|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops.
|
Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops.
|
Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops.
|
Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops.
|
Factory lubricated, steel inner race. Fits 2 in standard J-track. Roller 1-7/8 in OD.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy-duty galvanized steel pulley with galvanized steel strap. Case hardened steel race with steel ball bearings. Factory lubricated and can be used at stationary or spring pulley positions. The width of the groove measures 5/16 in from inside wall to inside.
|
Used on side by side hinge placements for added strength. Factory lubricated, steel inner race with 10 ball bearings. Roller 1-7/8 in OD.
|
Used by most garage door manufacturers. Roller tube accepts a standard 7/16 in OD stem roller. Made of 14 ga galvanized steel, 3 in OAW. Includes four 1/4 in-20 x 1-7/8 in pancake head carriage bolts with nuts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High-impact plastic for good performance and quiet, trouble-free operation in all weather environments. Roller 1-7/8 in OD.
|
Used by most garage door manufacturers. Roller tube accepts a standard 7/16 in OD stem roller. Made of 14 ga galvanized steel, 3 in OAW. Includes four 1/4 in-20 x 1-7/8 in pancake head carriage bolts with nuts.
|
Used by most garage door manufacturers. Roller tube accepts a standard 7/16 in OD stem roller. Made of 14 ga galvanized steel, 3 in OAW. Includes four 1/4 in-20 x 1-7/8 in pancake head carriage bolts with nuts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replaces most handles currently in use. Galvanized steel construction. Use vertically or horizontally. Includes two 1/4 in - 20 x 1-7/8 in pancake head carriage bolts with nuts.
|
Heavy-duty galvanized steel construction; accepts a 5/16 in square shaft locking handle, used by Frantz and others as a lever mechanism to disengage side latches.
|
Short stem heavy-duty roller with steel inner race, 10 ball bearings. Includes 2 roller assemblies. Roller 1-7/8 in OD.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Galvanized carbon steel aircraft cables used on extension spring doors. 1/8 in replaces most wood doors, 3/32 in replaces most fiberglass and aluminum doors.
|
Galvanized carbon steel aircraft cable used on 7 ft H torsion spring doors.
|
Factory lubricated, steel inner race. Fits 2 in standard J-track. Roller 1-7/8 in OD.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware Bolt and Nut, Ribbed Neck, Dimensions: 1/4 in Dia x 1/2 in L, Steel, Zinc, Suitable for: Fiberglass Garage Doors
|
Used on both wood and metal doors. Heavy-duty 13 ga galvanized steel construction and steel cable pin. Accepts a standard 7/16 in OD stem roller. Includes left and right hand brackets.
|
Factory lubricated, steel inner race. Fits 2 in standard J-track. Roller 1-7/8 in OD.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy-duty galvanized steel pulley with galvanized steel strap. Case hardened steel race with steel ball bearings. Factory lubricated and can be used at stationary or spring pulley positions. This pulley is designed to support steel cables up to 3/16 in Dia.
|
Heavy-duty galvanized steel, spring-loaded slide-bolt lock with latch bolt release lever for overhead garage doors. Used with GD-52147 outside lock and latch assembly.
|
Heavy-duty zinc die-cast housing with brass face and 5-pin tumbler lock. Used to key lock a variety of interior latching mechanisms. Can be purchased keyed-alike via special order to be used separately or with GD-52119 center mount deadbolt lock.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Galvanized carbon steel aircraft cable installs through extension springs to prevent injury in case of breakage. Required on California installations. Use 4 cables for dual spring doors.
|
Works only from inside for extra protection as a night or vacation security lock. Fits most garage doors. Engages slot in vertical track. 7/8 in W x 1/8 in thick steel slide bolt with heavy-duty galvanized steel housing. Includes lock assembly and four 1/4 in-20 x 1-7/8 in pancake-head carriage bolts with nuts.
|
Prime-Line Winding Rod, Hard Drawn Wire, Specifications: 1/2 in Diameter X 16 in Length, Steel
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy-duty galvanized steel pulley with galvanized steel strap case hardened steel race with steel ball bearings factory lubricated can be used at stationary or spring pulley positions. The width of the groove measures 5/16 in from inside wall to inside.
|
Heavy-duty galvanized steel fixture with adjustable roller plate, accepts a standard 7/16 in Dia stem roller, used on most wood doors.
|
Zinc die-cast construction, keyed lock, 5/16 in square shaft, 4-5/8 in long, 1-1/2 in hole centers, replaces many garage door, camper and R.V locking handles. Screws attach to lock from the inside of door. Contains 1 locking handle, 2 keys.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy-duty (10, 000 cycles) extension springs have double loop ends for extra durability. 5 sizes will replace most all spring configurations on residential doors that are no higher than 7 ft. 1/8 in galvanized carbon steel aircraft cable.
|
Prime-Line Garage Door Lock, Zinc, Zinc-Plated, Includes: (1) Die Cast Outside Handle with 5/16 in Square X 3 in Length Shaft, (1) Die Cast Zinc Inside Handle with Set Screws
|
5/16 in square shaft, 3 in L, replaces most garage door, camper and RV locking handles. Zinc die-cast construction. 1-1/2 in hole centers. Includes locking handle and 2 chrome-plated solid brass keys.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy-duty (10, 000 cycles) extension springs have double loop ends for extra durability. 5 sizes will replace most all spring configurations on residential doors that are no higher than 7 ft. 1/8 in galvanized carbon steel aircraft cable.
|
Heavy-duty (10, 000 cycles) extension springs have double loop ends for extra durability. 5 sizes will replace most all spring configurations on residential doors that are no higher than 7 ft. 1/8 in galvanized carbon steel aircraft cable.
|
Heavy-duty (10, 000 cycles) extension springs have double loop ends for extra durability. 5 sizes will replace most all spring configurations on residential doors that are no higher than 7 ft. 1/8 in galvanized carbon steel aircraft cable.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy-duty (10, 000 cycles) extension springs have double loop ends for extra durability. 5 sizes will replace most all spring configurations on residential doors that are no higher than 7 ft. 1/8 in galvanized carbon steel aircraft cable.
|
Painted die-cast inside lock with heavy-duty steel spring bolt, key cylinder has aluminum face and 5-pin tumbler lock with cylinder ring, will replace most locking mechanisms of this type.
|
Chamberlain Smart Garage Hub, 120 V, Wireless Technology: Wi-Fi, Wireless Connectivity, Black, Suitable for: Chamberlain, Craftsman, Genie, LiftMaster, Linear MegaCode, Overhead Door, Stanley SecureCode, Wayne Dalton Brands of Garage Door Openers
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Provides trusted, convenient walk-in access without using a remote control or key. Set up in seconds with easy-to-follow wireless programming and compatibility with nearly every Chamberlain?, LiftMaster? and Craftsman? garage door opener installed in North America. Advanced features such as a one-touch close button for efficient exits and a temporary PIN that can be programmed to allow limited-time access for deliveries or guests. Security+2.0?, the highest level of encryption, prevents hacking and provides peace of mind.
|
Works with all Chamberlain garage door openers from 1993 to present (any Chamberlain opener with Safety Sensors), opens 1, 2 or 3 door garages, enhanced range reaches from greater distances. Easy one-button programming sets up in minutes, red LED light lets you know your remote is working. Visor clip and battery included.
|
Compact version of the Chamberlain remote, small enough for a pocket, purse or keychain, great for bikers, walkers, latch-key kids or just an extra remote. Works with all Chamberlain garage door openers from 1993 to present (any Chamberlain opener with Safety Sensors). Opens 1, 2 or 3 door garages, easy on-button programming sets up in minutes, red LED light lets you know your remote is working. Visor clip included.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Versatile 2-button design is designed for in-vehicle use and reaches from greater distances; can operate up to two different brands of garage door openers by programming each garage door to a separate button; programming is easy through the Smart Learn button or up to 12-Dip Switch programs; programs wirelessly to the garage door opener and does not require you to cut into wiring or install an unsightly receiver in your garage; dual frequency, dual manufacturer design operates 1 or 2 garage doors even if they are different brands; excellent solution for anyone looking to replace a lost or stolen remote or to add a remote for multi-car families; some Smart Button models include "Linear", "Chamberlain", "Genie", "Overhead Door", "Stanley" and "Wayne Dalton"; some Dip Switch models include "Chamberlain", "Genie", "Linear", "Multicode", "Stanley" and "Moore-O-Matic".
|
Chamberlain Garage Door Remote Control, Number of Buttons: 2, Operating Range: 800 ft, Stainless Steel, Silver, Dimensions: 3.2 in H x 2.04 in W x 0.72 in D, Suitable for: Chamberlain, Craftsman, Genie, LiftMaster, Linear, Overhead Door and Stanley Garage Doors, Includes: Batteries
|
Heavy-duty (10, 000 cycles) extension springs have double loop ends for extra durability. 5 sizes will replace most all spring configurations on residential doors that are no higher than 7 ft. 1/8 in galvanized carbon steel aircraft cable.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Chamberlain Garage Door Remote Control, Number of Buttons: 2, Operating Range: 800 ft, Dimensions: 2.38 in H x 1.34 in W x 0.58 in D, Suitable for: Chamberlain, Craftsman, Genie and LiftMaster Garage Doors, Includes: Batteries
|
Includes 8 ft chain/cable assembly, rope, master link kit and 2 rail clips.
|
The backlit keypad provides visibility in any light to allow entry via a personal four-digit code. Set up in seconds with easy-to-follow wireless programming and universal frequency recognition of over 90% of all garage door openers installed in North America, including major brands such as Chamberlain?, LiftMaster?, Craftsman?, Genie? and many more. A ideal fit for active lifestyles, this keypad is a great complement to a traditional visor and/or compact personal remote. Includes 9V battery and instruction manual.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy-duty (10, 000 cycles) extension springs have double loop ends for extra durability. 5 sizes will replace most all spring configurations on residential doors that are no higher than 7 ft. 1/8 in galvanized carbon steel aircraft cable.
|
Genie's Wireless Garage Door Opener keypad system allows for easy access to your garage without the need for a remote or a physical key. This garage door keypad includes the added security of Genie Intellicode technology built right in. The initial setup is quick and easy; it takes only minutes to complete. The keypad flip-up cover protects the pin pad from the weather elements. The dkeypad cover included is white however ther are three additional colors of covers to choose from to best fit your desired look. Th ekypad features a backlight which means you can safely enter your code even at night. The included (2) AAA batteries are easy to change.
|
The popular G3T-R Genie 3-Button Garage Door Opener Remote features Genie Intellicode Security technology to keep your garage secure while you're home or away. The access code is changed on each door activation to prevent unauthorized access to your property. It is also equipped with Auto-Seek Dual Frequency technology, this garage door opener remote will automatically seek either 315 or 390 MHz, which will minimize interference from close surrounding devices and improves overall performance. The 3-Button G3T-R remote works up to 3 garage door opener systems manufactured from 1997 to the present.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The tube rail chain extension kit is to be used in conjunction with the 5 piece rail system for the Chain Drive 550, when the door measures 8 ft in height. The extension kit rail replaces the end section of the 5 piece tube rail system. Installation is easy with no additional assembly hardware. Extension kit cannot be used on the Chain Drive 500.
|
Most doors, in recent years, have been supplied with torsion springs that is located directly above the door and mounted to the header. Replacement will require the use of 2 winding rods (GD-52238) and a clear understanding of wire size and handing.
|
Most doors, in recent years, have been supplied with torsion springs that is located directly above the door and mounted to the header. Replacement will require the use of 2 winding rods (GD-52238) and a clear understanding of wire size and handing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Genie's Safe-T-Beam system is designed to ensure maximum safety for your garage door opener operation. Using an invisible infrared beam across the opening of the door, the Genie garage door safety sensor detects any object passing through the LED beam of light and automatically reverses the closing garage door keeping children and pets safe.
|
Replacement safety sensors for Chamberlain garage access systems. Fits Chamberlain garage access systems manufactured after 1997. Prevents garage door from closing on people, pets or other objects. Replaces damaged safety sensors. Includes two sensors and mounting brackets and hardware.
|
Plated die-cast handle and housing with 5/16 in square shaft, 3-1/8 in long, keyed lock with break-off spindle, works with GD-12138 slide lock.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Most doors, in recent years, have been supplied with torsion springs that is located directly above the door and mounted to the header. Replacement will require the use of 2 winding rods (GD-52238) and a clear understanding of wire size and handing.
|
Most doors, in recent years, have been supplied with torsion springs that is located directly above the door and mounted to the header. Replacement will require the use of 2 winding rods (GD-52238) and a clear understanding of wire size and handing.
|
Includes 8 ft belt assembly, rope, master link kit, spring nut assembly and 2 rail clips.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Most doors, in recent years, have been supplied with torsion springs that is located directly above the door and mounted to the header. Replacement will require the use of 2 winding rods (GD-52238) and a clear understanding of wire size and handing.
|
Most doors, in recent years, have been supplied with torsion springs that is located directly above the door and mounted to the header. Replacement will require the use of 2 winding rods (GD-52238) and a clear understanding of wire size and handing.
|
The tube rail belt extension kit is to be used in conjunction with the 5 piece rail system for the SilentMax 550 when the door measures 8 ft in height. The extension kit rail replaces the end section of the 5 piece tube rail system. Installation is easy with no additional assembly hardware.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Includes 8 ft chain/cable assembly, rope, master link kit and 2 rail clips.
|
Chamberlain Garage Door Opener, HP Rating: 1/2 hp, Remote Access, Drive System: Chain, 7 ft Rail Length, 1 Bulbs, Black/Navy/White, Operating System Compatibility: myQ and Security+ 2.0, Suitable for: 7 ft Garage Doors, Includes: (1) 3-Button Visor Garage Door Remote, (1) Safety Sensor Kit and (1) Pushbutton Door Control
|
The Genie Chain Drive 500 garage door opener offers the best in traditional chain drive garage door operation. Dependable and durable; the Chain Drive is an affordable option with superior design and performance. You can count on many years of worry-free service with almost no maintenance needed, The strong Genie DC motor suitable for residential garage doors up to 7 ft high and 350 lb in weight. You can expect smoother door travel and easier installation than most garage door openers at this price.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Genie Chain Drive 550 garage door opener combines powerful, reliable performancewith a smooth operation to create a long-lasting and easy-to-install garage door opener. The unit's electronic push-button programming makes installation and setup fast and easy. Complete with accessories, the system features a reliable DC motor that delivers quiet, smooth operation with soft start and stop dontrol, reducing wear and tear on the unit for long-lasting performance.
|
Chamberlain Garage Door Opener, HP Rating: 1/2 hp, Remote Access, Drive System: Chain, 7 ft Rail Length, 1 Bulbs, Blue, Operating System Compatibility: myQ and Security+ 2.0, Suitable for: 7 ft Garage Doors, Includes: (1) 3-Button Visor Garage Door Remote, (1) Safety Sensor Kit and (1) Pushbutton Door Control
|
Chamberlain Garage Door Opener, Battery Power Source, HP Rating: 1/2 hp, Remote Access, Drive System: Chain, 7 ft Rail Length, 1 Bulbs, Gray, Operating System Compatibility: myQ and Security+ 2.0, Suitable for: 7 ft Garage Doors, Includes: (1) 3-Button Visor Garage Door Remote, (1) Safety Sensor Kit, (1) Pushbutton Door Control and (1) Battery Backup System Replacement Battery
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Genie SilentMax 550 is an ultra-quiet garage door opener with a steel reinforced belt. The unit's electronic push-button programming makes installation and setup fast and easy. Complete with accessories, the system features a reliable DC motor that delivers quiet, smooth operation with a soft start and stop control, reducing the wear and tear on the unit for long-lasting performance.
|
Chamberlain Garage Door Opener, HP Rating: 1/2 hp, Remote Access, Drive System: Chain, 7 ft Rail Length, CFL Bulb, 2 Bulbs, Steel, Operating System Compatibility: myQ and Security+ 2.0, Suitable for: 7 ft Garage Doors, Includes: (1) 3-Button Visor Garage Door Remote, (1) Motion Detecting Wall Control Panel, (1) Safety Sensor Kit and (1) Wireless Keypad
|
Chamberlain Garage Door Opener, HP Rating: 1/2 hp, Remote Access, Drive System: Belt, 7 ft Rail Length, CFL Bulb, 2 Bulbs, Gray, Steel, Operating System Compatibility: myQ and Security+ 2.0, Suitable for: 7 ft Garage Doors, Includes: (1) 3-Button Visor Garage Door Remote, (1) Motion Detecting Wall Control Panel, (1) Safety Sensor Kit and (1) Wireless Keypad
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Genie ChainMax 1000 garage door opener offers a durable 140v DC motor. The ChainMax garage door opener features a Genie enclosed C-Channel rail allowing for fluch-mounting capability and a clean appearance while ensuring the highest levels of safety and many years of reliable opeartion. Other safety features include the self-diagnostic GenieSense technology and the Safe-T-Beam system which helps prevent accidents with an infrared beam of light across the door opening. The DC motor operates powerfully and quietly with soft start and stop technology, making your door travel smoother.
|
The Genie ChainDrive 750 includes an integrated backup battery that operates this garage door opener up to 50 times after your power goes out. The heavy-duty chain drive system allows for long-lasting, durable operation. The 3/4 HPc DC motor will smoothly lift a sectional garage door up to 7 ft. in height and up to 500 lb. An extension kit is available (GenieEKTC) for 8 ft. high residential garage doors. Genie's SmartSet programming makes set-up fast and easy with just the simple push of a button. It features an easy to install 5-piece tube style rigid rail system that snaps together with no special hardware required.
|
The Genie ChainGlide Connect durable chain drive smart garage door opener that provides the ultimate combination of reliability and strength. This wifi garage door opener is packed with all of the latest technology at a reasonable price. The integrated Aladdin Connect Wifi smartphone technology allows your garage door to be part of your smart home. The Genie Aladdin Connect smartphone app is free and allows you to set up individual users through their own app and set up virtual keys to operate your garage door opener.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Chamberlain Garage Door Opener, HP Rating: 3/4 hp, Remote Access, Drive System: Belt, 7 ft Rail Length, LED Bulb, 1 Bulbs, Black, Steel, Operating System Compatibility: myQ and Security+ 2.0, Suitable for: 7 ft Garage Doors, Includes: (1) 3-Button Visor Garage Door Remote, (1) Wall Control Panel, (1) Safety Sensor Kit and (1) Wireless Keypad
|
Chamberlain Garage Door Opener, Battery Power Source, HP Rating: 1-1/4 hp, Remote Access, Drive System: Belt, 7 ft Rail Length, LED Bulb, Black, Operating System Compatibility: myQ and Security+ 2.0, Suitable for: 7 ft Garage Doors, Includes: (1) 3-Button Visor Garage Door Remote, (1) Wireless Keypad, (1) Safety Sensor Kit, (1) Wall Control Panel and (1) Battery
|
Chamberlain Garage Door Opener, 120 VAC, Frequency Rating: 60 Hz, Opener Type: Direct Drive, Drive Type: Direct, Includes: 3-Button Visor Garage Door Remote, Safety Sensor Kit
|
|
|
