|
|
|
|
|
|
|
|
|
|
|
|
|
|
Single track adjustable wall standard. Dimensions of 5/8 in W x 24 in H x selected length. For use with ProSource shelving. UPC tagged.
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2 in centers. 23 ga high-strength steel with a dimension of 5/8 in W x 3/16 in D.
|
High-strength steel 36 in mortise-mount pilaster standard features 1/2 in vertical slot adjustability and countersunk nail, screw and staple holes. Numbered slots provide quick, accurate clip insertion. System holds up to 500 lb per shelf when properly installed. Can be installed on the surface or made flush with the wall or cabinet by making a dado cut.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2 in centers. 23 ga high-strength steel with a dimension of 5/8 in W x 3/16 in D.
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2 in centers. 23 ga high-strength steel with a dimension of 5/8 in W x 3/16 in D.
|
High-strength steel 36 in mortise-mount pilaster standard features 1/2 in vertical slot adjustability and countersunk nail, screw and staple holes. Numbered slots provide quick, accurate clip insertion. System holds up to 500 lb per shelf when properly installed. Can be installed on the surface or made flush with the wall or cabinet by making a dado cut.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Single track adjustable wall standard. Dimensions of 5/8 in W x 36 in H x selected length. For use with ProSource shelving. UPC tagged.
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2 in centers. 23 ga high-strength steel with a dimension of 5/8 in W x 3/16 in D.
|
Features twice the slots for more strength. Two 10-1/2 in brackets mounted to twin-slotted standards support up to 300 lb per shelf when installed according to manufacturer's directions.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with the 180 series brackets. Standards can be mounted to nearly any type of wall. Reinforced brackets lock into slotted standard for strong, secure weight bearing support. Fully adjustable 1 in increments. 16 ga steel construction. Dimensions of 5/8 in W x 13/32 in H x selected length.
|
Knape & Vogt Joist Bracket, 600 lb Weight, Steel, Galvanized
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2 in centers. 23 ga high-strength steel with a dimension of 5/8 in W x 3/16 in D.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2 in centers. 23 ga high-strength steel with a dimension of 5/8 in W x 3/16 in D.
|
High-strength steel 48 in mortise-mount pilaster standard features 1/2 in vertical slot adjustability and countersunk nail, screw and staple holes. Numbered slots provide quick, accurate clip insertion. System holds up to 500 lb per shelf when properly installed. Can be installed on the surface or made flush with the wall or cabinet by making a dado cut.
|
Knape & Vogt Fast-Mount Hook, Heavy-Duty, Galvanized
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2 in centers. 23 ga high-strength steel with a dimension of 5/8 in W x 3/16 in D.
|
Single track adjustable wall standard. Dimensions of 5/8 in W x 48 in H x selected length. For use with ProSource shelving. UPC tagged.
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2 in centers. 23 ga high-strength steel with a dimension of 5/8 in W x 3/16 in D.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2 in centers. 23 ga high-strength steel with a dimension of 5/8 in W x 3/16 in D.
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2 in centers. 23 ga high-strength steel with a dimension of 5/8 in W x 3/16 in D.
|
Adjustable dual track, 1 piece. Dimensions of 1 in W x 25-1/2 in L. For use with ProSource shelving. UPC tagged.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High-strength steel 96 in mortise-mount pilaster standard features 1/2 in vertical slot adjustability and countersunk nail, screw and staple holes. Numbered slots provide quick, accurate clip insertion. System holds up to 500 lb per shelf when properly installed. Can be installed on the surface or made flush with the wall or cabinet by making a dado cut.
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2 in centers. 23 ga high-strength steel with a dimension of 5/8 in W x 3/16 in D.
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2 in centers. 23 ga high-strength steel with a dimension of 5/8 in W x 3/16 in D.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Adjustable dual track, 1 piece. Dimensions of 1 in W x 48 in H. For use with ProSource shelving. UPC tagged.
|
Horizontal track to hang uprights, load tested to 400 lb per screw on wall studs. Tested to 100 lb per anchor on dry wall mount.
|
This 72 in standard features a single slot design with 1 in vertical slot adjustability. For use with the 180 Series brackets. Brass-look finish.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Single track adjustable wall standard. Dimensions of 5/8 in W x 72 in H x selected length. For use with ProSource shelving. UPC tagged.
|
For use with the 180 series brackets. Standards can be mounted to nearly any type of wall. Reinforced brackets lock into slotted standard for strong, secure weight bearing support. Fully adjustable 1 in increments. 16 ga steel construction. Dimensions of 5/8 in W x 13/32 in H x selected length.
|
High-strength steel 96 in mortise-mount pilaster standard features 1/2 in vertical slot adjustability and countersunk nail, screw and staple holes. Numbered slots provide quick, accurate clip insertion. System holds up to 500 lb per shelf when properly installed. Can be installed on the surface or made flush with the wall or cabinet by making a dado cut.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Mounts to the wall for surface or flush mounted applications. Predrilled nail and screw holes. Use with 158 shelf supports. Dimensions of 5/8 in W x 3/16 in D. Boxed loose barcoded.
|
Features twice the slots for more strength. Two 10-1/2 in brackets mounted to twin-slotted standards support up to 300 lb per shelf when installed according to manufacturer's directions.
|
Adjustable dual track, 1 piece. Dimensions of 1 in W x 70.5 in L. For use with ProSource shelving. UPC tagged.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Can be used as hang standard or wall standard. Double notch design for sturdy bracket installation. Install directly to wall studs, concrete or drywall.
|
Knape & Vogt Shelf Standard, Heavy-Duty, Galvanized, 24 in Length, 3-3/4 in Width
|
For use with the 180 series brackets. Standards can be mounted to nearly any type of wall. Reinforced brackets lock into slotted standard for strong, secure weight bearing support. Fully adjustable 1 in increments. 16 ga steel construction. Dimensions of 5/8 in W x 13/32 in H x selected length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with the 180 series brackets. Standards can be mounted to nearly any type of wall. Reinforced brackets lock into slotted standard for strong, secure weight bearing support. Fully adjustable 1 in increments. 16 ga steel construction. Dimensions of 5/8 in W x 13/32 in H x selected length.
|
For use with the 180 series brackets. Standards can be mounted to nearly any type of wall. Reinforced brackets lock into slotted standard for strong, secure weight bearing support. Fully adjustable 1 in increments. 16 ga steel construction. Dimensions of 5/8 in W x 13/32 in H x selected length.
|
Can be used as Hang Standard or Wall Standard. Double notch design for sturdy bracket installation. Install directly to wall studs, concrete or drywall.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with the 180 series brackets. Standards can be mounted to nearly any type of wall. Reinforced brackets lock into slotted standard for strong, secure weight bearing support. Fully adjustable 1 in increments. 16 ga steel construction. Dimensions of 5/8 in W x 13/32 in H x selected length.
|
For use with the 180 series brackets. Standards can be mounted to nearly any type of wall. Reinforced brackets lock into slotted standard for strong, secure weight bearing support. Fully adjustable 1 in increments. 16 ga steel construction. Dimensions of 5/8 in W x 13/32 in H x selected length.
|
For use with the 180 series brackets. Standards can be mounted to nearly any type of wall. Reinforced brackets lock into slotted standard for strong, secure weight bearing support. Fully adjustable 1 in increments. 16 ga steel construction. Dimensions of 5/8 in W x 13/32 in H x selected length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with the 180 series brackets. Standards can be mounted to nearly any type of wall. Reinforced brackets lock into slotted standard for strong, secure weight bearing support. Fully adjustable 1 in increments. 16 ga steel construction. Dimensions of 5/8 in W x 13/32 in H x selected length.
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2 in centers. 23 ga high-strength steel with a dimension of 5/8 in W x 3/16 in D.
|
For use with the 180 series brackets. Standards can be mounted to nearly any type of wall. Reinforced brackets lock into slotted standard for strong, secure weight bearing support. Fully adjustable 1 in increments. 16 ga steel construction. Dimensions of 5/8 in W x 13/32 in H x selected length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with the 180 series brackets. Standards can be mounted to nearly any type of wall. Reinforced brackets lock into slotted standard for strong, secure weight bearing support. Fully adjustable 1 in increments. 16 ga steel construction. Dimensions of 5/8 in W x 13/32 in H x selected length.
|
For use with the 180 series brackets. Standards can be mounted to nearly any type of wall. Reinforced brackets lock into slotted standard for strong, secure weight bearing support. Fully adjustable 1 in increments. 16 ga steel construction. Dimensions of 5/8 in W x 13/32 in H x selected length.
|
For use with the 180 series brackets. Standards can be mounted to nearly any type of wall. Reinforced brackets lock into slotted standard for strong, secure weight bearing support. Fully adjustable 1 in increments. 16 ga steel construction. Dimensions of 5/8 in W x 13/32 in H x selected length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Knape & Vogt Shelf Standard, Heavy-Duty, Galvanized, 48 in Length, 3-3/4 in Width
|
Features twice the slots for more strength. Two 10-1/2 in brackets mounted to twin-slotted standards support up to 300 lb per shelf when installed according to manufacturer's directions.
|
Features twice the slots for more strength. Two 10-1/2 in brackets mounted to twin-slotted standards support up to 300 lb per shelf when installed according to manufacturer's directions.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Features twice the slots for more strength. Two 10-1/2 in brackets mounted to twin-slotted standards support up to 300 lb per shelf when installed according to manufacturer's directions.
|
Can be used as hang standard or wall standard. Double notch design for sturdy bracket installation. Install directly to wall studs, concrete or drywall.
|
Knape & Vogt HEAVYWEIGHT Hang Track, 400 lb Weight, Wall Mounting, Steel, Platinum, 2 in Width, 40 in Height, 0.4 in Depth, Suitable for: 0201 Series Standard and Heavy-Duty Shelving Systems
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with the 180 series brackets. Standards can be mounted to nearly any type of wall. Reinforced brackets lock into slotted standard for strong, secure weight bearing support. Fully adjustable 1 in increments. 16 ga steel construction. Dimensions of 5/8 in W x 13/32 in H x selected length.
|
For use with the 180 series brackets. Standards can be mounted to nearly any type of wall. Reinforced brackets lock into slotted standard for strong, secure weight bearing support. Fully adjustable 1 in increments. 16 ga steel construction. Dimensions of 5/8 in W x 13/32 in H x selected length.
|
For use with the 180 series brackets. Standards can be mounted to nearly any type of wall. Reinforced brackets lock into slotted standard for strong, secure weight bearing support. Fully adjustable 1 in increments. 16 ga steel construction. Dimensions of 5/8 in W x 13/32 in H x selected length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with the 180 series brackets. Standards can be mounted to nearly any type of wall. Reinforced brackets lock into slotted standard for strong, secure weight bearing support. Fully adjustable 1 in increments. 16 ga steel construction. Dimensions of 5/8 in W x 13/32 in H x selected length.
|
For use with the 180 series brackets. Standards can be mounted to nearly any type of wall. Reinforced brackets lock into slotted standard for strong, secure weight bearing support. Fully adjustable 1 in increments. 16 ga steel construction. Dimensions of 5/8 in W x 13/32 in H x selected length.
|
Can be used as hang standard or wall standard. Double notch design for sturdy bracket installation. Install directly to wall studs, concrete or drywall.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Features twice the slots for more strength. Two 10-1/2 in brackets mounted to twin-slotted standards support up to 300 lb per shelf when installed according to manufacturer's directions.
|
Features twice the slots for more strength. Two 10-1/2 in brackets mounted to twin-slotted standards support up to 300 lb per shelf when installed according to manufacturer's directions.
|
Features twice the slots for more strength. Two 10-1/2 in brackets mounted to twin-slotted standards support up to 300 lb per shelf when installed according to manufacturer's directions.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Knape & Vogt Shelf Standard, Heavy-Duty, Galvanized, 72 in Length, 3-3/4 in Width
|
Provides standard installation, ensures even, level shelving surface. Mount directly to wall studs, concrete or drywall. Allows wire shelves to be adjusted to any height.
|
Durable finish, solid steel construction. Diamond plate stamped surface.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Features twice the slots for more strength. Two 10-1/2 in brackets mounted to twin-slotted standards support up to 300 lb per shelf when installed according to manufacturer's directions.
|
Features twice the slots for more strength. Two 10-1/2 in brackets mounted to twin-slotted standards support up to 300 lb per shelf when installed according to manufacturer's directions.
|
Can be used as hang standard or wall standard. Double notch design for sturdy bracket installation. Install directly to wall studs, concrete or drywall.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Features twice the slots for more strength. Two 10-1/2 in brackets mounted to twin-slotted standards support up to 300 lb per shelf when installed according to manufacturer's directions.
|
Features twice the slots for more strength. Two 10-1/2 in brackets mounted to twin-slotted standards support up to 300 lb per shelf when installed according to manufacturer's directions.
|
Provides standard installation, ensures even, level shelving surface. Mount directly to wall studs, concrete or drywall. Allows wire shelves to be adjusted to any height.
|
|
|
