|
|
|
|
|
|
|
|
|
|
|
|
|
|
Eaveguard? Start-R-Roll is specifically designed to provide a protective waterproof base beneath the first course of shingles. Its zip strip seals down shingle tabs to protect against wind lift-up. It can be used for roof flashing and gutter repairs.
|
EPA approved. Installs easily near the roof ridge. For composition shingle, shake or tile roofs (bend strips to conform to the shape of the tile). For long-lasting protection.
|
Henry? Eaveguard? Self-adhered shingle underlayment provides a secondary line of defense to keep water that can get behind shingles from infiltrating further to help ensure the longevity of your roof. With direct-to-deck application, Eaveguard? is designed to offer protection against water penetration caused by wind driven rain or ice damming when installed in vulnerable areas of steep-slope roofs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For installation under new shingles to prevent leaks from ice build-up and wind-driven rain. Asphalt composition fortified with rubber (SBS). Flexible and elastic at low temperatures. Top surface coated with sand to provide a safe, non-slip working area. Split-back release film, self-adhering, easy to apply, easy to cut to size. Self-sealing around nails. Will not rot or decompose. Meets ASTM D1970, UL Class A and C fire rating.
|
Henry? Eaveguard? Self-adhered shingle underlayment provides a secondary line of defense to keep water that can get behind shingles from infiltrating further to help ensure the longevity of your roof. With direct-to-deck application, Eaveguard? is designed to offer protection against water penetration caused by wind driven rain or ice damming when installed in vulnerable areas of steep-slope roofs.
|
A replacement for #15 or #30 oil saturated felt, designed for steep slope roofing under asphalt shingles, synthetic shingles, residential metal roofing and cedar shakes, 12 times stronger than #30 felt, meets and exceeds ASTM D226 Types I & II and D4689 Types II & IV, 8 square more per roll compared to #30 felt, easier to install - wider, lighter and more coverage per lap, synthetic construction is impervious to mold, lays flat and does not absorb water and wrinkle, enhanced UV protection, no oil leaching, no hazardous material content, fiber grip slip-resistant walking surface, advanced backside non-slip coating, low temperature flexibility. Roll size of 10 sq or 93 sq-m.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
7 mil thickness. Meets ICC-ES-ESR-3905 standard. UV-resistant. Can be exposed for up to 6 months. 10 sq Roll size. Made in USA.
|
7 mil thickness, meets ICC-ES-ESR-3905 standard. UV-resistant. Can be exposed for up to 6 months. Roll size: 10 sq. Made in USA.
|
Smooth, film surface link barrier with special adhesive for one-time repositioning, but aggressively adheres over time. Unique film surface pattern improves footing even in hot weather. Self seals around nails or metal roofing fasteners. Split back release film peels off in layers for faster installation and greater homeowner value. Fiberglass reinforcement helps resist wrinkling and buckling. Lays flatter under shingles. Design to withstand high metal roof temperatures and will not melt or flow. High temperature compound is suitable for most metal roof applications. For application under copper and zinc. Passes low temperature flexibility (-20 deg) and waterproof integrity after low temperature flexibility requirements. Can be exposed for up to 60 days if necessary.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A SBS modified bitumen high temperature roofing underlayment reinforced with a textured skid-resistant polyethylene film specifically designed to be self-adhered on sloped roof surfaces as secondary seal under shingles or tile, self-seals when penetrated by mechanical fasteners or roofing nails prevents lateral moisture migration; provides premium anti-resistant textured blue film surface for applicator safety provides split release backing for fast application meets ASTM D1970 standard and is ICC listed.
|
MFM Wind & Water Seal? is a 40 mil, self-adhering roofing underlayment composed of a non-slip polymer film laminated to a high-temperature rubberized asphalt adhesive. A split release film protects the adhesive and is removed as the underlayment is installed. MFM Wind & Water Seal? is engineered for use under all roofing materials including metal, asphalt shingles, shake or concrete shingles, and clay tiles. MFM Wind & Water Seal? adheres aggressively to most clean, dry substrates including metal, plywood, OSB, foam insulation, house-wrap, rigid vinyl and masonry.
|
7 mil thickness, meets ICC-ES-ESR-3905 standard. UV-resistant. Can be exposed for up to 6 months. Roll size: 10 sq. Made in USA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#30 felt replacement used for steep slope roofing designed for use under all primary roofing types including Asphalt Shingles, Synthetic Shingles, Metal roofing and Cedar Shakes. 11X lighter and 14X stronger than #30 felt, Class A Fire ASTM E108, meets and exceeds ASTM D226 Types I & II and D4689 Types II & IV, Class 4 hail rating, ICC ES Approved: synthetic construction inert to mold growth, Patented "Sure-Foot" slip resistant nodular walking surface, contributes to "LEED" points, certified minimum of 20% reclaimed content (100% recyclable), all temperature performance -40 to 240 deg F, 6 month UV exposure, cool light gray surface doesn't expand or contract, dual logo custom printing available, Roll size of 10 sq or 93 sq-m.
|
A premium Ice Damming and Leak protection used for steep slope roofing under all metal, tile, slate, shake and shingle roofing, the only modified rubberized asphalt Peel & Stick underlayment with a patented slip resistant "Sure-Foot" nodular walking surface technology that allows for easier steep slope walkability, even in wet or dusty conditions. PSU30 also features a crinkled silicon treated poly split release liner making removal quicker and easier than single sheet competitors. Features a self sealing lap seal system which forms an impervious asphalt to asphalt bond at overlapping seams, delivering superior waterproofing protection, an approved Polyfoam underlayment for use with "Polyset" foam systems, Class A Fire ASTM E108, Meets and exceeds ASTM D1970, high temperature (240 deg F/115 deg C) flow resistance, installation temperature 40 deg F (5 deg C) and above, synthetic construction inert to mold growth, cool light gray surface doesn't expand or contract, up to 6 months UV exposure, Roll size of Gross 216 sq-ft. or 20 sq-m, Net of overlap 2 sq.
|
Peel & Seal? is the original, self-stick roll roofing specifically designed for low slope residential and commercial applications. Composed of an exclusive formula consisting of laminated aluminized foil, high-density polymer films and a thick layer of rubberized asphalt, Peel & Seal? provides a long-lasting, durable, maintenance-free roofing surface.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Peel & Seal? is the original, self-stick roll roofing specifically designed for low slope residential and commercial applications. Composed of an exclusive formula consisting of laminated aluminized foil, high-density polymer films and a thick layer of rubberized asphalt, Peel & Seal? provides a long-lasting, durable, maintenance-free roofing surface.
|
Peel & Seal? is the original, self-stick roll roofing specifically designed for low slope residential and commercial applications. Composed of an exclusive formula consisting of laminated aluminized foil, high-density polymer films and a thick layer of rubberized asphalt, Peel & Seal? provides a long-lasting, durable, maintenance-free roofing surface.
|
Peel and Seal? is the original, self-stick roll roofing specifically designed for low slope residential and commercial applications. Composed of an exclusive formula Peel and Seal? provides a long-lasting, durable, maintenance-free roofing surface. From dormers, residential sunroom additions, open porches and mobile home roofs, to industrial and agricultural buildings where low slope roofs are common place, Peel and Seal? is an excellent solution for these applications. The self-adhering, weatherproof, reflective surface not only forms a highly effective barrier to the elements, but also limits solar heating to help keep the temperature of building interiors significantly cooler.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Peel & Seal? is the original, self-stick roll roofing specifically designed for low slope residential and commercial applications. Composed of an exclusive formula consisting of laminated aluminized foil, high-density polymer films and a thick layer of rubberized asphalt, Peel & Seal? provides a long-lasting, durable, maintenance-free roofing surface.
|
Peel & Seal? is the original, self-stick roll roofing specifically designed for low slope residential and commercial applications. Composed of an exclusive formula consisting of laminated aluminized foil, high-density polymer films and a thick layer of rubberized asphalt, Peel & Seal? provides a long-lasting, durable, maintenance-free roofing surface.
|
#30 felt replacement used for steep slope roofing designed for use under all primary roofing types including Asphalt Shingles, Synthetic Shingles, Metal roofing, Tiles, Slate and Cedar Shakes. 6X lighter and 20X stronger than #30 felt, Class A Fire ASTM E108, meets and exceeds ASTM D226 Types I & II and D4689 Types II & IV, Class 4 hail rating, ICC ES Approved: synthetic construction inert to mold growth, Patented "Sure-Foot?" slip resistant nodular walking surface, contributes to "LEED" points, certified minimum of 20% reclaimed content (100% recyclable), all temperature performance -40 to 240 deg F, 6 month UV exposure, cool light gray surface doesn't expand or contract, dual logo custom printing available, Roll size of10 sq or 93 sq-m.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Saturated utility felt is a uniform, flexible felt of organic fibers, impregnated with an asphalt saturant. Used as an underlay beneath asphalt shingles, wood shakes, tiles and other sloped coverings. Meets ASTM 4869 Type I standard. 30RF has twice the thickness of 15RF. Approximately 36 lb per roll.
|
Saturated utility felt is a uniform, flexible felt of organic fibers, impregnated with an asphalt saturant. Used as an underlay beneath asphalt shingles, wood shakes, tiles and other sloped coverings. Meets ASTM 4869 Type I standard. 30RF has twice the thickness of 15RF. Approximately 36 lb per roll.
|
Constructed from fiberglass mat, impregnated and coated with hot asphaltic saturant, then coated on the weather side with mineral granules in a 36 in wide path. This forms a 36 in wide mineral surfaced roll. For use with low-sloped roofs. 90# can be used as an underlayment and a final cap sheet. 108 square foot coverage. 50 mil thickness.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Constructed from fiberglass mat, impregnated and coated with hot asphaltic saturant, then coated on the weather side with mineral granules in a 36 in wide path. This forms a 36 in wide mineral surfaced roll. For use with low-sloped roofs. 90# can be used as an underlayment and a final cap sheet. 108 square foot coverage. 50 mil thickness.
|
Constructed from fiberglass mat, impregnated and coated with hot asphaltic saturant, then coated on the weather side with mineral granules in a 36 in wide path. This forms a 36 in wide mineral surfaced roll. For use with low-sloped roofs. 90# can be used as an underlayment and a final cap sheet. 108 square foot coverage. 50 mil thickness.
|
A general-purpose economical choice roll roofing product that can be used with cold adhesives or hot mopping applications for low slope roofs, manufactured from fiberglass mat and it's coated on both sides of the fiberglass mat with weathering-grade asphalt and is covered on the top with ceramic mineral slate surface granules.
|
|
|
