|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used on Croft and Keller sliding screen doors. 1/4 in W x 3/8 in Dia flat nylon ball bearing wheel with 3/8 in threaded hex hub. Includes 2 rollers and 2 fasteners.
|
Non-handed, surface mount, economy pulls, plastic assembly. Contains one black inside pull, one black outside pull, #4 8 x 3/8 in Phillips flat head sheet metal screws. 1-7/8 in W x 4 in H.
|
Plastic roller with narrow center groove 7/32 in W nylon wheel, concave edge. Includes a 8-32 x 3/8 in machine screw with binder post nut. Fits on air control doors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This die-cast keeper or strike is used by many screen door manufacturers. It is 7/32 in wide with a 1/4 in deep projection. It has an downward hook and adjustment slots that allows it to be adjusted up or down to the correct position to engage the latch.
|
Bent spring design used by Academy Mfg. and others. Center grooved 5/16 in W wheel, 2-1/4 in L x 5/16 in W flat high-tension heat-treated steel spring and #8 x 3/8 in Phillips sheet metal screw.
|
Used by metal industries. Center grooved, 1/4 in W, roller. 1-3/4 in L, high-tension, heat-treated steel spring. Includes #8 x 3/8 in Phillips sheet metal screw.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Consists of 1/4 in W center groove wheel. Heat-treated, high-tension adjustable steel M-spring. Used by several patio door manufacturers.
|
1/4 in W center groove nylon wheel, high-tension 2-1/2 in L heat-treated steel spring and #8 x 3/8 in Phillips pan head sheet metal screw.
|
Non-handed; mortise installation, used by several door manufacturers. Includes one plastic inside and outside pull, one steel latch assembly, one plastic activator, one pop rivet and installation screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used as top and bottom roller. Plastic wheel with center groove. 1-7/8 in L housing. Heat-treated, high-tension steel spring and #8-32 x 1-1/4 in Phillips pan head screw.
|
Used as top and bottom roller by several patio door manufacturers. Consists of 1/4 in W center groove nylon wheel, 2 in L x 3/8 in W steel housing, high-tension heat-treated steel spring.
|
Plastic center grooved wheel with steel housing, high-tension steel spring. Fits on Columbia Uni-fit doors. Contents: 2 roller assemblies.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used by several door manufacturers for non-handed mortise installations. Sliding activator button designed for Jim Walters sliding roll-formed screen door. Includes black plastic inside pull and latch activator, black plastic outside pull, steel latch assembly, pop rivet and installation screws. 2-1/8 in W x 4-1/4 in H handles, 3-5/8 in CTC.
|
Used by several patio door manufacturers. Consists of 1/4 in W center groove wheel, high-tension heat-treated steel v-spring (2 in L before and 2 in L after bend).
|
For sliding glass doors. Center grooved, 5/16 in W steel ball bearing roller and steel inner race with 1/4 in - 20 x 3/4 in carriage bolt and 1/4 in - 20 hex nut.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Consists of 1/4 in W center groove wheel. Heat-treated, high-tension adjustable steel M-spring. Used by several patio door manufacturers.
|
Used by metal industries. Center grooved, 1/4 in W, roller. 1-3/4 in L, high-tension, heat-treated steel spring. Includes #8 x 3/8 in Phillips sheet metal screw.
|
Used on Peachtree sliding screen doors. All nylon roller assembly consists of center-grooved wheel and 1-5/32 in L x 13/16 in H x 7/16 in D housing. Includes #8 x 3/8 in Phillips pan head screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Flush mount fits into door stile. 1/16 in projection inside/outside of patio door. Reversible for right or left hand application. Packed with 4 different latch hooks to fit virtually all applications. For 1 to 1-1/4 in thick doors. 6-1/2 in distance between attaching screws.
|
Prime-Line Bug Seal, Vinyl, 7 in L, 3/4 to 1-3/8 in W
|
Used on Peachtree patio doors. Steel ball bearing roller, adjustable steel housing 2-1/4 in L x 1-9/16 in H x 17/8 in W. Contents: 1 roller assembly.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used by Crossly and other patio door manufacturers. Steel ball bearing roller and adjustable 2-5/16 in L x 1-1/8 in H x 11/16 to 9/16 in D die-cast housing assembly with 15/16 in flare width.
|
Nylon outer housing, aluminum inner housing with center grooved nylon wheel with adjustment cam. Contents: 2 roller assemblies, installation screws.
|
Cylinder Lock, 1-1/4 in, 5-pin tumbler lock with 2 keys, hardened break-away tailpiece. Used to keylock most surface mount handle sets. Keyway is compatible with Weiser, Kwikset & Weslock.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Steel ball bearing roller and adjustable steel housing assembly. Fits on Nu-Air, Bennings, Scotty and many other patio door manufacturers.
|
PL 15576 is a 96 in stainless steel track cap used to repair damaged patio or wardrobe door tracks. It can be cut to size. After the old track is prepared by grinding any spots that are wider than the original track width and cleaning it, the new track is simply pressed onto the old track after squirting a thin bead of silicone glue in the replacement track. Using a rubber mallet and a block of wood, the replacement track is snapped down over the old track.
|
Used by Air Control, Howmet, Krestmark and many other patio door manufacturers. Steel ball bearing roller and adjustable 2-5/8 in L x 1-3/8 in H x 3/4 in D steel housing assembly with machine threaded holes (10-32 top and 1/4-20 side) for installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Wright replacement oak patio door handle can be installed on the interior plate of the V1195 or VK1195 flush-mounted latches to provide a larger pulling surface.
|
This is an add-on handle usually used on flush-mounted patio door handles. It has a wood handle grab that is 9-15/16 in long that fastens onto the door with chrome mounting brackets with hole centers of 6-5/8 in apart. Once the handle is installed, it projects out from the door 2 in. It can be installed as a separate handle by using E 2056 binder posts and screws.
|
Black die-cast supports w/wood handle. Mounting posts come finished in black colored paint and the wooden pull handle comes finished in a clear finish. Can be installed on doors with mounting hole centers ranging from 6-1/2 to 6-5/8 in center-2-center. Surface-mounted. Features a sturdy metal backer support behind the wood. Note: Color of wood may vary per shipment.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2-roller tandem design. 6-1/4 in L x 1-3/16 in H x 11/16 in D adjustable steel housing with 2 steel ball bearing rollers.
|
Fits all popular flush lock punch outs for 1 in Thk doors. 3/4 x 2-3/4 in, universal design, die-cast, chrome finish keeper #E-2040 adjusts vertically. Includes 7-1/4 in L x 7/8 in W inside and outside pulls, latch on inside pull, keeper, installation fasteners and 4 assorted hooks (3/8 in, 3/4 in, 1/2 in and 5/8 in). 6-5/8 in installation hole spacing.
|
Steel glass door roller. Housing width: 3/4 in. Roller edge type: Concave. Includes 1 roller assembly.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tandem steel ball bearing roller; adjustable; steel housing assembly. Housing width: 3/4 in. Roller edge type: Concave. Contents: 1 roller assembly.
|
Steel housing and hook, round end face plate. Hook position is adjustable, fits on W&F. Hole center of 3-11/16 in.
|
Mortise Lock for Sliding Patio Doors, 45 deg lever slot. Adaptor faceplate allows for use on wood and vinyl patio doors. 4-5/8 in hole center (hole to hole). 45 deg keyway.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Wright Products flush mount patio door latch will work on both right or left hand door applications. Aluminum finish only.
|
1-1/4 in tandem steel ball bearing rollers; adjustable steel housing; dimensions: thickness 11/16 in; length 3-1/8 in; height 1-1/32 in. Roller edge type: Concave. 2 tandem wheels in roller assembly.
|
For 1 to 1-3/8 in aluminum doors. Internal latching, reversible for right or left hand application. Oak handle. 3-15/16 in installation hole spacing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Surface-mounted; no mortising required. Separate lock inserted into base permits instant reversibility. Has a fixed anti-lift key to resist unauthorized entry by outside manipulation. Retracts to unlocked position if the door is closed with the hook extended. Prevents damage to keeper and lock assembly. Hook style latch.
|
Designed to fit 90% of all internally latched doors including Viking. Reversible for right or left hand openings. Automatic unlatching option to prevent accidental lockouts. #E-2054 stamped steel sliding-glass-door keeper allows for vertical adjustments. Stained solid wood handle, all other parts of finished die-cast aluminum. Includes inside pull and latch, outside pull, keeper and installation fasteners. For 1 in thick door rails.
|
Internally latched, reversible for right or left hand openings. Secondary night lock feature prevents external latch operation for added security. Automatic unlatching option to prevent accidental lockouts. E-2054 stamped steel, sliding glass door keeper allows for vertical adjustments. Stained solid wood handle, all other parts of finished die-cast. Includes inside wood pull and latch, outside pull, keeper and installation fasteners. For 1 in Thk door rails.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Steel mortise latch designed for wood stiles, adjustable bolt throw. Vertical keyway, round faceplate, slanted housing corners. 1000 lb strength.
|
Standard reversible surface-mount for left or right-handed mortise-locking doors. Die-cast inside pull has wood handle, die-cast thumb turn and steel latch activator. Outside pull is die-cast.
|
Replaces patio door handle/latch set. Fits 1 to 1-1/4 in patio doors. 3-15/16 in hole spacing. Includes key for locking mechanism. Aluminum finish and wood handle.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Die-cast construction fits most popular flush lock cutouts. Comes complete with keyed cylinder lock; reversible for left or right hand; complete with 4 different hood lengths. Includes 1 inside latch with deluxe wood pull, 1 outside pull, 1 keeper, installation fasteners, 4 hook assortment and 1 locking cylinder with 2 keys.
|
Die-cast outside pull, inside pull with wood handle, die-cast thumb turns with steel latch activator. Includes one inside pull with thumb latch, one outside pull and installation fasteners.
|
Extruded aluminum inside pull; clamp-latch with metal activator; die-cast outside pull has knockout for converting to keyed cylinder lock; latch hook profile is 1/4 in; projection is 1/2 in; used by many patio door manufacturers. Handle Type: Surface-Mounted. Latch Style: Clamp Style. Contents: 1 inside pull and latch assembly; 1 outside pull; installation fasteners.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hook style latch, designed to fit 90% of all internally latched doors, reversible right or left hand openings, complete with keeper, locking unit with key, automatic unlatching options prevents accidental lockout.
|
Wright Products Door Handle, Locking, Reversible, Aluminum/Wood, Oak, Includes: Key Locking Unit
|
Standard reversible surface mount for left or right handed mortise locking doors. Die-cast inside pull and thumb turn with steel latch activator. Outside pull is die-cast and has a removable knockout plug for adding a key cylinder. Note: Mounting holes may need to be enlarged to 5/16 in Dia if base of handle does not seat flush against surface of door.
|
|
|
|
|
|
|
|
|
|
|
|
|
Reversible surface mount for left or right handed mortise locking doors. Die-cast inside pull and thumb turn with hook style steel latch activator. Outside pull is die-cast and must use an E-2145 if key locking feature is desired. NOTE: Latch Lever is offset from center.
|
|
|
