|
|
|
|
|
|
|
|
|
|
|
|
|
|
Can be used in all types of masonry. Corrosion resistant. It is internally threaded and installs flush to surface.
|
Can be used in all types of masonry. Corrosion resistant. It is internally threaded and installs flush to surface.
|
Can be used in all types of masonry. Corrosion resistant. It is internally threaded and installs flush to surface.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Can be used in all types of masonry. Corrosion resistant. It is internally threaded and installs flush to surface.
|
Corrosion resistant. It is internally threaded and it installs flush to surface.
|
Corrosion resistant. It is internally threaded and it installs flush to surface.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Can be used in all types of masonry. Corrosion resistant. It is internally threaded and installs flush to surface.
|
The Parawedge? anchor stud is cold formed and consists of a threaded section with standard coarse bolt threads at one end and a parabolic shaped taper mandrel neck at the opposite end for a smoother expansion. It has a 360 deg clip for more contact, a torque controlled expansion and can be installed into a bottomless hole.
|
Can be used in all types of masonry. Corrosion resistant. It is internally threaded and installs flush to surface.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Parawedge? anchor stud is cold formed and consists of a threaded section with standard coarse bolt threads at one end and a parabolic shaped taper mandrel neck at the opposite end for a smoother expansion. It has a 360 deg clip for more contact, a torque controlled expansion and can be installed into a bottomless hole.
|
Pre-assembled, all-purpose medium duty anchor. One-step installation. Corrosion resistant. A masonry drill bit is included in all "R" packs of 4 pieces.
|
Pre-assembled, all-purpose medium duty anchor. One-step installation. Corrosion resistant. A masonry drill bit is included in all "R" packs of 4 pieces.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Parawedge? anchor stud is cold formed and consists of a threaded section with standard coarse bolt threads at one end and a parabolic shaped taper mandrel neck at the opposite end for a smoother expansion. It has a 360 deg clip for more contact, a torque controlled expansion and can be installed into a bottomless hole.
|
RED HEAD Concrete Wedge Anchor, 1/2 in Dia, 7 in L, Hex Head, Steel, Zinc, Silver
|
Red Head Wedge Anchor, 5/8 in Dia, 8-1/2 in L, Steel, Silver
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Parawedge? anchor stud is cold formed and consists of a threaded section with standard coarse bolt threads at one end and a parabolic shaped taper mandrel neck at the opposite end for a smoother expansion. It has a 360 deg clip for more contact, a torque controlled expansion and can be installed into a bottomless hole.
|
The drive nail anchor is easy to install and ideal for light-duty and tamperproof applications in any type of masonry. It is a two-piece nail-in anchor comprised of a corrosion-resistant die-cast zinc alloy anchor body, with the choice of a steel or stainless steel nail.
|
Pre-assembled, all-purpose medium duty anchor. One-step installation. Corrosion resistant. A masonry drill bit is included in all "R" packs of 4 pieces.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The drive nail anchor is easy to install and ideal for light-duty and tamperproof applications in any type of masonry. It is a two-piece nail-in anchor comprised of a corrosion-resistant die-cast zinc alloy anchor body, with the choice of a steel or stainless steel nail.
|
The drive nail anchor is easy to install and ideal for light-duty and tamperproof applications in any type of masonry. It is a two-piece nail-in anchor comprised of a corrosion-resistant die-cast zinc alloy anchor body, with the choice of a steel or stainless steel nail.
|
The drive nail anchor is easy to install and ideal for light-duty and tamperproof applications in any type of masonry. It is a two-piece nail-in anchor comprised of a corrosion-resistant die-cast zinc alloy anchor body, with the choice of a steel or stainless steel nail.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The drive nail anchor is easy to install and ideal for light-duty and tamperproof applications in any type of masonry. It is a two-piece nail-in anchor comprised of a corrosion-resistant die-cast zinc alloy anchor body, with the choice of a steel or stainless steel nail.
|
TruBolt wedge anchors offer maximum strength and ultimate flexibility making them the PRO choice for heavy-duty anchoring. This wedge anchor features a high-strength body that is built to resist tension and shear loads and it is code approved for use in uncracked concrete. For additional application versatility, TruBolt wedge anchors are fully threaded to accommodate a greater range of fixture thicknesses. The wedge anchor's stainless steel clip provides extended corrosion resistance to ensure the long-term integrity of connections.
|
Code listed for cracked and uncracked concrete and masonry applications, the Strong-Bolt 2 wedge-type expansion anchor is an optimal choice for high-performance even in seismic and high-wind conditions. Dual undercutting embossments on each clip segment enable secondary expansion should a crack form and intersect the anchor location; this feature significantly increases the ability of Strong-Bolt 2 to carry load if the hole expands.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pre-assembled, all-purpose medium duty anchor. One-step installation. Corrosion resistant. A masonry drill bit is included in all "R" packs of 4 pieces.
|
Code listed for cracked and uncracked concrete and masonry applications, the Strong-Bolt 2 wedge-type expansion anchor is an optimal choice for high-performance even in seismic and high-wind conditions. Dual undercutting embossments on each clip segment enable secondary expansion should a crack form and intersect the anchor location; this feature significantly increases the ability of Strong-Bolt 2 to carry load if the hole expands.
|
Can be removed and reinstalled. Torque controlled expansion. Made of grade 5 steel, bolt increases the shear load by 30%. A masonry drill bit is included in all packs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Can be used in all types of masonry. Corrosion resistant. It is internally threaded and installs flush to surface.
|
The Parawedge? anchor stud is cold formed and consists of a threaded section with standard coarse bolt threads at one end and a parabolic shaped taper mandrel neck at the opposite end for a smoother expansion. It has a 360 deg clip for more contact, a torque controlled expansion and can be installed into a bottomless hole.
|
Can be removed and reinstalled. Torque controlled expansion. Made of grade 5 steel, bolt increases the shear load by 30%. A masonry drill bit is included in all packs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Can be used in all types of masonry. Corrosion resistant. It is internally threaded and installs flush to surface.
|
Can be removed and reinstalled. Torque controlled expansion. Made of grade 5 steel, bolt increases the shear load by 30%. A masonry drill bit is included in all packs.
|
The Zamac Nailin? is a nail drive anchor which has a body formed from Zamac alloy. The anchor can be used in concrete, block, brick or stone. A corrosion-resistant Zamac alloy is used to form the anchor body with either a mushroom or flat head. The anchor can be used for light-duty, tamper-proof applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Parawedge? anchor stud is cold formed and consists of a threaded section with standard coarse bolt threads at one end and a parabolic shaped taper mandrel neck at the opposite end for a smoother expansion. It has a 360 deg clip for more contact, a torque controlled expansion and can be installed into a bottomless hole.
|
Red Head Concrete Wedge Anchor, 3/8 in Dia, 2-1/4 in L, Head Type: Hex, Steel, Zinc, Silver
|
The Zamac Nailin? is a nail drive anchor which has a body formed from Zamac alloy. The anchor can be used in concrete, block, brick or stone. A corrosion-resistant Zamac alloy is used to form the anchor body with either a mushroom or flat head. The anchor can be used for light-duty, tamper-proof applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Red Head Concrete Wedge Anchor, 3/8 in Dia, 3-3/4 in L, Head Type: Hex, Steel, Zinc, Silver
|
Red Head Concrete Wedge Anchor, 1/2 in Dia, 3-3/4 in L, Head Type: Hex, Steel, Zinc, Silver
|
Code listed for cracked and uncracked concrete and masonry applications, the Strong-Bolt 2 wedge-type expansion anchor is an optimal choice for high-performance even in seismic and high-wind conditions. Dual undercutting embossments on each clip segment enable secondary expansion should a crack form and intersect the anchor location; this feature significantly increases the ability of Strong-Bolt 2 to carry load if the hole expands.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Can be removed and reinstalled. Torque controlled expansion. Made of grade 5 steel, bolt increases the shear load by 30%. A masonry drill bit is included in all packs.
|
Red Head Concrete Wedge Anchor, 1/2 in Dia, 4-1/4 in L, Head Type: Hex, Steel, Zinc, Silver
|
The Parawedge? anchor stud is cold formed and consists of a threaded section with standard coarse bolt threads at one end and a parabolic shaped taper mandrel neck at the opposite end for a smoother expansion. It has a 360 deg clip for more contact, a torque controlled expansion and can be installed into a bottomless hole.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Can be removed and reinstalled. Torque controlled expansion. Made of grade 5 steel, bolt increases the shear load by 30%. A masonry drill bit is included in all packs.
|
Trubolt? Wedge anchors feature a stainless steel expansion clip, threaded stud body, nut and washer. Anchor bodies are made of plated carbon steel, hot-dipped galvanized carbon steel, type 304 stainless steel or type 316 stainless steel as identified in the drawings or other notations. The exposed end of the anchor is stamped to identify anchor length. Stampings should be preserved during installation for any subsequent embedment verification. Use carbide tipped hammer drill bits made in accordance with ANSI B212.15-1994 to install anchors. Anchors are tested to ACI 355.2 and ICC-ES AC193.
|
The Parawedge? anchor stud is cold formed and consists of a threaded section with standard coarse bolt threads at one end and a parabolic shaped taper mandrel neck at the opposite end for a smoother expansion. It has a 360 deg clip for more contact, a torque controlled expansion and can be installed into a bottomless hole.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Red Head Concrete Wedge Anchor, 3/8 in Dia, 5 in L, Head Type: Hex, Steel, Zinc, Silver
|
For fastening applications in solid concrete. Contractor-grade anchors. Internally threaded. For overhead applications, transformers and meters, ceiling fans, electrical light fixtures.
|
For fastening applications in concrete, block and brick. For brackets, drywall track, gutters and down spouts, electrical boxes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Power-Stud? Plus SD1 anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The anchor is manufactured with a zinc-plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
|
For fastening applications in concrete, block and brick. For brackets, drywall track, gutters and down spouts, electrical boxes.
|
Code listed for cracked and uncracked concrete and masonry applications, the Strong-Bolt 2 wedge-type expansion anchor is an optimal choice for high-performance even in seismic and high-wind conditions. Dual undercutting embossments on each clip segment enable secondary expansion should a crack form and intersect the anchor location; this feature significantly increases the ability of Strong-Bolt 2 to carry load if the hole expands.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TruBolt wedge anchors offer maximum strength and ultimate flexibility making them the PRO choice for heavy-duty anchoring. This wedge anchor features a high-strength body that is built to resist tension and shear loads and it is code approved for use in uncracked concrete. For additional application versatility, TruBolt wedge anchors are fully threaded to accommodate a greater range of fixture thicknesses. The wedge anchor's stainless steel clip provides extended corrosion resistance to ensure the long-term integrity of connections.
|
Code listed for cracked and uncracked concrete and masonry applications, the Strong-Bolt 2 wedge-type expansion anchor is an optimal choice for high-performance even in seismic and high-wind conditions. Dual undercutting embossments on each clip segment enable secondary expansion should a crack form and intersect the anchor location; this feature significantly increases the ability of Strong-Bolt 2 to carry load if the hole expands.
|
The Parawedge? anchor stud is cold formed and consists of a threaded section with standard coarse bolt threads at one end and a parabolic shaped taper mandrel neck at the opposite end for a smoother expansion. It has a 360 deg clip for more contact, a torque controlled expansion and can be installed into a bottomless hole.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Code listed for cracked and uncracked concrete and masonry applications, the Strong-Bolt 2 wedge-type expansion anchor is an optimal choice for high-performance even in seismic and high-wind conditions. Dual undercutting embossments on each clip segment enable secondary expansion should a crack form and intersect the anchor location; this feature significantly increases the ability of Strong-Bolt 2 to carry load if the hole expands.
|
Code listed for cracked and uncracked concrete and masonry applications, the Strong-Bolt 2 wedge-type expansion anchor is an optimal choice for high-performance even in seismic and high-wind conditions. Dual undercutting embossments on each clip segment enable secondary expansion should a crack form and intersect the anchor location; this feature significantly increases the ability of Strong-Bolt 2 to carry load if the hole expands.
|
TruBolt? wedge anchors offer maximum strength and ultimate flexibility making them the PRO choice for heavy-duty anchoring. This wedge anchor features a high-strength body that is built to resist tension and shear loads and it is code approved for use in uncracked concrete per ICC-ES ESR-2251. Not only is TruBolt? code recognized, but this wedge anchor offers a full line of diameter options and a variety of lengths. For additional application versatility, TruBolt? wedge anchors are fully threaded to accommodate a greater range of fixture thicknesses. The wedge anchor's stainless steel clip provides extended corrosion resistance to ensure the long term integrity of connections.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Code listed for cracked and uncracked concrete and masonry applications, the Strong-Bolt 2 wedge-type expansion anchor is an optimal choice for high-performance even in seismic and high-wind conditions. Dual undercutting embossments on each clip segment enable secondary expansion should a crack form and intersect the anchor location; this feature significantly increases the ability of Strong-Bolt 2 to carry load if the hole expands.
|
Code listed for cracked and uncracked concrete and masonry applications, the Strong-Bolt 2 wedge-type expansion anchor is an optimal choice for high-performance even in seismic and high-wind conditions. Dual undercutting embossments on each clip segment enable secondary expansion should a crack form and intersect the anchor location; this feature significantly increases the ability of Strong-Bolt 2 to carry load if the hole expands.
|
Code listed for cracked and uncracked concrete and masonry applications, the Strong-Bolt 2 wedge-type expansion anchor is an optimal choice for high-performance even in seismic and high-wind conditions. Dual undercutting embossments on each clip segment enable secondary expansion should a crack form and intersect the anchor location; this feature significantly increases the ability of Strong-Bolt 2 to carry load if the hole expands.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TruBolt wedge anchors offer maximum strength and ultimate flexibility making them the PRO choice for heavy-duty anchoring. This wedge anchor features a high-strength body that is built to resist tension and shear loads and it is code approved for use in uncracked concrete. For additional application versatility, TruBolt wedge anchors are fully threaded to accommodate a greater range of fixture thicknesses. The wedge anchor's stainless steel clip provides extended corrosion resistance to ensure the long-term integrity of connections.
|
For fastening applications in concrete, hollow block, grout filled block and brick. Contractor-grade anchors. Anchor diameter equals hole diameter. Applications: Machinery and supports, window frames, partitions, cabinets and shelves, duct straps, pipe support.
|
For fastening applications in solid concrete. Contractor-grade anchors. Internally threaded. For overhead applications, transformers and meters, ceiling fans, electrical light fixtures.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Code listed for cracked and uncracked concrete and masonry applications, the Strong-Bolt 2 wedge-type expansion anchor is an optimal choice for high-performance even in seismic and high-wind conditions. Dual undercutting embossments on each clip segment enable secondary expansion should a crack form and intersect the anchor location; this feature significantly increases the ability of Strong-Bolt 2 to carry load if the hole expands.
|
The Power-Stud? Plus SD1 anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The anchor is manufactured with a zinc-plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
|
The Power-Stud? Plus SD1 anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The anchor is manufactured with a zinc-plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Red Head Concrete Wedge Anchor, 1/2 in Dia, 7 in L, Head Type: Hex, Steel, Hot-Dipped Galvanized, Silver
|
TruBolt wedge anchors offer maximum strength and ultimate flexibility making them the PRO choice for heavy-duty anchoring. This wedge anchor features a high-strength body that is built to resist tension and shear loads and it is code approved for use in uncracked concrete. For additional application versatility, TruBolt wedge anchors are fully threaded to accommodate a greater range of fixture thicknesses. The wedge anchor's stainless steel clip provides extended corrosion resistance to ensure the long-term integrity of connections.
|
Pre-assembled, all-purpose medium duty anchor. One-step installation. Corrosion resistant. A masonry drill bit is included in all "R" packs of 4 pieces.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Code listed for cracked and uncracked concrete and masonry applications, the Strong-Bolt 2 wedge-type expansion anchor is an optimal choice for high-performance even in seismic and high-wind conditions. Dual undercutting embossments on each clip segment enable secondary expansion should a crack form and intersect the anchor location; this feature significantly increases the ability of Strong-Bolt 2 to carry load if the hole expands.
|
Red Head Wedge Anchor, 1/2 in Dia, 5-1/2 in L, Head Type: Hex Nut, Steel, Hot-Dipped Galvanized, Silver
|
TruBolt? wedge anchors offer maximum strength and ultimate flexibility making them the PRO choice for heavy-duty anchoring. This wedge anchor features a high-strength body that is built to resist tension and shear loads and it is code approved for use in uncracked concrete per ICC-ES ESR-2251. Not only is TruBolt? code recognized, but this wedge anchor offers a full line of diameter options and a variety of lengths. For additional application versatility, TruBolt? wedge anchors are fully threaded to accommodate a greater range of fixture thicknesses. The wedge anchor's stainless steel clip provides extended corrosion resistance to ensure the long term integrity of connections.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TruBolt? wedge anchors offer maximum strength and ultimate flexibility making them the PRO choice for heavy-duty anchoring. This wedge anchor features a high-strength body that is built to resist tension and shear loads and it is code approved for use in uncracked concrete per ICC-ES ESR-2251. Not only is TruBolt? code recognized, but this wedge anchor offers a full line of diameter options and a variety of lengths. For additional application versatility, TruBolt? wedge anchors are fully threaded to accommodate a greater range of fixture thicknesses. The wedge anchor's stainless steel clip provides extended corrosion resistance to ensure the long term integrity of connections.
|
Code listed for cracked and uncracked concrete and masonry applications, the Strong-Bolt 2 wedge-type expansion anchor is an optimal choice for high-performance even in seismic and high-wind conditions. Dual undercutting embossments on each clip segment enable secondary expansion should a crack form and intersect the anchor location; this feature significantly increases the ability of Strong-Bolt 2 to carry load if the hole expands.
|
TruBolt wedge anchors offer maximum strength and ultimate flexibility making them the PRO choice for heavy-duty anchoring. This wedge anchor features a high-strength body that is built to resist tension and shear loads and it is code approved for use in uncracked concrete. For additional application versatility, TruBolt wedge anchors are fully threaded to accommodate a greater range of fixture thicknesses. The wedge anchor's stainless steel clip provides extended corrosion resistance to ensure the long-term integrity of connections.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Code listed for cracked and uncracked concrete and masonry applications, the Strong-Bolt 2 wedge-type expansion anchor is an optimal choice for high-performance even in seismic and high-wind conditions. Dual undercutting embossments on each clip segment enable secondary expansion should a crack form and intersect the anchor location; this feature significantly increases the ability of Strong-Bolt 2 to carry load if the hole expands.
|
The Spike? is a one-piece, vibration-resistant anchor for use in concrete block or stone. The Spike? anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-formed, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.
|
The Power-Stud? Plus SD1 anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The anchor is manufactured with a zinc-plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Power-Stud? Plus SD1 anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The anchor is manufactured with a zinc-plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
|
TruBolt? wedge anchors offer maximum strength and ultimate flexibility making them the PRO choice for heavy-duty anchoring. This wedge anchor features a high-strength body that is built to resist tension and shear loads and it is code approved for use in uncracked concrete per ICC-ES ESR-2251. Not only is TruBolt? code recognized, but this wedge anchor offers a full line of diameter options and a variety of lengths. For additional application versatility, TruBolt? wedge anchors are fully threaded to accommodate a greater range of fixture thicknesses. The wedge anchor's stainless steel clip provides extended corrosion resistance to ensure the long term integrity of connections.
|
The Power-Stud? Plus SD1 anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The anchor is manufactured with a zinc-plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Fastener Concrete Wedge Anchor, 3/8 in Dia, 2-3/4 in L, Zinc
|
Code listed for cracked and uncracked concrete and masonry applications, the Strong-Bolt 2 wedge-type expansion anchor is an optimal choice for high-performance even in seismic and high-wind conditions. Dual undercutting embossments on each clip segment enable secondary expansion should a crack form and intersect the anchor location; this feature significantly increases the ability of Strong-Bolt 2 to carry load if the hole expands.
|
The Power-Stud? Plus SD1 anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The anchor is manufactured with a zinc-plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Fastener Concrete Wedge Anchor, 5/8 in Dia, 6 in L, Zinc, Zinc
|
Midwest Fastener Lag Expansion Shield, Zinc
|
The Spike is a, one-piece, vibration-resistant anchor for use in concrete block or stone. Several head styles, including tamperproof versions and anchor materials are available. The Spike anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-formed, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Code listed for cracked and uncracked concrete and masonry applications, the Strong-Bolt 2 wedge-type expansion anchor is an optimal choice for high-performance even in seismic and high-wind conditions. Dual undercutting embossments on each clip segment enable secondary expansion should a crack form and intersect the anchor location; this feature significantly increases the ability of Strong-Bolt 2 to carry load if the hole expands.
|
Midwest Fastener Concrete Wedge Anchor, 1/2 in Dia, 2-3/4 in L, Zinc, Zinc
|
The Power-Stud? Plus SD1 anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The anchor is manufactured with a zinc-plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
|
|
|
