|
|
|
|
|
|
|
|
|
|
|
Ideal for setting nails into materials; long length for setting nails in hard-to-reach areas; fully hardened, precision-milled steel for long life; long, beveled tip for easy nail head alignment; square head prevents rolling when set down.
|
Ideal for setting nails into materials. Long length for setting nails in hard-to-reach areas. Fully hardened, precision-milled steel for long life. Long, beveled tip for easy nail head alignment. Square head prevents rolling when set down.
|
Ideal for setting nails into materials. Long length for setting nails in hard-to-reach areas. Fully hardened, precision-milled steel for long life. Long, beveled tip for easy nail head alignment. Square head prevents rolling when set down.
|
|
|
|
|
|
|
|
|
|
|
|
|
Ideal for setting nails into materials. Long length for setting nails in hard-to-reach areas. Fully hardened, precision-milled steel for long life. Long, beveled tip for easy nail head alignment. Square head prevents rolling when set down.
|
Stanley Pin Punch, 3/16 in Tip, Shank Type: Hex, Shank Diameter: 1/4 in, Chrome Vanadium Steel, Powder-Coated, 6 in L
|
Made of fully hardened, precision-milled steel with long, beveled tip for easy nail head alignment, grip is slip-resistant and ribbed to absorb shock, improving precision. Long length enables user to set nails in hard-to-reach areas.
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of fully hardened, precision-milled steel with long, beveled tip for easy nail head alignment, grip is slip-resistant and ribbed to absorb shock, improving precision. Long length enables user to set nails in hard-to-reach areas.
|
Made of fully hardened, precision-milled steel with long, beveled tip for easy nail head alignment, grip is slip-resistant and ribbed to absorb shock, improving precision. Long length enables user to set nails in hard-to-reach areas.
|
The Vulcan center punch is made from drop forged, heat treated chrome alloy steel material with baked enamel finish and heavy duty hex shank.
|
|
|
|
|
|
|
|
|
|
|
|
|
The Vulcan center punch is made from drop forged, heat treated chrome alloy steel material with baked enamel finish and heavy duty hex shank.
|
The Vulcan center punch is made from drop forged, heat treated chrome alloy steel material with baked enamel finish and heavy duty hex shank.
|
The Vulcan center punch is made from drop forged, heat treated chrome alloy steel material with baked enamel finish and heavy duty hex shank.
|
|
|
|
|
|
|
|
|
|
|
|
|
Stanley Pin Punch, 1/16 in Tip, Shank Type: Hex, Shank Diameter: 1/4 in, Chrome Vanadium Steel, Powder-Coated, 6 in L
|
Used to cut or shape wrought iron, cast Iron, steel, brass, bronze, copper, aluminum, nuts and rivets.
|
Hardened steel pin, knurled body provides no-slip grip, auto-centering and countersunk end. Used for creating starter screw holes.
|
|
|
|
|
|
|
|
|
|
|
|
|
Machined to exacting standards from heat-treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys, after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
|
Made of heat-treated high carbon American steel. Features precision ground point for marking accurate hole starting easier. Use on metals softer than their point.
|
Made of heat-treated high carbon tough American steel that's polished and tapered. Used for marking scribe work pieces and layout work, these sharp polished points aid in accuracy. Use on metals softer than their points.
|
|
|
|
|
|
|
|
|
|
|
|
|
The Vulcan pry bar is made from dropped forged steel. It has a matte black finish and the nail slots at both ends offer easy accessibility and leverage.
|
The wonder bar is constructed from forged carbon steel which provides durability and strength. The bar is ideal for removing nails, lifting and prying objects. Beveled cutting edges and nail slots for quality performance.
|
Made of heat-treated high carbon American steel. Features precision ground point for marking accurate hole starting easier. Use on metals softer than their point.
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of heat-treated high carbon tough American steel that's polished and tapered. Used for marking scribe work pieces and layout work, these sharp polished points aid in accuracy. Use on metals softer than their points.
|
The alloy steel blade runs through the length of the handle and is also securely fastened to the steel ferrule. Withstands heavy-pressure and tough workloads. Great for scribing, perforating, punching and aligning holes.
|
Vaughan Mini Bar, Steel, Powder-Coated, 5-1/2 in L
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of heat-treated high carbon tough American steel that's polished and tapered. Used for marking scribe work pieces and layout work, these sharp polished points aid in accuracy. Use on metals softer than their points.
|
Cold chisel is ground for cutting, shaping and removing metal that is softer than the cutting edge. The blade and handle are made of chrome alloy steel with 3/8 in tip and 5-1/2 L.
|
Cold chisel is ground for cutting, shaping and removing metal that is softer than the cutting edge. The blade and handle are made of chrome alloy steel with 1/2 in tip and 6 in L.
|
|
|
|
|
|
|
|
|
|
|
|
|
Machined to exacting standards from heat-treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys, after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
|
Machined to exacting standards from heat-treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys, after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
|
Machined to exacting standards from heat-treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys, after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
|
|
|
|
|
|
|
|
|
|
|
|
|
Machined to exacting standards from heat-treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys, after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
|
Made of heat-treated high carbon American steel. Features precision ground point for marking accurate hole starting easier. Use on metals softer than their point.
|
The scratch awls has a high impact plastic handle length of 4 in with a hardened and tempered steel blade. It can be used to start holes in soft wood and scribe or mark wood or other soft metals.
|
|
|
|
|
|
|
|
|
|
|
|
|
Cold chisel is ground for cutting, shaping and removing metal that is softer than the cutting edge. The blade and handle are made of chrome alloy steel with 5/8 in tip and 6-1/2 L.
|
It enables you to quickly and easily locate the tool around the head of the protruding nail.
|
Cold chisel is ground for cutting, shaping and removing metal that is softer than the cutting edge. The blade and handle are made of chrome alloy steel with 3/4 in tip and 7 in L.
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of heat-treated high carbon American steel. Machined specifically for removing spring or roll pins. Made with a hardened point, long shaft.
|
Made from heat-treated high carbon American steel. Designed for installing pins, keys, rivets and for starting their removal.
|
Machined to exacting standards from heat-treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys, after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of heat-treated high carbon American steel. Features precision ground point for marking accurate hole starting easier. Use on metals softer than their point.
|
The GreatNeck? magnetic brad and nail driver gets the job done without marring surfaces. This driver is ideal for working in tight corners and hard to reach spaces. The magnetic head holds the nail firm while downward pressure on an ergonomic solid wood handle easily inserts the nail. The driver is chrome-plated to resist rust. A metal ferrule is set firmly into the handle for durability.
|
The Vulcan claw is made of heat-treated carbon steel blade with a square plastic handle.
|
|
|
|
|
|
|
|
|
|
|
|
|
Made from heat-treated high carbon American steel. Designed for installing pins, keys, rivets and for starting their removal.
|
The Vulcan pry bar nail puller is made of dropped forged steel with hexagon steel construction for enhanced strength. It's a single claw tool.
|
Made of hardened and tempered alloy steel with square head. Round knurled body. Tips are cupped and chamfered. Square head prevents rolling. 4 in long. Set contains 1/32 in, 1/16 in and 3/32 in nails.
|
|
|
|
|
|
|
|
|
|
|
|
|
Dasco Pro cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat-treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper.
|
Dasco Pro cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat-treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper.
|
Dasco Pro cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat-treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper.
|
|
|
|
|
|
|
|
|
|
|
|
|
Made from heat-treated high carbon American steel. Designed for installing pins, keys, rivets and for starting their removal.
|
Machined to exacting standards from heat-treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys, after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
|
Heat-treated and plated alloy steel blades hold up to repeated use and are corrosion resistance. Chrome-plated steel ferrule for added strength. Bright, smooth finish on bar. Machined hardwood handle. Bar diameter of 3/16 in and length 3-3/8 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
Bar is drop-forged and heated for excellent strength during prying, digging and tamping with hexagon steel construction for enhanced strength. Gooseneck pattern.
|
Heat-treated, stamped 9-1/2 in steel flat bar. Nail slot and sharpened scraper blades. Rust-resistant powder-coated finish.
|
Dasco Pro cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat-treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper.
|
|
|
|
|
|
|
|
|
|
|
|
|
Dasco Pro cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat-treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper.
|
Made of heat-treated high carbon American steel. Machined specifically for removing spring or roll pins. Made with a hardened point, long shaft.
|
Spring tensioned, self opening tool made of plated steel with cushioned vinyl grip with revolving turret that has six hardened steel punches: 5/64 in, 3/32 in, 7/64 in, 1/8 in, 5/32 in and 3/16 in; used to make tiny holes in leather, plastic, rubber, canvas and other lightweight materials.
|
|
|
|
|
|
|
|
|
|
|
|
|
Stanley Nail Set, Specifications: 1/32 in Tip, Steel, Dimensions: 5 in L, Includes: #58-911 1/32 in, #58-912 2/32 in, #58-913 3/32 in Nail Setter
|
Dasco Pro cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat-treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper.
|
Dasco Pro cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat-treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper.
|
|
|
|
|
|
|
|
|
|
|
|
|
Dasco Pro cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat-treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper.
|
The forged hexagonal steel ripping bar made of 3/4 in Dia carbon steel is great for basic demolition work. It also features a slotted claw and beveled ends for performance and functionality.
|
Use to remove molding, open boxes, scrape paint and pull nails. High-carbon steel hardened and tempered, curved ground scraping end with nail slot. Fits easily into tool boxes or pouches.
|
|
|
|
|
|
|
|
|
|
|
|
|
Get the prying power you need with the 12-3/4 in Wonder Bar? Pry Bar. The strong high-carbon steel hand tool is designed to give you excellent leverage for pulling nails, lifting and scraping.
|
Heat-treated for durability with a special extracting claw and a beveled nail slot.
|
Designed for extracting deeply imbedded nails, these 12 in pullers are forged of 5/8 in hex, high-carbon steel. Claw(s) hardened and tempered for strength and long life. Rust-resistant powder-coated finish.
|
|
|
|
|
|
|
|
|
|
|
|
|
Hit Tool Center Punch and Nail Set, 3/16, 2/32 in Tip, Shank Type: Spring Loaded, Steel, Black-Oxide, 7 in L
|
Introducing the HIT Tool 1/32 in (#1) nail set and 2/32 in (#2) nail set combination hammerless spring tool model #NS1NS2. This dual-tipped, spring actuated tool has a 1/32 in nail setter on one end and a 2/32 in nail setter on the other. These nail sets are designed to efficiently set and countersink finish nails and brads into wood surfaces. The dual headed design features two of the most commonly used sizes for trim and finishing jobs. Utilizing the HIT Tool's patent pending hammerless impact technology, this tool is compact and lightweight yet provides precision accuracy even in tight spaces. The comfort grip provides for effortless and safe control of the extremely powerful, high-tensile spring. These features combine to create a versatile tool that would make a great addition to any toolbox.
|
Interchangeable tip for convenience. Hexagonal head prevents rolling and can be used as a standard drill chuck - nail set doubles as drill extension. Knurled locking collar for easy nail release and reversal. Accepts standard screwdriver bits for versatility. Long, beveled tip for easy nail head alignment. Fully hardened, precision-milled steel for long life. Set includes 1/32 in, 2/32 in, 3/32 in and #2 point Phillips nails.
|
|
|
|
|
|
|
|
|
|
|
|
|
The 1 in cold chisel is strong and durable. Its hardened, quenched and tempered for long life and strength. With one-piece construction and powder-coated finish this tool is ready for heavy-duty work like chopping through hard, abrasive materials.
|
Hit Tool Prick Punch and Center Punch, 1/8, 3/16 in Tip, Shank Type: Spring Loaded, Steel, Black-Oxide, 7 in L
|
A handy, economical tool for both the contractor and do-it-yourselfers, the Dasco Pro giant circle beam compass lets you scribe accurate circles up to 10 ft in Dia or larger using a 1/2 in OD dowel rod, PVC or rigid metal tubing as the beam.
|
|
|
|
|
|
|
|
|
|
|
|
|
Ideal for basic demolition work, the offset pattern ripping chisel allows for side pulling and ripping and has a slotted claw and beveled ends for functionality and performance.
|
Surfaces ground for precision nail pulling and prying resulting in less material damage, high visibility, durable finish helps prevent loss and makes it easy to find the tool on the job-site. Nail slot provides access for improved functionality and nail pulling. Precision tips for fast access and reduced damage to salvaged materials. Radius design increases durability, strength and better prying leverage. Striking pad assists users with penetration and prying.
|
The Vulcan pry bar nail puller is made from drop-forged steel with hexagon steel construction for enhanced strength. It's a double claws tool and be used for precision nail pulling and prying.
|
|
|
|
|
|
|
|
|
|
|
|
|
Hit Tool Hammerless Nail Starter and Set, 2/32 in Tip, Shank Type: Spring Loaded, Steel, Black-Oxide, 7 in L
|
The HIT Tool 2/32 in (#2) nail set and 3/32 in (#3) nail set combination hammerless spring tool model #NS2NS3. This dual tipped, spring actuated tool has a 2/32 in nail setter on one end and a 3/32 in nail setter on the other. These nail sets are designed to efficiently set and countersink finish nails and brads into wood surfaces. The dual headed design features two of the most commonly used sizes for trim and finishing jobs. Utilizing the HIT Tool's patent pending hammerless impact technology, this tool is compact and lightweight yet provides precision accuracy even in tight spaces. The comfort grip provides for effortless and safe control of the extremely powerful, high tensile spring. These features combine to create a versatile tool that would make a great addition to any toolbox.
|
Cold chisel is ground for cutting, shaping and removing metal that is softer than the cutting edge. The blade and handle are made of chrome alloy steel with 1 in tip and 8 in L.
|
|
|
|
|
|
|
|
|
|
|
|
|
Lightweight aluminum body with alloy steel internal components that provides accurate center punches to prevent drill bits from traveling. One-handed operation. No hammer needed.
|
The high-carbon steel wrecking bar is quite durable and ideal for heavy demolition jobs. It has a tri-lobe design which provides a secure grip for ease of use as well as a slotted claw and beveled ends for functionality and performance.
|
Our 12 in Pry Bar has a SHOCKSHIELD? grip for ultimate vibration reduction. This pry bar is designed to withstand the toughest of jobsite conditions while remaining sharp enough to pry, pull and scrape in tight spaces. The claws are induction hardened for added strength, ensuring long lasting sharpness over the life of the tool. The high leverage head of the pry bar is designed for easier prying.
|
|
|
|
|
|
|
|
|
|
|
|
|
Bar is forged half round, for added strength and less weight with wide, thin blade for easy prying.
|
Surfaces ground for precision nail pulling and prying resulting in less material damage, high visibility, durable finish helps prevent loss and makes it easy to find the tool on the job-site. Nail slot provides access for improved functionality and nail pulling. Precision tips for fast access and reduced damage to salvaged materials. Radius design increases durability, strength and better prying leverage. Striking pad assists users with penetration and prying.
|
Made from tempered, forged high-carbon alloy steel. Flat surface allows users to pry molding and trim reducing material damage, polished, beveled claws for nail pulling and prying.
|
|
|
|
|
|
|
|
|
|
|
|
|
The 10 in claw bar is precise and durable. Its flat striking face allows claw to be driven under deeply embedded nails. With polished beveled claws are ideal for precision nail pulling and prying, tempered body to help reduce spalling and its forged, high-carbon steel construction, this tool is ideal for small demolition projects.
|
The 8 in molding bar is precise and durable. Its flat striking face allows claw to be driven under deeply embedded nails. With polished flat surface and beveled claws for prying molding and trim, tempered body to help reduce spalling and its forged, high-carbon steel construction, this tool is ideal for removing trim with minimal damage.
|
Dasco Pro long cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat-treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper.
|
|
|
|
|
|
|
|
|
|
|
|
|
The 24 in hexagonal forged steel pry bar is strong and durable. With both a slotted claw and beveled ends for functionality and performance and 3/4 in Dia high-carbon steel, this tool is idea for basic demolition work.
|
The 12 in flat bar has a wide prying end for leverage. This bar has multiple nail pullers and point beveled ends for efficient nail removal.
|
Estwing's Handy claw is the best tool for getting under and removing nails, with a comfortable vinyl grip.
|
|