Home > PAINT & SUNDRIES > SUNDRIES > PATCHING & REPAIR > WOOD REPAIR
Sort By:
Page of 1
Rock Hard 1 Water Putty Kwikwood 8257 Wood Repair Epoxy Putty PC-Petrifier 84441 Wood Hardener
Repairs floors, furniture, plaster, walls or woodwork. Fills cracks, knots, nail and screw holes. Permanently adheres in cement, plaster, stone, tile and wood. Dries to a natural cream color. Can be colored by mixing with a latex or vinyl stain or latex paint (use only water soluble colors). Can be sawed, chiseled, sanded, painted, carved, polished, colored and molded. KwikWood is a hand-mixable epoxy putty, formulated to repair and rebuild wood. After mixing, it cures to the same density as wood and becomes an integral part of the repair. For use on exterior or interior applications, it contains no solvents, will not rot, shrink, crack or pull away. KwikWood has a 15 to 25 min work life. After 60 min, it can be machined, drilled, tapped, sanded, filed and painted. Stronger than wood, KwikWood dries to a light tan color. PC-Petrifier? rotted wood hardener repairs wood damaged by insects or rot. It is a liquid that is brushed, sprayed or injected into the pores of the wood. No mixing. Prepares wood for filling, priming and painting. Improve the hardness and minimize damaged wood removal. Water based formula allows for deep penetration.
Durham?s Rock Hard Water Putty Bondo/Dynatron 20058 Cream Hardener PC-Rot Terminator 350614 Wood Hardener
Repairs floors, furniture, plaster, walls or woodwork. Fills cracks, knots, nail and screw holes. Permanently adheres in cement, plaster, stone, tile and wood. Dries to a natural cream color. Can be colored by mixing with a latex or vinyl stain or latex paint (use only water soluble colors). Can be sawed, chiseled, sanded, painted, carved, polished, colored and molded. Bondo? all-purpose white cream hardener mixes with 2-part fillers, putties and glazes to create high-quality, long-lasting repairs. When filler and hardener are mixed, a chemical reaction occurs to create a mixture that will deliver a strong, lasting repair. Our hardener is smooth and easy to mix with fillers, putties and glazes. PC-Rot Terminator? epoxy rotted wood hardener is for wood that has structural damage caused by insects or rot. The mixture of resin and hardener produces a low viscosity liquid that penetrates the distressed wood and cures hard. It is slow curing, allowing time for the liquid to deeply penetrate the wood. It has zero solvents or volatiles.
Minwax 41700000 Wood Hardener 3M Bondo Home Solutions Wood Filler ACRYLIC CRACK REPAIR KIT 1PT
Minwax? high-performance wood hardener is a quick drying liquid formulated to strengthen and reinforce decayed or rotting wood. Bondo? wood filler is a permanent, fully paintable repair material for a broad range of projects inside and outside the home, ideal for almost any wood surface, the two-part wood filler forms a permanent bond and will not shrink, it cures fast, in as little as 15 mins it can be easily sanded by hand or power tools, Bondo? wood filler is suitable for staining or painting in only 25 mins. Make invisible, permanent repairs to cracked walls and ceilings in under an hour. No sanding required. Once the second coat dries, it is ready to paint. No primer needed. The specially formulated acrylic emulsion is used with a polyester mesh to bridge over cracks. It retains its flexibility as it dries, without shrinking. This allows the repair to move as the wall moves, leaving a seamless repair that will not reopen like other fillers or putties.
EPOXY WOOD PUTTY 12OZ SOLVENT GENERAL PURPOSE 1PT Bondo/Dynatron 20131 Rotted Wood Restorer
For repairing, replacing or adding to wood and most rigid surfaces. Use on window sills, thresholds, window and door frames, columns, stair steps, balustrades, floors, capitals, moldings, doors, shutters, indoor and outdoor furniture, statues, archaeological and art restoration. Bonds permanently with high strength to most surfaces. It fills cracks, holes and voids of any size without the shrinking and crumbling. Can be painted, stained, wood-grained, sawed, nailed, planed, sanded, carved and machined like wood. Can be cast into shapes and sculpted by hand before hardening. Bonds equally well to ceramics, concrete, metal, glass, fiberglass and most rigid surfaces. Contains no VOC?s or noxious odors. Color can be changed, by mixing with stains, dyes or pigments. Light-weight epoxy adhesive system consisting of 2 components: resin paste (A) and hardener paste (B). Solvent for Liquid Wood?. For thinning the product and cleaning up. Bondo? rotted wood restorer will solidify soft and spongy wood by penetrating into the wood surface to create a solid base and stop rot quickly. Wood rot is a common issue for most homeowners, regardless of where you live. It can be easily repaired with this restoration product. It is excellent for use with Bondo? wood filler (sold separately).
FILLER WOOD LIQUID 12OZ RESTORATION WOOD KIT 24OZ EPOXY WOOD PUTTY 2PINT
For regenerating and waterproofing rotted, dried-out or spongy window sills, thresholds, window and door frames, columns, stair steps, balustrades, floors, capitals, moldings, doors, shutters, indoor and outdoor furniture, archaeological and art restoration, boats and millwork of all kinds. Can be sawed, planed, routed, carved, drilled, nailed, sanded, glued and painted. LiquidWood is also a primer for WoodEpox. Consists of 2 clear, epoxy liquids like resin (A) and hardener (B). Water resistant. Permanent solution for repairing wood rot or decay and replacing damaged wood. This kit conveniently packages together equal volumes of Liquid Wood? A and B, WoodEpox? A and B and Abosolv. Choose from 3 sizes. Kit also contains disposable gloves, putty knife, mixing sticks and instructions. For repairing, replacing or adding to wood and most rigid surfaces. Use on window sills, thresholds, window and door frames, columns, stair steps, balustrades, floors, capitals, moldings, doors, shutters, indoor and outdoor furniture, statues, archaeological and art restoration. Bonds permanently with high strength to most surfaces. It fills cracks, holes and voids of any size without the shrinking and crumbling. Can be painted, stained, wood-grained, sawed, nailed, planed, sanded, carved and machined like wood. Can be cast into shapes and sculpted by hand before hardening. Bonds equally well to ceramics, concrete, metal, glass, fiberglass and most rigid surfaces. Contains no VOC?s or noxious odors. Color can be changed, by mixing with stains, dyes or pigments. Light-weight epoxy adhesive system consisting of 2 components: resin paste (A) and hardener paste (B).
FILLER WOOD LIQUD 2PINT Durham?s Rock Hard Wood Putty EPOXY WOOD PUTTY 2QUART
For regenerating and waterproofing rotted, dried-out or spongy window sills, thresholds, window and door frames, columns, stair steps, balustrades, floors, capitals, moldings, doors, shutters, indoor and outdoor furniture, archaeological and art restoration, boats and millwork of all kinds. Can be sawed, planed, routed, carved, drilled, nailed, sanded, glued and painted. LiquidWood is also a primer for WoodEpox. Consists of 2 clear, epoxy liquids like resin (A) and hardener (B). Water resistant. Repairs floors, furniture, plaster, walls or woodwork. Fills cracks, knots, nail and screw holes. Permanently adheres in cement, plaster, stone, tile and wood. Dries to a natural cream color. Can be colored by mixing with a latex or vinyl stain or latex paint (use only water soluble colors). Can be sawed, chiseled, sanded, painted, carved, polished, colored and molded. For repairing, replacing or adding to wood and most rigid surfaces. Use on window sills, thresholds, window and door frames, columns, stair steps, balustrades, floors, capitals, moldings, doors, shutters, indoor and outdoor furniture, statues, archaeological and art restoration. Bonds permanently with high strength to most surfaces. It fills cracks, holes and voids of any size without the shrinking and crumbling. Can be painted, stained, wood-grained, sawed, nailed, planed, sanded, carved and machined like wood. Can be cast into shapes and sculpted by hand before hardening. Bonds equally well to ceramics, concrete, metal, glass, fiberglass and most rigid surfaces. Contains no VOC?s or noxious odors. Color can be changed, by mixing with stains, dyes or pigments. Light-weight epoxy adhesive system consisting of 2 components: resin paste (A) and hardener paste (B).
FILLER WOOD LIQUID 2QUART EPOXY WOOD RESTORE PREM 32OZ RESTORATION WOOD KIT 4QT
For regenerating and waterproofing rotted, dried-out or spongy window sills, thresholds, window and door frames, columns, stair steps, balustrades, floors, capitals, moldings, doors, shutters, indoor and outdoor furniture, archaeological and art restoration, boats and millwork of all kinds. Can be sawed, planed, routed, carved, drilled, nailed, sanded, glued and painted. LiquidWood is also a primer for WoodEpox. Consists of 2 clear, epoxy liquids like resin (A) and hardener (B). Water resistant. J-B Weld Wood Restore? premium liquid epoxy is a high-strength liquid epoxy coating. It is a specially formulated coating that can be used to seal wood surfaces with a durable clear finish or to strengthen wood surfaces damaged over time or decaying as a result of rotted wood. The special formula penetrates and seals the wood to reinforce the fibers reducing further decay and providing a solid base for J-B Weld Wood Restore? repair putty or premium epoxy putty compound. When fully cured it provides a clear durable finish for wood and other surfaces. Permanent solution for repairing wood rot or decay and replacing damaged wood. This kit conveniently packages together equal volumes of Liquid Wood? A and B, WoodEpox? A and B and Abosolv. Choose from 3 sizes. Kit also contains disposable gloves, putty knife, mixing sticks and instructions.
EPOXY WOOD PUTTY 2GALLON FILLER WOOD LIQUID 2GALLON
For repairing, replacing or adding to wood and most rigid surfaces. Use on window sills, thresholds, window and door frames, columns, stair steps, balustrades, floors, capitals, moldings, doors, shutters, indoor and outdoor furniture, statues, archaeological and art restoration. Bonds permanently with high strength to most surfaces. It fills cracks, holes and voids of any size without the shrinking and crumbling. Can be painted, stained, wood-grained, sawed, nailed, planed, sanded, carved and machined like wood. Can be cast into shapes and sculpted by hand before hardening. Bonds equally well to ceramics, concrete, metal, glass, fiberglass and most rigid surfaces. Contains no VOC?s or noxious odors. Color can be changed, by mixing with stains, dyes or pigments. Light-weight epoxy adhesive system consisting of 2 components: resin paste (A) and hardener paste (B). For regenerating and waterproofing rotted, dried-out or spongy window sills, thresholds, window and door frames, columns, stair steps, balustrades, floors, capitals, moldings, doors, shutters, indoor and outdoor furniture, archaeological and art restoration, boats and millwork of all kinds. Can be sawed, planed, routed, carved, drilled, nailed, sanded, glued and painted. LiquidWood is also a primer for WoodEpox. Consists of 2 clear, epoxy liquids like resin (A) and hardener (B). Water resistant.