|
|
|
|
|
|
|
|
|
|
|
|
|
|
The AC56-UH lock-in utility hook keeps cords from getting tangled in your ladder. Locks securely into ladder top or other Lock-In System? accessories such as the job caddy or utility bucket. organize cords and keep them within reach. Utility hook holds extension cords, air hoses, garden hoses, strands of lights, paint sprayers and other tools or project materials.
|
Disposable liner for use with AC27-P paint cup SKU# 631.6558. Includes 4 liners.
|
5/16 in rope that can be cut to fit Werner extension ladders, up to 40 ft except double pulley system.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The AC27-P lock-in paint cup is great for trim painting and cut-in applications. With a built-in magnet to secure a paint brush, the paint cup holds 1 qt of paint. For use on ladders that include lock-in system sockets, it can be used with disposable paint cup liner AC27-L.
|
This is a great folding stool for in the kitchen, bathroom, rv's and more. You can carry or store this quick-folding step stool wherever is needed.
|
The AC58-TL lock-in Tool Lasso? secures tools while on the job. Tool Lasso? wraps around the grip of power tools, hand tools and caulk guns and locks securely into ladder top or lock-in System? socket on other accessories such as the job caddy or utility bucket. Having tools within reach saves trips up and down the ladder increasing productivity. compatible with the Tool Lasso? belt clip.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The AC19 extension ladder covers help prevent damage to support surfaces. Designed to snap over extension ladder rail end caps. Resists paints, stains, thinners and solvents. Can be used on all single and extension fiberglass and aluminum ladders.
|
The Rubbermaid step stool is great to have when something is just out of reach. It has an attractive, skid-resistant texture on its surface and four skid-resistant feet to ensure safety.
|
The Rubbermaid step stool is great to have when something is just out of reach. It has an attractive, skid-resistant texture on its surface and four skid-resistant feet to ensure safety.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy-duty polyurethane foam pads fit popular sized extension ladders to prevent scratches and dents on siding and support surfaces.
|
Give little ones a boost in the bathroom and help grown-ups reach high places, too. With safe, slip-resistant treads for big and little feet. This step stool folds for storage anywhere.
|
The AC50-JB-3 lock-in job bucket increases your work space with 600 cu-in of storage right at your fingertips. With the lock-in system, the job bucket fits right into the ladder top customizing your work space. Integrated tape measure and screwdriver holders are features of the job bucket along with top grooves to hold round pipes in place. Great for all trades like electrical, maintenance, plumbing and construction.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Large, ridged top step for secure footing. Step has a non-slip tread. Folds flat for storage. Industrial grade aluminum. Lightweight. Extends your reach 13inches. ANSI and OSHA compliant. Dimensions: Height closed: 13 inches; Height open: 12 inches; Width: 13 inches; Depth: 10.5 inches.
|
The guardian fall protection ladder hook provides an ideal method of securing the top of a ladder to a rooftop. When used with a paired ladder hook, both hooks fit over the top two rungs of the ladder and hook over the roof edge. Then the wing nuts of both hooks are tightened, holding the ladder firmly in place. These hooks are designed to fit single or extension ladders and are made from powder-coated steel for excellent durability and strength.
|
The AC52-UB lock-in utility bucket expands your work surface and customizes your ladder top. Great for on the jobsite or household use. The utility bucket locks securely into the ladder top and is ideal for wet or dry applications. Holds up to 1 gal of liquid and has a 25 lb capacity. Integrated Lock-In System? socket on the bucket allows for an additional paint cup (AC27-P), Tool Lasso? or utility hook (AC56-UH). Increases productivity by saving trips up and down the ladder.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Simple Spaces Folding Type 3 Step Stool, 225 lb Weight, 2 Steps, 15 in Step Width, 5-1/8 in Step Depth, Step Spacing: 7-3/4 in, Step Tread Type: Non-Slip PP Tread, Base Spread Size: 20 in, Steel, Hammertone Powder Coated, Gray, 19-1/4 in Width, 38-1/2 in Height, 20 in Depth
|
Ideal for dusting, cleaning and reaching, these compact stools offer a little extra height when you need it. Featuring a lightweight design, exceptional support and slip-resistant steps. After all, who couldn't use little help around the house.
|
This step stool is easy to set up or fold down for convenient and lightweight carrying and enhanced mobility. Its slim width when folded takes up minimal storage space. It stands upright on its own when folded. The stool has four skid-resistant foot pads and is resistant to rust and dents.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Louisville Ladder Stabilizer, Aluminum, Smooth, Suitable for: Louisville AE3216, AE3220, AE3224, AE3228, AE3232, AE3236, AE3240, FE3216, FE3220 and FE3224 Extension Ladders
|
The model 150B step stool has a large molded top that provides a large standing platform and a duty rating of 300 lb. The TRACTION-TRED? steps are slip-resistant and the external spreaders are pinchproof. Bottom step has double channel braces and the molded vinyl foot pads are riveted to the rails. The 150B is ideal for construction, plant, office or home applications.
|
The AC96 aluminum stabilizer spans 47 in and provides a standoff of 10 in. For use on aluminum ladders of all duty ratings. Mar-resistant rubber end caps protect the work surface. Paint can hook included. Ideal for stabilizing the M1 Series multiladders when in scaffold or stairway positions.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This Louisville 2 ft aluminum step stool has a load capacity of 300 lb, rated ANSI Type IA. This ladder is equipped with a wide top, pinch-resistant spreader braces, heavy-duty gusset bracing and angled aluminum slip-resistant rubber feet. The Louisville AS3002 step stool meets or exceeds the safety standards set by ANSI, CSA and OSHA.
|
Cosco Big Step Stool, 200 lb Weight, 2 Steps, Plastic/Steel, Opti-Bond, Black/Gray
|
The AC54-JC lock-in job caddy expands your work surface and customizes your ladder top. Holds large or odd shaped items like fluorescent bulbs or ceiling fan blades. There are four storage compartments to keep small parts separated. Holders for screwdrivers, pliers, putty knives and towels. End hook is built in for increased convenience. There is also an integrated Lock-In System? socket for adding an additional paint cup (AC27-P), Tool Lasso? or utility hook (AC56-UH).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For home repair, painting and maintenance projects. Green molded Tool-Tra-Top for quart can or small parts and slotted for tops; slotted for paint roller tray. Molded paint can hanger on back of top. Spill-Proof pail shelf with tool holders. Pinch-Proof spreaders. Slip resistant molded feet. Dimensions: front rails, 3" wide, front flange 3/4" wide; rear rails 1-1/8" wide; rear flange 1" wide; top 4-5/8" wide x 12-1/2" long; Steps 3" wide. Meets ANSI and U.L. Standards.
|
The Xtend+Climb? Ultralight FT3 step stool is an excellent choice for homeowners seeking a lightweight and versatile 3 step stool. Crafted with high-quality lightweight aluminum, this stool combines functionality with a clean design that complements any home decor. With a large top step standing at 32 in and a stable handle, the FT3 provides a reach height equivalent to that of a 4.5 ft step ladder. This makes it suitable for a wide range of tasks around the house, offering just the right amount of height for various needs. The Ultralight FT3 is highly practical and versatile, making it a popular choice among customers. Its thin profile, lightweight construction and sleek design make it a suitable addition to multiple rooms in the house. Whether you need to reach high storage areas, clean windows, or perform other household tasks, the FT3 is designed to provide the necessary height and stability. Weighing only 6 pounds, the FT3 is extremely lightweight, making it easy for every family member to use.
|
The 355 aluminum 5 ft step ladder has a duty rating of 225 lb and TOOL-TRA-TOP? that feature a convenient tray for holding tools or a paint can and slots for a paint roller tray. There is also a sturdy molded paint can hanger on the back of the top. The automatic SPILL-PROOF? pail shelf opens and closes with the ladder. The TRACTION-TRED? steps are slip-resistant.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 363 aluminum 3 ft step ladder has a duty rating of 250 lb and TOOL-TRA-TOP? that feature a convenient tray for holding tools or a paint can and slots for a paint roller tray. There is also a sturdy molded paint can hanger on the back of the top. The automatic SPILL-PROOF? pail shelf opens and closes with the ladder. The TRACTION-TRED? steps are slip-resistant.
|
This Louisville 4 ft lightweight aluminum step ladder has a load capacity of 225 lb, rated ANSI Type II. This ladder is equipped with a molded top with handyman's tool slots, molded pail shelf, slip-resistant rubber feet, steel gusset bracing and pinch-resistant spreader braces. This ladder is ideal for painting. The Louisville AS4004 step ladder meets or exceeds the safety standards set by ANSI, CSA and OSHA.
|
The 364 aluminum 4 ft step ladder has a duty rating of 250 lb and TOOL-TRA-TOP? that feature a convenient tray for holding tools or a paint can and slots for a paint roller tray. There is also a sturdy molded paint can hanger on the back of the top. The automatic Spill-Proof? pail shelf opens and closes with the ladder. The Traction-Tred? steps are slip-resistant.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hammertone coated finish. Sturdy tubular steel frame. Non-slip step surface. Folds for easy storage. Lightweight and easy to carry. Highest standing 27-1/2 in. Step size 15 in L x 10 in W, Open size 50-3/4 in H x 19-1/4 in W x 25 in D, Closed size 55-1/4 in H x 19-1/4 in W x 3 in D.
|
The corner buddy ladder stabilizer is ideal for providing additional stability for ladder work at corners and at flat, round or multi-dimensional construction surfaces. It easily connects to nearly any ladder, is lightweight and is powder-coated for additional durability and weather resistance. The corner buddy is specially designed with rubber bumpers for added protection of the substrate to which it is placed against. If you're in the market for a ladder stabilizer, there is nothing better available on the market than the corner buddy.
|
This Louisville 4 ft lightweight aluminum step ladder has a load capacity of 250 lb, rated ANSI Type I. This ladder is equipped with the innovative ProTop? with magnet and multiple tool slots, molded pail shelf, angled aluminum slip-resistant rubber feet, steel gusset bracing and pinch-resistant spreader braces. This ladder is ideal for painting. The Louisville AS2104 step ladder meets or exceeds the safety standards set by ANSI, CSA and OSHA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Large, heavy-duty injection molded polypropylene resin top step. Ribbed, slip-resistant step treads. Self-locking fold. Non-marring, skid-resistant leg tips and glides. Folds flat by lifting handle. Weighs 5 lb.
|
This Louisville 2 ft non-conductive fiberglass step stool has a load capacity of 300 lb, rated ANSI Type IA. This ladder is equipped with a wide top, pinch-resistant spreader braces, heavy-duty gusset bracing and angled aluminum slip-resistant rubber feet.
|
This Louisville 4 ft non-conductive fiberglass step ladder has a load capacity of 225 lb, rated ANSI Type II. This ladder is equipped with the innovative ProTop? with multiple tool slots, SHOX impact absorption system, slip-resistant rubber boot, pinch-resistant spreader braces and wide back braces. The Louisville FS4004 step ladder meets or exceeds the safety standards set by ANSI, CSA and OSHA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The AC78 QuickClick? stabilizer spans 44 in and provides a standoff of 10 in. Requires no tools to attach to ladder. Spring-loaded locking latch makes it easier and quicker to install and remove than any other stabilizer on the market. Mar-resistant rubber end caps protect the work surface. Paint can hook is included.
|
Whether you need extra seating or to reach that cabinet, this classic combo is all you need. Even grandma would approve of the timeless design that has offered over 70 years of comfort, convenience and value.
|
The 6002 fiberglass 2 ft step stool has a large molded top that provides a comfortable working platform. This hearty step stool has a duty rating of 250 lb and the bottom step has front and rear knee braces. The external spreaders are PINCH-PROOF? and the TRACTION-TRED? steps are slip-resistant.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 5906 fiberglass 6 ft step ladder has a duty rating of 225 lb with braces on the top step and top horizontal. Featuring a high performance HolsterTop? with a paint and tool holder, these step ladders have slip-resistant, TRACTION-TRED? steps and external PINCH-PROOF? spreaders. The EDGE? molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage. Fiberglass rails are non-conductive for working near electricity.
|
The 5904 fiberglass 4 ft step ladder has a duty rating of 225 lb with braces on the top step and top horizontal. Featuring a high performance HolsterTop? with a paint and tool holder, these step ladders have slip-resistant, TRACTION-TRED? steps and external PINCH-PROOF? spreaders. The EDGE? molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage. Fiberglass rails are non-conductive for working near electricity.
|
Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Aluminum steps are deeply serrated for slip-resistance. Plated steel braces on top and bottom steps and rear horizontals. Ribbed slip-resistant rubber foot pads protected by aluminum shoe. Shock-resistant bumper pad on inside rear footpads, avoids wear and damage in storage and transport. Blue non-conductive siderails and yellow top with a non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. Meets ANSI Code and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-1/8"; Rear Rails 1-3/4" wide; Rear Flange 1-3/16" wide and 5/8" wide in the front; Top 5-3/4" x 13"; Steps 3".
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 365 aluminum 5 ft step ladder has a duty rating of 250 lb and TOOL-TRA-TOP? that feature a convenient tray for holding tools or a paint can and slots for a paint roller tray. There is also a sturdy molded paint can hanger on the back of the top. The automatic SPILL-PROOF? pail shelf opens and closes with the ladder. The TRACTION-TRED? steps are slip-resistant.
|
For home repair, painting and maintenance projects. Green molded Tool-Tra-Top for quart can or small parts and slotted for tops; slotted for paint roller tray. Molded paint can hanger on back of top. Spill-Proof pail shelf with tool holders. Pinch-Proof spreaders. Slip resistant molded feet. Dimensions: front rails, 3" wide, front flange 3/4" wide; rear rails 1-1/8" wide; rear flange 1" wide; top 4-5/8" wide x 12-1/2" long; Steps 3" wide. Meets ANSI and U.L. Standards.
|
The 366 aluminum 6 ft step ladder has a duty rating of 250 lb and TOOL-TRA-TOP? that feature a convenient tray for holding tools or a paint can and slots for a paint roller tray. There is also a sturdy molded paint can hanger on the back of the top. The automatic SPILL-PROOF? pail shelf opens and closes with the ladder. The TRACTION-TRED? steps are slip-resistant.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 6005 fiberglass 5 ft step ladder features a HolsterTop? with the Lock-In System? that allows you to customize your ladder top. The system secures tools from falling while keeping them handy while working increasing productivity on the job. The tops also hold tools and have a sturdy paint can hanger on the back side. The external spreaders are PINCH-PROOF? and the TRACTION-TRED? steps are slip-resistant. This step ladder has a duty rating of 250 lb and offers the EDGE? bracing for enhanced strength and increased protection against damage. Fiberglass rails are non-conductive for working near electricity.
|
This Louisville 6 ft lightweight aluminum step ladder has a load capacity of 250 lb, rated ANSI Type I. This ladder is equipped with the innovative ProTop? with magnet and multiple tool slots, molded pail shelf, angled aluminum slip-resistant rubber feet, steel gusset bracing and pinch-resistant spreader braces. This ladder is ideal for painting. The Louisville AS2106 step ladder meets or exceeds the safety standards set by ANSI, CSA and OSHA.
|
The 374 aluminum 4 ft step ladder has a duty rating of 300 lb yet is lightweight and easy to transport. The TOOL-TRA-TOP? has a drill holster, convenient tray for tools or paint and small parts. There is also a sturdy molded paint can hanger on the backside of the top. The SPILL-PROOF? pail shelf has a rag rack and holds a gallon paint can and automatically closes with the ladder. There is a full set of horizontals on the rear section and the 4, 5 and 6 models have a unique H spreader with hand grip for easy one-handed carrying and closing. The TRACTION-TRED? steps are slip-resistant and double riveted.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This Louisville 6 ft lightweight aluminum step ladder has a load capacity of 225 lb, rated ANSI Type II. This ladder is equipped with a molded top with handyman's tool slots, molded pail shelf, slip-resistant rubber feet, steel gusset bracing and pinch-resistant spreader braces. This ladder is ideal for painting. The Louisville AS4006 step ladder meets or exceeds the safety standards set by ANSI, CSA and OSHA.
|
This Louisville 5 ft non-conductive fiberglass step ladder has a load capacity of 250 lb, rated ANSI Type I. This ladder is equipped with the innovative ProTop? with magnet and multiple tool slots, SHOX impact absorption system, slip-resistant rubber boot, pinch-resistant spreader braces, wide back braces and double-rivet step construction. The Louisville FS2005 step ladder meets or exceeds the safety standards set by ANSI, CSA and OSHA.
|
This Louisville 6 ft non-conductive fiberglass step ladder has a load capacity of 225 lb, rated ANSI Type II. This ladder is equipped with the innovative ProTop? with multiple tool slots, SHOX impact absorption system, slip-resistant rubber boot, pinch-resistant spreader braces and wide back braces. The Louisville FS4006 step ladder meets or exceeds the safety standards set by ANSI, CSA and OSHA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Equipped with DA BOOT, a slip resistant aluminum angle feet with thick aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Spreader bracer inside fiberglass rails help keep braces from getting hooked or abused in transit. Double rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Vertically mounted U-shaped back braces spaced on one foot intervals provide maximum stiffness and discourage unsafe climbing. Nonconductive full channel rails are convered with a polyester veil. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide.
|
The 6204 fiberglass 4 ft step ladder is ideal for the homeowner or the professional. With a duty rating of 300 lb, it features a HolsterTop? with the Lock-In System? to secure tools from falling while keeping them right at hand. The ladder offers a full set of rear horizontals and heavy-duty internal spreaders. All steps are knee braced and the foot pads are riveted to the EDGE? structure. The EDGE? bracing system helps protect the rail from damage. Each TRACTION-TRED? step is slip-resistant and double riveted. Fiberglass rails are non-conductive for working near electricity.
|
Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Double Rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Skid resistant surface and outer retaining edge. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This Louisville 6 ft non-conductive fiberglass step ladder has a load capacity of 250 lb, rated ANSI Type I. This ladder is equipped with the innovative ProTop? with magnet and multiple tool slots, SHOX impact absorption system, slip-resistant rubber boot, pinch-resistant spreader braces, wide back braces and double-rivet step construction. The Louisville FS2006 step ladder meets or exceeds the safety standards set by ANSI, CSA and OSHA.
|
Simple Spaces Folding Step Stool, 250 lb Weight, 4 Steps, 15 in Step Width, 5-1/8 in Step Depth, Step Spacing: 7-3/4 in, Step Tread Type: Non-Slip PP Tread, Base Spread Size: 37 in, Steel, Hammertone Powder Coated, Gray, 37 in Width, 62-1/2 in Height, 23 in Depth, Includes: Plastic Tray
|
The 375 aluminum 5 ft step ladder has a duty rating of 300 lb yet is lightweight and easy to transport. The TOOL-TRA-TOP? has a drill holster, convenient tray for tools or paint and small parts. There is also a sturdy molded paint can hanger on the backside of the top. The SPILL-PROOF? pail shelf has a rag rack and holds a gallon paint can and automatically closes with the ladder. There is a full set of horizontals on the rear section and the 4, 5 and 6 models have a unique H spreader with hand grip for easy one-handed carrying and closing. The TRACTION-TRED? steps are slip-resistant and double riveted.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Expand work step with 25-percent greater step surface, 3.75" step size. Durable top with magnet and multiple tool slots and comfort when climbing the ladder. Pinch-resistant internal spreader braces provide stability. Double-riveted steps. Heavy duty boot with maximum slip-resistant surface area.
|
The D716-2 is a lightweight aluminum extension ladder with a duty rating of 200 lb. The fixed lock allows easy push-up height adjustments. The exclusive ALFLO? rung joint means TWIST-PROOF? performance and the mar-resistant end caps help protect the surface ladder is leaning against. TRACTION-TRED? D-rungs are slip resistant and the side rails are modified I-beam.
|
This Louisville 16 ft aluminum extension ladder has a 200 lb load capacity, rated ANSI type III. This ladder is equipped with D-shape rungs fully serrated for a slip-resistant surface, fixed runglock, mar-resistant rail end caps and slip-resistant rubber feet.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
"Spill-Proof pail shelf with rag rail and tool holders (4' and above). Blue molded Tool-Tra-Top slotted for paint roller tray. Handy bucket holder clip. Pinch-Proof spreaders. Bottom and top steps braced. Slip-resistant tread on steps. Slip- resistant molded shoes. Hi-strength heat tempered heavy duty aluminum. UL Listed. Meets ANSI Code and OSHA requirements. Dimensions: 3""W front rails; 3/4""W front flange; 1-1/8""W rear rails; 1""W rear flange; 5""W x 12-3/8""L top ; 3""W steps."
|
The 376 aluminum 6 ft step ladder has a duty rating of 300 lb yet is lightweight and easy to transport. The TOOL-TRA-TOP? has a drill holster, convenient tray for tools or paint and small parts. There is also a sturdy molded paint can hanger on the backside of the top. The SPILL-PROOF? pail shelf has a rag rack and holds a gallon paint can and automatically closes with the ladder. There is a full set of horizontals on the rear section and the 4, 5 and 6 models have a unique H spreader with hand grip for easy one-handed carrying and closing. The TRACTION-TRED? steps are slip-resistant and double riveted.
|
This Louisville 8 ft lightweight aluminum step ladder has a load capacity of 250 lb, rated ANSI Type I. This ladder is equipped with the innovative ProTop? with magnet and multiple tool slots, molded pail shelf, angled aluminum slip-resistant rubber feet, steel gusset bracing and pinch-resistant spreader braces. This ladder is ideal for painting. The Louisville AS2106 step ladder meets or exceeds the safety standards set by ANSI, CSA and OSHA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This Louisville 8 ft non-conductive fiberglass step ladder has a load capacity of 225 lb, rated ANSI Type II. This ladder is equipped with the innovative ProTop? with multiple tool slots, SHOX impact absorption system, slip-resistant rubber boot, pinch-resistant spreader braces and wide back braces. The Louisville FS4008 step ladder meets or exceeds the safety standards set by ANSI, CSA and OSHA.
|
The 6006 fiberglass 6 ft step ladder features a HolsterTop? with the Lock-In System? that allows you to customize your ladder top. The system secures tools from falling while keeping them handy while working increasing productivity on the job. The tops also hold tools and have a sturdy paint can hanger on the back side. The external spreaders are PINCH-PROOF? and the TRACTION-TRED? steps are slip-resistant. This step ladder has a duty rating of 250 lb and offers the EDGE? bracing for enhanced strength and increased protection against damage. Fiberglass rails are non-conductive for working near electricity.
|
This 6 ft non-conductive DEWALT? fiberglass step ladder has a load capacity of 250 lb, rated ANSI Type I. This ladder features an innovative top with magnet and multiple tool slots, an impact absorption system, slip-resistant aluminum shoes, wide back braces and double-rivet step construction. This DEWALT? DXL3110-06 step ladder meets or exceeds the safety standards set by ANSI, CSA and OSHA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 6205 fiberglass 5 ft step ladder is ideal for the homeowner or the professional. With a duty rating of 300 lb, it features a HolsterTop? with the Lock-In System? to secure tools from falling while keeping them right at hand. The ladder offers a full set of rear horizontals and heavy-duty internal spreaders. All steps are knee braced and the foot pads are riveted to the EDGE? structure. The EDGE? bracing system helps protect the rail from damage. Each TRACTION-TRED? step is slip-resistant and double riveted. Fiberglass rails are non-conductive for working near electricity.
|
This Louisville 16 ft aluminum extension ladder has a 200 lb load capacity, rated ANSI type III. It is equipped with the maxlock rung lock, custom engineered from a patented, advanced molecular polymer, maxlock is the strongest, toughest, lightest rung lock ever made. This ladder is also equipped with D-shape rungs fully serrated for a slip-resistant surface, mar-resistant rail end caps and slip-resistant rubber feet.
|
Structural molded top with automatic opening pail shelf. Slip-resistant rubber feet. Aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Meets or exceeds the safety standards set by ANSI and OSHA. 3 in wide steps.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This Louisville 6 ft non-conductive fiberglass step ladder has a load capacity of 300 lb, rated ANSI Type IA. This ladder is equipped with the new and innovative raptor top with magnet and multiple tool slots, SHOX impact absorption system, new raptor boots with non-marring bonded tread mechanically fastened to the upper boot to create a secure slip-resistant footing, inside spreader braces, wide back braces and double-rivet step construction. The Louisville FS1506 step ladder meets or exceeds the safety standards set by ANSI, CSA and OSHA.
|
This Louisville 4 ft fiberglass cross step ladder has a type IA duty rating with load capacity of 300 lb. This ladder combines the shelf and step ladder for a 2-in-1 combination made to take on multiple placement locations. The shelf design and its unique ProTop? and innovative locking mechanism allows for positioning against a wall, building or pole. When unlocked, this ladder sets up as a regular step ladder. The angles of the step ladder allow the capability to get closer to the work area. The cross-step ladder is equipped with a V-shape ProTop? with non-marring slip-resistant rubber tread that allows it to be placed safely on corners and poles. This ladder's ProTop? also features a magnet and multiple slots that allow quick and easy access to your tools.
|
The 5908 fiberglass 8 ft step ladder has a duty rating of 225 lb with braces on the top step and top horizontal. Featuring a high performance HolsterTop? with a paint and tool holder, these step ladders have slip-resistant, TRACTION-TRED? steps and external PINCH-PROOF? spreaders. The EDGE? molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage. Fiberglass rails are non-conductive for working near electricity.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 6206 fiberglass 6 ft step ladder is ideal for the homeowner or the professional. With a duty rating of 300 lb, it features a HolsterTop? with the Lock-In System? to secure tools from falling while keeping them right at hand. The ladder offers a full set of rear horizontals and heavy-duty internal spreaders. All steps are knee braced and the foot pads are riveted to the EDGE? structure. The EDGE? bracing system helps protect the rail from damage. Each TRACTION-TRED? step is slip-resistant and double riveted. Fiberglass rails are non-conductive for working near electricity.
|
Twist-proof due to the Alflo rung joints. Mar-resistant molded end caps and rail closures. Traction-tred deeply serrated flat steps. Easy to grip modified I-beam siderails. Smoothly operating extruded aluminum double rung locks. Shoe pivots to allow the shoe pad full ground contact for slip resistance. UL listed. Meets ANSI code and OSHA requirements. 2-3/4 in W siderails, 15/16 in W flange, 1- 1/2 in W rungs. Base width 16 in outside rails. Length of extension ladders when not extended is half the total length of the sections.
|
The 6008 fiberglass 8 ft step ladder features a HolsterTop? with the Lock-In System? that allows you to customize your ladder top. The system secures tools from falling while keeping them handy while working increasing productivity on the job. The tops also hold tools and have a sturdy paint can hanger on the back side. The external spreaders are PINCH-PROOF? and the TRACTION-TRED? steps are slip-resistant. This step ladder has a duty rating of 250 lb and offers the EDGE? bracing for enhanced strength and increased protection against damage. Fiberglass rails are non-conductive for working near electricity.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This 6 ft non-conductive DeWALT? fiberglass step ladder has a load capacity of 300 lb, rated ANSI Type IA. This ladder features an innovative top with magnet and multiple tool slots, 25% greater step surface, an impact absorption system, heavy-duty boots with non-marring bonded tread mechanically fastened to the upper boot to create a secure slip-resistant footing, inside spreader braces, wide back braces and double-rivet step construction. This DeWALT? DXL3010-06 step ladder meets or exceeds the safety standards set by ANSI, CSA and OSHA.
|
The TW373-30 aluminum portable 3 ft work stand features serrated slip-resistant steps that are 28 in wide for comfortable standing. The spreaders are PINCH-PROOF? and the bottom steps are double braced. The TW370-30 Series of work stands boasts a duty rating of 300 lb per side allowing for one or two person jobs. Mar-resistant feet for slip resistance on concrete, wood and vinyl floors. Lightweight and easy to transport. Extra wide for versatile use as work stand, stage or material support.
|
The L6204 Fiberglass 4 ft Leaning Ladder is ideal for the professional. With a duty rating of 300 lb, it features the LEANSAFE? ladder top that secures tools and accessories and is uniquely designed to securely lean against flat wall surfaces, wall corners, poles and wall studs and perform as a standard stepladder. LEANSAFE? ladders have a lower rear rail to front rail connection point allowing the user to get closer to the work when in stepladder mode. Leaning a ladder safely requires that the rear rail is latched to the front rail. Werner's patent pending single latch design stays engaged when needed and is centrally located to easily open and close.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 6208 fiberglass 8 ft step ladder is ideal for the homeowner or the professional. With a duty rating of 300 lb, it features a HolsterTop? with the lock-in system to secure tools from falling while keeping them right at hand. The ladder offers a full set of rear horizontals and heavy-duty internal spreaders. All steps are knee braced and the foot pads are riveted to the EDGE? structure. The EDGE bracing system helps protect the rail from damage. Each Traction-Tred? step is slip-resistant and double-riveted. Fiberglass rails are non-conductive for working near electricity.
|
The 378 aluminum 8 ft step ladder has a duty rating of 300 lb yet is lightweight and easy to transport. The TOOL-TRA-TOP? has a drill holster, convenient tray for tools or paint and small parts. There is also a sturdy molded paint can hanger on the backside of the top. The SPILL-PROOF? pail shelf has a rag rack and holds a gallon paint can and automatically closes with the ladder. There is a full set of horizontals on the rear section. The TRACTION-TRED? steps are slip-resistant and double riveted.
|
This Louisville 6 ft fiberglass cross step ladder has a type IA duty rating with load capacity of 300 lb. This ladder combines the shelf and step ladder for a 2-in-1 combination made to take on multiple placement locations. The shelf design and its unique ProTop? and innovative locking mechanism allows for positioning against a wall, building or pole. When unlocked, this ladder sets up as a regular step ladder. The angles of the step ladder allow the capability to get closer to the work area. The cross-step ladder is equipped with a V-shape ProTop? with non-marring slip-resistant rubber tread that allows it to be placed safely on corners and poles. This ladder's ProTop? also features a magnet and multiple slots that allow quick and easy access to your tools.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This Louisville 8 ft non-conductive fiberglass step ladder has a load capacity of 250 lb, rated ANSI Type I. This ladder is equipped with the innovative ProTop? with magnet and multiple tool slots, SHOX impact absorption system, slip-resistant rubber boot, pinch-resistant spreader braces, wide back braces and double-rivet step construction. The Louisville FS2008 step ladder meets or exceeds the safety standards set by ANSI, CSA and OSHA.
|
This 8 ft non-conductive DeWALT? fiberglass step ladder has a load capacity of 250 lb, rated ANSI Type I. This ladder features an innovative top with magnet and multiple tool slots, an impact absorption system, slip-resistant aluminum shoes, wide back braces and double-rivet step construction. This DeWALT? DXL3110-08 step ladder meets or exceeds the safety standards set by ANSI, CSA and OSHA.
|
This Louisville 20 ft aluminum extension ladder has a 200 lb load capacity, rated ANSI type III. It is equipped with the maxlock rung lock, custom engineered from a patented, advanced molecular polymer, maxlock is the strongest, toughest, lightest rung lock ever made. This ladder also is equipped with D-shape rungs fully serrated for a slip-resistant surface, mar-resistant rail end caps, rope and pulley and slip-resistant rubber feet.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
QUICKLATCH equipped runglock provides easier method of securing fly base sections when extended. Heavy-duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Side rails are full 3" extrusions shaped into a modified I-beam for strength and light weight. Interlocking rails keep fly and base sections from coming apart. Meets or exceeds the safety standards set by ANSI and OSHA. ProGrip- integrated surface protector with non-marring, slip resistant pads and hand grips. Dimensions: 3" rail depth, 5-1/4" stack height, 15-1/4" base inside, 14-5/16" fly inside, 17-1/8" base outside and 16-3/16" fly outside. AE4216PG does not include rope & pulley.
|
This Louisville 4 ft aluminum sawhorse ladder has a 300 lb load capacity, rated ANSI Type IA. Step on up to the extra-wide top with slip-resistant tread, giving you plenty of room to work on. Designed with a gap in the center of the top for easy handling, this sawhorse is built to move around your jobsite. This ladder combines two essential tools to create a lightweight wide surface and a support tool for sawing and other tasks. Need a scaffold so you can move from one side to the other, simply put down a scaffold-grade wood or metal plank between the two and walk across. Put a large flat sheet of board down and now you have a table top work station. This sawhorse ladder is equipped with angled aluminum slip-resistant rubber feet, heavy-gauge steel hinges, heavy-duty gusset bracing and double-rivet step construction. The Louisville L-2032-02 sawhorse ladder meets or exceeds the safety standards set by ANSI, CSA and OSHA.
|
This Louisville 8 ft non-conductive fiberglass step ladder has a load capacity of 300 lb, rated ANSI Type IA. This ladder is equipped with the new and innovative raptor top with magnet and multiple tool slots, SHOX impact absorption system, new raptor boots with non-marring bonded tread mechanically fastened to the upper boot to create a secure slip-resistant footing, inside spreader braces, wide back braces and double-rivet step construction. The Louisville FS1508 step ladder meets or exceeds the safety standards set by ANSI, CSA and OSHA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Built to last, the WERNER 375 lb duty-rated 7406 fiberglass 6 ft step ladder is rugged and ready for the job. This ladder features extra heavy-duty aluminum HolsterTop?, internal spreaders and external rail shields for long lasting durability. With The EDGE? bracing system and GLAS*MARK? violator stripes on the rails, the 7400 Series is built to handle the worksite and stands ready for tough jobs. Fiberglass rails are non-conductive for working near electricity.
|
The L6206 fiberglass 6 ft leaning ladder is ideal for the professional. With a duty rating of 300 lb, it features the LEANSAFE? ladder top that secures tools and accessories and is uniquely designed to securely lean against flat wall surfaces, wall corners, poles and wall studs and perform as a standard stepladder. LEANSAFE? ladders have a lower rear rail to front rail connection point allowing the user to get closer to the work when in stepladder mode. Leaning a ladder safely requires that the rear rail is latched to the front rail. Werner's patent pending single latch design stays engaged when needed and is centrally located to easily open and close.
|
The D1216-3 aluminum extension ladder is a compact, 3-section ladder that has a duty rating of 225 lb and interlocking side rails. The TRACTION-TRED? D-rungs are slip resistant and the, spring-loaded locks operate smoothly for easy operation. Shoes rest flat or are held in spur position with the SHU-LOK? feature. Mar-resistant end caps also help protect the surface the ladder is leaning against. Exclusive ALFLO? rung joint means TWIST-PROOF? performance every time.
|
|
|
