|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to reinforce doorways against forced entry by providing secure placement of 2 x 4 in lumber against entry side of door. 2 x 4 in must be slid through the bar holders. Clearance for 1/4 in bolts. Manufactured from hot rolled steel.
|
Used to reinforce doorways against forced entry by providing secure placement of 2 x 4 in lumber against entry side of door. 2 x 4 in must be slid through the bar holders. Clearance for 1/4 in bolts. Manufactured from hot rolled steel.
|
Used to reinforce doorways against forced entry by providing secure placement of 2 x 4 in lumber against entry side of door. 2 x 4 in must be slid through the bar holders. Clearance for 1/4 in bolts. Manufactured from hot rolled steel.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
With bolt, nut and washer. Pack loose.
|
Used to reinforce doorways against forced entry by providing secure placement of 2 x 4 in lumber against entry side of door. 2 x 4 in must be slid through the bar holders. Clearance for 1/4 in bolts. Manufactured from hot rolled steel.
|
Designed as a support bracket for Stanley's 105270, 105676, 105213 and 105726 box rail at 24 in OC intervals. Includes lags. Display packed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for use as a door stop on up to 2 in thick sliding doors. Embossed steel for added strength. Display packed.
|
Designed to support double run of #5114 or #5116 box rail. Suitable for use on corrugated metal siding due to narrow surface. Does not come with rail bracket or fasteners. Can be used as double stop when used with #6008 door stop. 300 lb. Safe working load.
|
Designed to be used with #5400 round rail to join and hold two lengths of rail together. Includes lag bolt and spice screws. Splice screws are inserted in holes at the end of round rail. Safe working load 300 lb.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed to join two pieces of Stanley's 105270, 105676, 105213 and 105726 box rail. Meets ANSI/BHMA A 156.14. Includes lags.
|
Without screws. Each loose.
|
National Hardware Box Rail Bracket, Galvanized Steel, Dimensions: 4-7/8 in L x 1-1/2 in W x 3-15/32 in H, Suitable for: #5114 or #5116 Box Rail, Includes: (2) Lag Bolts
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for use as a heavy-duty guide on large, sliding doors up to 3-3/4 in thick. Slots in frame provide adjustment for holding doors against wood walls or posts. Delrin wheel is reversible; it can be used either side of frame. Offers sturdy steel frame construction. Meets ANSI/BHMA A 156.14. Roller is adjustable. Includes nail and lag screw holes. Hardened steel bolt for greater strength. Display packed.
|
Packed with wheel trucks only. Durable one piece, precision formed steel. Comes with self-lubricating Delrin bearings. Suitable for use with No 59, 5100, 5103, 5104, 5105, 5110, 5114 or 5116 box rail. 225 lb/hanger safe working load, 2.14 in diameter. 4.15 in L x 3 in W x 1.61 in D. Standards: BHMA A138.18 specified.
|
Boxed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed to hold wood and metal doors firmly in place against the door jamb on farm and utility buildings. It also can be used for end gates on stake trucks. Offers 7 in hook. Designed for right- or left-hand applications. Pre-punched, reversible strike plate for use on 1-1/2 in or 3-1/2 in thick door frames. Boxed.
|
National Hardware COLORmaxx Single Axle Box Rail Hanger, Specifications: 150 Safe Working Load, Steel, Zinc, Dimensions: 3.12 in L x 2.149 in W x 1.5 in H
|
Designed for bi-parting wood sliding doors at least 1-1/2 in thick. Cam action and adjustable hook holds doors tightly together. Pre-punched, reversible strike plate for use on 1-1/2 in or 3-1/2 in thick door frames. 15 in long hook. Boxed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed to press into rail to keep rail free of foreign materials from birds or weather. Can be used as center stop using 3/8 x 2 in carriage bolts (not furnished). Often packed with box hangers.
|
Designed for use on wood-frame, metal-clad doors using a 2 x 4 in or 2 x 6 in frame with Stanley's 105270, 105676, 105213 and 105726 box rail. Includes two washers, 4 hex nuts and two end caps per pair. Made of durable one-piece, precision-formed steel. Offers self-lubricating Delrin bearings. The 1/2 in offset bolt adjusts both vertically and laterally from inside door. Connecting bolt threaded 7 in adjusted laterally 1 in by turning offset bolt for desired clearance. Can hold 450 lb per pair. 9 in bolt. Boxed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for use on doors weighing up to 450 lb. Rail drilled 24 in OC for brackets. Can be used with many types of single and multiple brackets. Screws included. Meets ANSI/BHMA A 156.14, Grade 1. Rail is formed to give an even tread to hanger wheels.
|
Designed for use with box rail. For use with #59, #5100, #5103, #5104, #5105, #5110, #5114 or #5116 box rail. Includes truck, connecting bolt and nuts. Packed without end caps. Made of durable one-piece, precision-formed steel. Comes with self-lubricating Delrin bearings. Safe working load - 225 lb per hanger. 2.14 in roller diameter. 4-1/2 in bolt length, 4.49 in overall length, 1.61 in overall height. BHMA A138.18.
|
National Hardware Box Rail Hanger, Steel, Zinc, Suitable for: #59, #5100, #5103, #5104, #5105, #5110, #5114 or #5116 Box Rail, Includes: Connecting Bolt and Nuts, Truck
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware Rail Hanger, 6 in, 225 lb Weight, Dimensions: 2 in L x 3 in W x 2 in H, Steel, Zinc, Suitable for: Model #59, #5100, #5103, #5104, #5105, #5110, #5114 or #5116 Box Rail, Includes: Truck, Connecting Bolt, Nuts
|
Rigid with single door strap. Designed for use on wood-frame sliding doors from 1-1/2 in to 2 in thick. Slot in top of door strap allows lateral and vertical adjustment. 450 pound capacity per pair. Packed with two end caps and bolts for attaching door strap. Made of durable one-piece, precision-formed steel and has self-lubricating Delrin bearings. Boxed.
|
National Hardware Rail Hanger, 300 lb Weight, Bearing Type: Roller, Roller Width: 1.61 in, Roller Diameter: 2.14 in, Shaft Diameter: 0.42 in, Steel, Zinc, Dimensions: 5.38 in L x 4.51 in W x 1.61 in H, Suitable for: #59, #5100, #5103, #5104, #5105, #5110, #5114 or #5116 Box Rails
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for use on doors weighing up to 450 lb. Rail drilled 24 in OC for brackets. Can be used with many types of single and multiple brackets. Screws included. Meets ANSI/BHMA A 156.14, Grade 1. Rail is formed to give an even tread to hanger wheels.
|
Flexible with single door strap. Designed for use on wood-frame sliding doors from 1-1/2 to 2 in Thick. Slot in top of door strap allows lateral and vertical adjustment. 450 pounds capacity per pair. Packed with two end caps and bolts for attaching door strap. Made of durable one-piece, precision-formed steel and has self-lubricating Delrin bearings. Boxed.
|
National Hardware Box Rail Hanger, 300 lb Weight, Dimensions: 6 in, Steel, Zinc, Suitable for: #59, #5100, #5103, #5104, #5105, #5110, #5114, #5116 Box Rail, Includes: 6 in Bolts, Nuts
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for use with box rail on wood-frame, metal-clad door using a 2 x 4 in or 2 x 6 in frame. For use with #59, #5100, #5103, #5104, #5105, #5110, #5114 or #5116 box rail. Packed with four washers, four hex nuts and two end caps per pair. 1/2 in offset bolt adjusts both vertically and laterally from inside door. Connecting bolt threaded 7 in adjusts laterally 1 in by turning offset bolt for desired clearance. Durable one-piece, precision formed steel. Each hardened axle has 12 hardened and precision-ground alloy steel roller-bearings. Delrin seals keep out dirt while holding in long-life grease. Safe working load - 300 lb per hanger. 9 in bolt.
|
Designed for mounting #5114 or #5116 box rail. Includes 2 lag bolts, carriage bolt and nut. BHMA A138.18. Suitable for use on corrugated metal siding due to narrow mounting surface on sliding door systems. Adjustable to bring rail closer or further away from building. 300 lb safe working load. 7.12 in L x 3.25 in W x 2 in D. Can be used with flashing with the 5151 flashing bracket. One splice bracket should be installed on every length of rail to lock it in place.
|
Designed for use on doors weighing up to 450 lb. Rail drilled 24 in OC for brackets. Can be used with many types of single and multiple brackets. Screws included. Meets ANSI/BHMA A 156.14, Grade 1. Rail is formed to give an even tread to hanger wheels.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware 5055 Box Rail Hanger, Steel, Zinc, Suitable for: #59, #5100, #5103, #5104, #5105, #5110, #5114 or #5116 Box Rail On Wood-Frame Sliding Doors From 1-1/2 to 2 in Thick
|
National Hardware Rail Hanger, 5 in, 300 lb Weight, Steel, Zinc
|
Designed to be used with #5400 round rail to mount double runs of rail for by-passing doors to side of building installation. Includes lag bolt, (2) carriage bolts and (2) nuts. (1) Bracket should be installed every 2 ft of rail. Suitable for use on corrugated metal siding due to narrow mounting surface.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for single sliding or bi-parting metal or wood doors. Intended to take abuse from trucks, tractors and farm machinery when used around factory and farm buildings. Smooth ramp on each side of the guide prevents cutting tractor or truck tires. Mounts on concrete floors with lag screws and shields or on a 6 in x 6 in post. 1/2 in rod or bolt inserted through hole in each side will serve as a center stop for bi-parting doors. Meets ANSI/BHMA, A 156.14. Manufactured from hot-rolled steel. Boxed.
|
Designed for use with round rail on wood-frame, metal-clad doors using a 2 x 6 in top lateral. 1/2 in offset 9 in bolt (with 7 in thread) adjusts door vertically and laterally (1 in) from inside building. Flexible trunnion design resists door damage. Precision-ground and hardened steel roller bearings, axles and sleeves provide longer life and easier operation. Interchangeable with other brands of round rail. Safe working load - 300 lb per hanger.
|
Rigid with 2-51F and 1-51G brackets with lag. Designed for use on wood-frame sliding doors from 1-1/2 in to 2 in thick. Slot in top of door strap allows lateral and vertical adjustment. 1 pair 5005 box rail hangers, 450 pound capacity per pair. Packed with two end caps and bolts for attaching door strap. Made of durable one-piece, precision-formed steel and has self-lubricating Delrin bearings.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed to support a double run of #5114 or #5116 box rail. 1 Bracket should be installed every 2 ft of rail. Includes lag bolt. 300 lb. Safe working load.
|
Designed for use on doors weighing up to 450 lb. Rail drilled 24 in OC for brackets. Can be used with many types of single and multiple brackets. Screws included. Meets ANSI/BHMA A 156.14, Grade 1. Rail is formed to give an even tread to hanger wheels.
|
Designed for use with round rail on wood-frame, metal-clad doors using a 2 x 6 in top lateral. 1/2 in offset 9 in bolt (with 7 in thread) adjusts door vertically and laterally (1 in) from inside building. Flexible trunnion design resists door damage. Precision-ground and hardened steel roller bearings, axles and sleeves provide longer life and easier operation. Interchangeable with other brands of round rail. Safe working load - 300 lb per hanger.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for use with box rail on wood-frame or metal clad doors using a 2 x 4 in or 2 x 6 in frame. For use with #59 or #5110 box rail. Packed with two washers, 4 hex nuts and two end caps per pair, seventeen 3/8 x 2-1/2 in lag bolts also are included for mounting rail. Durable one piece, precision formed steel. Comes with self-lubricating Delrin bearings. 1/2 in offset bolt adjusts both vertically and laterally from inside door. Connecting bolt threaded 6 in adjusts laterally 1 in by turning offset bolt for desired clearance. Safe working load - 225 lb per hanger. 9 in bolt.
|
National Hardware Box Rail Hanger, 225 lb Weight, Mounting Hole Size: 1/2 in, Dimensions: 4.51 in W, Steel, Zinc, Suitable for: #59, #5100, #5103, #5104, #5105, #5110, #5114, #5116 Box Rail, 1-1/2 to 2 in Thick Sliding Frame Doors, Includes: (2) End Caps, Bolts
|
Designed for use with box rail on wood-frame sliding doors from 1-1/2 to 2 in Thick. For use with #5114 and #5116 box rail. Packed with bolts for attaching door straps. Durable one piece, precision formed steel. Comes with self-lubricating Delrin bearings. Double door strap has opposing holes for bolt mounting. Safe working load - 225 lb. per hanger.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for doors weighing up to 600 lb. per panel. Can be used with various types of single and multiple brackets. Advanced rail design with flat top and sides for easier mounting and better stability. Self cleaning and smoother operation. Interchangeable with other brands of round rail. Manufactured from galvanized steel.
|
Designed for use with box rail on wood-frame sliding doors from 1-1/2 to 2 in Thick. For use with #59 or #5110 box rail. Packed with nine 3/8 x 2 in lag screws for mounting rail and two end caps. Hangers have vertical and lateral adjustments that can be made from outside building. Durable one-piece, precision formed steel. Comes with self-lubricating Delrin bearings. 1/2 in offset bolt is threaded 5-1/2 in with a lateral adjustment of 1 in by turning bolt. Safe working load - 225 lb. per hanger.
|
National Hardware Box Rail Hanger, 300 lb Weight, Steel, Zinc, Suitable for: #59, #5100, #5103, #5104, #5105, #5110, #5114, #5116 Box Rail, 1-1/2 to 2 in Thick Sliding Frame Doors, Includes: (2) End Caps, Bolts
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for mounting #5114 or #5116 box rail. Includes 2 lag bolts, carriage bolt and nut. BHMA A138.18. Suitable for use on corrugated metal siding due to narrow mounting surface on sliding door systems. Adjustable to bring rail closer or further away from building. 300 lb safe working load. 7.12 in L x 3.25 in W x 2 in D. Can be used with flashing with the 5151 flashing bracket.
|
Designed for use with #5430, #5433, #5460 and #5465 round rail. Unique collar design supports the end of two rails while not interfering with flat mounting surface of rail. Fasteners are not required. Can be installed after rail is mounted to building. Rail bracket spacing holds collar in place.
|
With slots for 5120 flashings. Boxed loose.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware Double Splice Bracket, Specifications: 300 lb Working Capacity, Steel, Galvanized, Suitable for: #5114 or #5116 Double Run Box Rail, Includes: (2) Carriage Bolts, (4) Lag Bolts and (2) Nuts
|
Designed for doors weighing up to 600 lb. per panel. Can be used with various types of single and multiple brackets. Advanced rail design with flat top and sides for easier mounting and better stability. Self cleaning and smoother operation. Interchangeable with other brands of round rail. Manufactured from galvanized steel.
|
600 lb capacity. Pair flexible with door strap. Boxed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware Box Rail Bracket, Double, 300 lb Weight, Dimensions: 4-25/32 in L x 1-3/4 in W x 8-1/16 in H, Steel, Galvanized, Suitable for: #5114, #5116 Box Rail, Includes: Lag Bolt, (2) 3/8 x 2 in, Lag Screws
|
Designed to be used with #5400 round rail to mount rail to side of building. Includes lag bolt. (1) Bracket should be installed every 2 ft of rail. Safe working load 300 lb.
|
Adjustable from 2-1/2 in to 3-1/8 in. Pack loose.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for doors weighing up to 600 lb. per panel. Can be used with various types of single and multiple brackets. Advanced rail design with flat top and sides for easier mounting and better stability. Self cleaning and smoother operation. Interchangeable with other brands of round rail. Manufactured from galvanized steel.
|
National Hardware Face Mount Box Rail, 8 ft L, Door Weight: 450 lb, Steel, Galvanized
|
National Hardware Face Mount Box Rail, 10 ft L, Door Weight: 450 lb, Steel, Galvanized
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware Face Mount Box Rail, 12 ft L, Door Weight: 450 lb, Steel, Galvanized
|
With mounting brackets, 600 pound capacity. Pack loose.
|
Designed for use on doors 1 in Thick with National #5430/5433 Trackmaster round rail and #5450/5455 flashing. Boxed loose.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Includes mounting/flashing brackets which are welded to the rail on 2 ft centers. Intended for doors weighing up to 450 lb per panel. Boxed loose.
|
With mounting brackets, 600 pound capacity. Pack loose.
|
Includes mounting/flashing brackets which are welded to the rail on 2 ft centers. Intended for doors weighing up to 450 lb per panel. Boxed loose.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for mounting a double run of #5114 or #5116 box rail. Includes 4 lag bolts, 2 carriage bolts and 2 nuts. Suitable for use on corrugated metal siding due to narrow mounting surface. 1 bracket should be installed every 2 feet of rail. Adjustable to bring rail closer or further away from building. Can be used with flashing with the 5151 flashing bracket. 300 lb. safe working load.
|
With mounting brackets, 600 pound capacity. Pack loose.
|
Includes mounting/flashing brackets which are welded to the rail on 2 ft centers. Intended for doors weighing up to 450 lb per panel. Boxed loose.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Side-mounted rail designed for use on doors up to 450 lb. Cover is spot welded to top of rail with weld spots painted to prevent rusting. Brackets are not required since the cover provides a continuous bracket. Rail can be mounted with lag screws. Weather resistant.
|
Side-mounted rail designed for use on doors up to 450 lb. Cover is spot welded to top of rail with weld spots painted to prevent rusting. Brackets are not required since the cover provides a continuous bracket. Rail can be mounted with lag screws. Weather resistant.
|
Side-mounted rail designed for use on doors up to 450 lb. Cover is spot welded to top of rail with weld spots painted to prevent rusting. Brackets are not required since the cover provides a continuous bracket. Rail can be mounted with lag screws. Weather resistant.
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for doors weighing up to 450 lb. One-piece, mounted design allows fast, simple installations without mounting brackets. Features a durable, white prefinished cover that is permanently welded to rail. Flashing pre-punched for attaching to 2 x 6 in track board with 2-1/2 in ring shank nails with neoprene washer.
|
|
|
