|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6565 is a white nylon floor guide for a single 1-3/8 in thick door. Often used on pocket doors as well as bi-pass door systems. Used by several door manufacturers.
|
N 6566 is a pocket door guide for 1-3/8 in thick doors. It is a universal fit used by many pocket door manufacturers. Made of stamped steel with nylon guide tips, it mounts onto the bottom of the pocket door opening and under the trim. It keeps the door from hitting side to side as it slides back and forth.
|
N 6567 is a set of 2 white nylon floor guides for a single door that is any thickness. Often used on pocket doors as well as bi-pass door systems. Used by several door manufacturers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 7015 is a set of left and right hand nylon pocket door guides that can be used for any thickness door. It is a universal fit used by many pocket door manufacturers that is screwed onto the jamb under the trim. It has slotted holes for adjustment in or out. It keeps the door from hitting side to side as it slides back and forth.
|
PD120P Pocket door guide set. Keeps pocket door centered in the opening, so it can easily slide without contacting the frame. Made of resistant nylon in white finish.
|
Johnson Hardware Door Edge Pull, Plate Size: 0.09 in, 0.62 in W, 2.94 in H, Aluminum, US3 Brass, Suitable for: 1-3/8 to 1-3/4 in Thick Doors
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PD118P allows the connection of two pocket door frames. Steel plates install on front & back of header for a sturdy connection.
|
N 7410 is a four wheeled pocket door roller assembly used on a double track that has a 1-5/8 in inside width with a 1-3/16 in center to center measurement. The four 1 in Dia nylon convex rollers provide a smooth, long-lasting, quiet operation and are affixed to an adjustable stamped steel housing that slides into a stamped steel mounting bracket. Used on a 1-3/8 in thick door and 80 lb.
|
N 6724 is a four roller pocket door roller assembly used on Kennaframe pocket doors and others. The four 23/32 in Dia nylon rollers are affixed to an adjustable spring loaded steel bracket. They ride in a double track mounted in the top of the pocket door opening. It has a dial-adjust wheel that makes it adjustable up to 3/8 in height. It can be used on pocket doors 1 in to 1-3/4 in thick and up to 100 lb. each.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Size of 3-7/8 in x 3/4 in x 1-5/8 in. Slim pak, polybagged.
|
PD113P 3-wheel hanger kit. 2 pack kit with acetate wheels for repairs of existing installation. Hardware for 1-door weighing 125 lb.
|
Heavy-duty hangers with 3 ball bearing equipped wheels for long, trouble free service - never needs lubrication. Height adjustable. 200 lb weight capacity. 1 x 3 in plate size.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware Pocket Door Hardware Kit, Plastic/Steel, Includes: (1) Bumper, (2) Floor Brackets, (2) Guides, (2) Mounting Plates, (2) Wall Brackets, (2) Wheel/Bracket Assemblies and All Nails and Screws Necessary For Assembly
|
N 7065 is a pocket door roller assembly used on Kennaframe, Crawford, Press-Rite and many other bi-fold door manufacturers. It is constructed of a nylon housing with 2 parallel 13/16 in ball bearing nylon rollers which provide for a smooth and quiet operation. This roller rides in a double "J" track and affixes to a stamped steel mounting bracket that clamps it into place after being adjusted to the correct height. This pocket door roller assembly is good for doors up to 100 lb.
|
N 6848 is a top, center mounted, adjustable, tricycle style roller assembly. The three 1 in flat durable nylon rollers provide a smooth, long-lasting quiet operation. They are attached to a stamped steel & nylon carriage mounted on top of a threaded steel rod. The threaded rod catches into a bracket that locks it in place. Used on Johnson Bi-pass & Pocket Closet Doors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PD119P 3-wheel hanger kit. 2 pack kit with ball bearing wheels for repairs of existing installation. Hardware for one door weighing 200 lb. Ball bearing wheels for smooth & quiet rolling.
|
The PD100 pocket door hardware & track kit is built for durability and long-time use. Comes with 3-wheel trolleys and the solid 72 in aluminum track can support doors up to 125 lb. Ideal for those who already have an existing frame and need hardware only.
|
A fast, convenient method of finishing a pocket door installation. Just cut to length and install. No ripping of special thickness stock. Presanded so finishing is a snap.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Track can be cut down to shorter lengths. Track mounting screws not included with track lengths.
|
HWSCR6340 soft close series is designed for pocket doors using aluminum box tracks. It's spring loaded 3-wheel trolley design will gently close doors up to 95 lb. Ball bearing trolleys roll smoothly and quietly for maintenance free operation for years. Comes with an additional trolley for retro fits.
|
Kit includes two 2020 hanger, one 1550 door guide, one 1513 door stop. For doors up to 400 lb.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware Pocket Door Hardware, Door Thickness: 3/4 to 1-3/4 in, Aluminum/Particle Board/Steel, Includes: (1) Header and Track Assembly, (4) Jamb Stiffeners, (2) Floor Brackets, (1) Door Guide Set, (2) Snap-in Door Plates, (2) Snap-in Hangers, (1) Bumper, (1) Wrench
|
The 1500 Series standard-duty pocket door frame is designed to carry heavy standard size doors (up to 125 lb each) in standard 2 x 4 timber or steel framed stud walls. The 1500 frame kit is packaged for easy transport and fast installation for either single door or converging door applications. The 1500 is a versatile frame and can be adapted for use in non-standard wall thicknesses, block masonry walls and can be cut down to accept any smaller size door size.
|
The 200PD is commercial-grade hardware ideally suited for heavy door applications where smooth, trouble-free operation and long life is a necessity. The 200PD is primarily designed for on-site pocket door fabrication but can be adapted for use in other various configurations and applications. The heavy-duty extruded aluminum I-beam track is made to precise specifications and zinc-plated ball bearing wheel hangers are manufactured with Johnson's assurance in mind. Heavy-gauge steel components are zinc-plated for a quality appearance.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The PD3068 pocket door frame kit is built for durability and long-time use. The 3-wheel trolleys feature ball bearing wheels for smooth quiet rolling and the solid aluminum track can support doors up to 200 lb. Kit comes knock down in a box which transports easily and assembles quickly. Comes ready for door widths of 36 in but, can be cut down to accommodate doors as wide as 24 x 80 in high. Wood components constructed of pine and designed for wall structures of 2x4. Combine two kits together by using the converging door kit (Sold separately).
|
The PD3080 pocket door frame kit is built for durability and long-time use. The 3-wheel trolleys feature ball bearing wheels for smooth quiet rolling and the solid aluminum track can support doors up to 200 lb. Kit comes knock down in a box which transports easily and assembles quickly. Comes ready for door widths of 36 in but, can be cut down to accommodate doors as wide as 24 x 96 in high. Wood components constructed of pine and designed for wall structures of 2x4. Combine two kits together by using the converging door kit (Sold separately).
|
The 1500HD Series pocket door frame is designed to carry heavy solid core doors weighing up to 200 lb Ball bearing hanger wheels provide feather-touch door operation making the 1500HD one of the smoothest rolling pocket door installations available. The 1500 is designed to be quickly installed into prepared 2 x 4 timber frame stud walls however, the 1500 can also be adapted for use in various wall thicknesses and with various wall materials and structures. The 1500 frame kit is packaged for easy transport and fast installation for either single or converging 2 door applications and all frame sizes can be cut down to accommodate custom size doors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Marwin Pocket Door Frame, Weight Per Door: 200 lb, Door Thickness: 1 to 1-3/4 in, Rough Opening Size: 84-1/2 in, Wood, Suitable for: 6 ft 8 in Door
|
The 2000 Series pocket door frame is designed to carry heavy solid core doors (up to 400 lb each) in standard 2 x 4 timber or steel framed stud walls. The 2000 frame kit is packaged for easy transport and fast installation for either single door or converging door applications. The 2000 is a versatile frame and can be adapted for use in non-standard wall thicknesses, block masonry walls and can be cut down to accept any smaller size door size.
|
Marwin Pocket Door Frame, Weight Per Door: 200 lb, Door Thickness: 1 to 1-3/4 in, Rough Opening Size: 100-1/2 in, Wood, Suitable for: 8 ft Door
|
|
|
|
|
|
|
|
|
|
|
|
|
The 2000 Series pocket door frame is designed to carry heavy solid core doors (up to 400 lb each) in standard 2 x 4 timber or steel framed stud walls. The 2000 frame kit is packaged for easy transport and fast installation for either single door or converging door applications. The 2000 is a versatile frame and can be adapted for use in non-standard wall thicknesses, block masonry walls and can be cut down to accept any smaller size door size.
|
|
|
