Entry, 16 Knockouts, 1/2 in Knockout, 6 Gangs, Rectangular Shape, 110 cu-in, Dimensions: 3.5 in H x 3.8 in W x 12.5 in D, Polycarbonate, Gray, Wall Mounting